• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.307-310
• /
• 1997

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirement. Therefore, in order to solve this problem, a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, poerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably as shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuvy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.4
• /
• pp.363-372
• /
• 1997

In this paper, the design and the implementation of the adaptive learning rate neural network controller for an articulate robot, which is being developed (or) has been developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies hardware structures by the time-division control with TMS32OC31 DSP chip. Proposed neural network controller with adaptive learning rate structure using expert's heuristics can improve learning speed. The proposed controller verifies its superiority by comparing response characteristics of conventional controller with those of the proposed controller that are obtained from the experiments for the 5 axis vertical articulated robot. We, also, present the generalization property of proposed controller for unlearned trajectory and the change of load through experimental data.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.315-320
• /
• 2005

This paper is proposed adaptive fuzzy-neuro controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of nor measured between the motor speed and output of a reference model. The control performance of the adaptive fuzy-neuro controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1248-1250
• /
• 2004

This paper is proposed adaptive fuzzy-neural network controller(NFC) for speed control of surface permanent magnet synchronous motor(SPMSM) drive. The design of this algorithm based on NFC that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive NFC is evaluated by analysis for various operating conditions. The results of analysis prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.704-711
• /
• 2014

This paper proposes a combined fuzzy adaptive sliding-mode voltage controller (FASVC) for a three-phase UPS inverter. The proposed FASVC encapsulates two control terms: a fuzzy adaptive compensation control term, which solves the problem of parameter uncertainties, and a sliding-mode feedback control term, which stabilizes the error dynamics of the system. To extract precise load current information, the proposed method uses a conventional load current observer instead of current sensors. In addition, the stability of the proposed control scheme is fully guaranteed by using the Lyapunov stability theory. It is shown that the proposed FASVC can attain excellent voltage regulation features such as a fast dynamic response, low total harmonic distortion (THD), and a small steady-state error under sudden load disturbances, nonlinear loads, and unbalanced loads in the existence of the parameter uncertainties. Finally, experimental results are obtained from a prototype 1 kVA three-phase UPS inverter system via a TMS320F28335 DSP. A comparison of these results with those obtained from a conventional sliding-mode controller (SMC) confirms the superior transient and steady-state performances of the proposed control technique.

• Structural Engineering and Mechanics
• /
• v.47 no.1
• /
• pp.45-58
• /
• 2013

In structural reliability analysis, the response surface method is a powerful method to evaluate the probability of failure. However, the location of experimental points used to form a response surface function must be selected in a judicious way. It is necessary for the highly nonlinear limit state functions to consider the design point and the nonlinear trend of the limit state, because both of them influence the probability of failure. In this paper, in order to approximate the actual limit state more accurately, experimental points are selected close to the design point and the actual limit state, and consider the nonlinear trend of the limit state. Linear, quadratic and cubic polynomials without mixed terms are utilized to approximate the actual limit state. The direct Monte Carlo simulation on the approximated limit state is carried out to determine the probability of failure. Four examples are given to demonstrate the efficiency and the accuracy of the proposed method for both numerical and implicit limit states.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.445-448
• /
• 1996

For a lightly damped system, IIR based filter can have better performance than FIR filter as an adaptive filter in ANC algorithm. IIR based filter which has an infinite impulse response can model a lightly damped acoustic system with a small number of weights compared that of FIR filter and has no nonlinearity and instability problems on weight updating process which are associated to the conventional IIR filters. There are, however, some drawbacks such as design parameters to be determined earlier to get better performance and much increased computational power especially in the presence of error path. In this study, base filter parameters are determined in systematic manner, with the knowledge of the nominal impulse response of the system which should be identified, by Prony's method. Three methods reducing the computational load are proposed and their performance and application limits are discussed. Simulation and experimental results demonstrate the feasibility of the proposed method.

• International Journal of Reliability and Applications
• /
• v.2 no.3
• /
• pp.209-240
• /
• 2001

Computer-based simulation and analysis is used extensively in engineering for a variety of tasks. Despite the steady and continuing growth of computing power and speed, the computational cost of complex high-fidelity engineering analyses and simulations limit their use in important areas like design optimization and reliability analysis. Statistical approximation techniques such as design of experiments and response surface methodology are becoming widely used in engineering to minimize the computational expense of running such computer analyses and circumvent many of these limitations. In this paper, we compare and contrast five experimental design types and four approximation model types in terms of their capability to generate accurate approximations for two engineering applications with typical engineering behaviors and a wide range of nonlinearity. The first example involves the analysis of a two-member frame that has three input variables and three responses of interest. The second example simulates the roll-over potential of a semi-tractor-trailer for different combinations of input variables and braking and steering levels. Detailed error analysis reveals that uniform designs provide good sampling for generating accurate approximations using different sample sizes while kriging models provide accurate approximations that are robust for use with a variety of experimental designs and sample sizes.

• Journal of Korean Physical Therapy Science
• /
• v.8 no.2
• /
• pp.977-987
• /
• 2001

The purpose of this study was to examine the effects of sensory integration therapy (SIT) on sensory' motor development and adaptive behavior of cerebral palsy children. The design of this study was quasi experiments with a non-equivalent pre- and post-test control design. Subjects of the study were arbitrarily chosen based on predetermined selection criteria among the cerebral palsy children who were treated as out-patients at two rehabilitation hospitals one in Seoul, and the other in Kyunggi-do. The study was conducted between early April and late July in 2000. Fifteen children were in the experimental group and eleven in the control group. The allocation was done based on ease of experimental treatment. A five-step SIT program was devised from a combination of SIT programs suggested by Ayres(1985) and Finks(1989), and an author-designed SIT program for cerebral palsy children. The experimental group was subjected to 20 to 30 minutes of SIT per session. two sessions a week for ten -week period. The effects of SIT were measured with respect to 9 sub-areas that can be administered to cerebral palsy children out of a total of 17 sub-areas in the Southern California Sensory Integration Test (SCSIT) developed by Ayres (1980). In addition. the scale developed by Russell (1993) for Gross Motor Function Measure (GMFM). and Perception Motor Development Test developed by 中司利一 et al.(1987) were also applied. Adaptive behavior was analyzed using guidelines in two unpublished documents - School-Age Checklist for Occupational Therapy by the Wakefield Occupational Therapy Associates, and the OTA-Watertown Clinical Assessment by the Watertown Occupational Therapy Associates-, and an author-developed Adaptive Behavior Checklist. Collected data were statistically analyzed by SPSS PC for chi square test, Mann-Whitney test, Wilcoxon signed rank test, and paired t-test. The results were as follows: 1. In sensory development, the experimental group exhibited a score increase compared to the control group, but the difference was not statistically significant, Although the experimental group showed improvements in all. 9 sub-areas compared to the control group, only right-left discrimination exhibited statistically significant change. 2. In gross motor development, the experimental group showed improvements in score compared to the control group, but it was not statistically significant. In fine motor development, the experimental group exhibited statistically significant improvements compared to the control group. In sub-area analysis, figure synthesis showed positive change. 3. In adaptive behavior development, post-experimental adaptive behavior scores were higher compared to pre-experimental scores with statistical significance. Furthermore, sub-areas emotional behavior, perception behavior, gross-fine motor function, oral-respiration function, motor behavior, motor planning, and adaptive response exhibited higher scores after SIT. In conclusion SIT was found to be partially effective in sensory and fine motor development, effective in all adaptive behavior areas, and not effective in gross motor development. Thus, this study has shown that SIT is an effective intervention for sensory development, fine motor development, and adaptive behavior for cerebral palsy children. But, for the effectiveness of SIT on gross motor development, further studies employing longer-time experiments are recommended.