• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.317-322
• /
• 2003

In this paper, we design a slow-wave bandpass filter that uses a microstrip line periodically loaded with microstrip ing resonators for WLAN(5 GHz). Unlike conventional slow-wave filters, this filter is designed to produce a narrow passband at the fundamental mode of the resonators and provide lower insertion loss than that of parallel- or cross-coupled ring bandpass filters. A PBG(Photonic Band Gap) structure patterned in the ground plane is used to suppress the spurious transmission and extend out-of-band rejections Experimental result shows that the first spurious response in the stopband of the slow-wave bandpass filter can be rejected using a PBG structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.69-70
• /
• 2008

Micro resonators have been actively investigated for bio/chemical sensors and RF M/NEMS devices. Among various materials, SiC is a very promising material for micro/nano resonators since the ratio of its Young's modulus, E, to mass density, $\rho$, is significantly higher than other semiconductor materials, such as, Si and GaAs. Polycrystalline 3C-SiC cantilever with different lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and its fundamental resonance was measured by a laser vibrometer in air and vacuum at room temperature, respectively. For the cantilever with $100{\mu}m$ length, $10{\mu}m$width and $1.3{\mu}m$ thickness, the fundamental frequency appeared at 147.2 kHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.740-743
• /
• 2003

A multi-layer ceramic (MLC) chip type band-pass filter (BPF) is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coulped stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The passband and attenuation pole depend on the coupling between resonators and coupling capacitance. The frequency characterics of the passband and attenuation pole are analyzed with the variation of the coupling between resonators and coupling capacitance. An equivanlent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the BPF is well acceptable for IMT-2000 application.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.282-285
• /
• 2010

We printed a one-dimensional array of metallic wires and a two-dimensional array of metallic split ring resonators on a photo-paper by using a high-dots-per-inch resolution printer and an ink with silver nano-particles. The printed sample sizes are $1.0{\times}1.0cm^2$. The transmission measured by a terahertz time domain spectroscopy system shows that the arrays of wires and split ring resonators could act as polarizers and band-stop filters, respectively, in a terahertz frequency region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.3
• /
• pp.105-114
• /
• 1985

2-port stable bipolar transistor oscillator is realized in S band. Oscillator is fabricated by using a highly frequency stabilized 3 identical dielectric resonators and negative resistance is found by means of 3 ports scattering parameters. In this paper, using dielectric resonators as a feedback element. We obtained maximum output 14dBm. 10dBm from collector and base respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.37-45
• /
• 2002

We described a method of resonant mode identification in dielectric-disc loaded cylindrical cavity resonators. The characteristic equations are solved using the ContourPlot graph of Mathematica. Contour graph method uses graphical method. It is comparable with numerical method. The numerical method is very difficult mode identification. The analysis is based on the approximated electromagnetic representation which is only concentrated on the calculation of resonant frequencies, and a mode identification of resonant frequencies has not been covered. However, It is possible to calculate precise resonant frequencies and to identify the mode of resonant frequencies using the contour graph method. The contour graph method is not a method using approximated representation of electromagnetic field variation at the outer area of dielectric in the resonators. It is a method using enact representation.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.67-73
• /
• 2016

This paper presents simple expressions for the effective permeability of bulk metamaterial consisting of ring resonators (RRs) or split ring resonators (SRRs) based on the convenient geometrical factors of the structure compared with wavelength. The resonant frequency dependence of the medium permeability, including loss effects, is analyzed in detail. Inverting the analysis equations, useful design (or synthesis) equations are derived for a systematic design process with some examples. This paper may particularly be useful for the design of a bulk metamaterial with a specific negative relative permeability at a desired frequency. The loss of metamaterials consisting of RRs (or SRRs) is also analyzed over a wide frequency band from 10 MHz to 10 THz.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.185-188
• /
• 2012

A compact monopole antenna possessing triple resonance ($f_1$, $f_2$, $f_3$) characteristics for (USB) dongle applications is presented. The resonance characteristic $f_1$ is determined by the overall length of the antenna. The monopole antenna acts as the main radiator for $f_3$ as well as the coupling feeding structure for the parasitic resonators in $f_1$, $f_2$. The resonance characteristic $f_2$ is achieved by a combination of the capacitance formed by the coupling between the top and bottom parasitic substrate resonators and the inductance generated by a via bridging the two parasitic resonators.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.193-197
• /
• 2008

On the purpose of increasing resonant frequency without sacrificing quality factor as well as much decreasing dimensions, corrugated micro beam resonator based on polycrystalline 3C-SiC films is the applicable solution. In this work, appropriate corrugated structure is suggested to increase resonant frequency of resonators. Micro beam resonators based on 3C-SiC films which have a two-side corrugation along the length of beams were simulated by finite element method and compared to a same-size flat rectangular. With the dimension of 36x12x0.5 ${\mu}m^{3}$, the flat cantilever has resonant frequency of 746 kHz. Meanwhile, with this size but corrugation width of 6 ${\mu}m$ and depth of 0.4 ${\mu}m$, the corrugated cantilever reaches the resonant frequency at 1.252 MHz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.374-379
• /
• 2013

Helmholtz resonators have high transmission loss in a narrow band at the resonance frequency. The transmission loss characteristics of resonators at high sound pressure levels can change due to variations of the impedance as a result of nonlinear behavior. Different sound pressure levels are applied to each resonator when resonators were arranged along the path. Therefore, impedance variation due to incident sound pressure level should be considered in order to predict the transmission loss.