• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.389-392
• /
• 2001

In this paper, we have explained electrical characteristics of a step-down Rosen type piezoelectric transformer for AC-adapter. When the electric voltage is applied to the driving piezoelectric vibrator polarized in the longitudinal direction, then output voltage is generated at the generating piezoelectric vibrator polarized in the thickness direction due to the piezoelectric effects. Output voltage and current from a 11-layered and a 13-layered piezoelectric transformer were measured under the various conditions of loads and frequencies. We measured resonant frequency from impedance curve. It was shown from experiments that output voltage has increased and resonant frequency has changed according to various resistor loads. Output current has changed inversely proportional to resistances.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.450-459
• /
• 2015

In this paper, the safety distances and maximum permissible power (MPP) of resonant wireless power transfer systems are defined and derived with regard to human exposure to electromagnetic field (EMF). The definition is based on the calculated induced current density and electric field in the standard human model located between the transmitting and receiving coil. In order to avoid the adverse health effects such as stimulation of nerve tissues, the induced current and electric field must not exceed the basic restriction values specified in EMF safety guidelines. The different combinations of diameters of the coils and the distance between the two coils are investigated and their effects are analyzed. Two versions of EMF safety guidelines (ICNIRP 1998 and ICNIRP 2010) are used as bases for safety distance calculation and the difference between the two guidelines are discussed.

• 한국지반공학회논문집
• /
• 제22권5호
• /
• pp.47-57
• /
• 2006

전단파는 흙 입자의 강성과 밀도에 연관된다. 흡 입자의 전단 강성은 물의 존재 여부에 영향을 받지 않는다. 벤더 엘리먼트는 흙과 트랜스듀서 간의 뛰어난 결합 효과를 보여 토질 시험 장치에 적용하기에 편리한 전단파 트랜스듀서이다. 본 논문은 전단파의 기본 원리를 살펴본 뒤, 전자기 커플링 방지, 지향성(directivity), 공진주파수, 초동 추정, 근접장 효과 등을 포함하여 벤더 엘리먼트의 설계와 설치에 대하여 다루었다. 전해질 용액 속에서의 전기적 간섭(cross-talk)현상은 병렬 타입의 벤더 엘리먼트를 사용함으로써 최소화할 수 있다. 캔틸레버 보 형식의 벤더 엘리먼트는 전단파의 지향성은 원형에 가깝게 나타났다. 벤더 엘리먼트의 공진주파수는 벤더 엘리먼트 자체의 특성, 흡의강성 및 엥커 특성에 의존적인 것으로 나타났다. 벤더 엘리멘트 시험에서 가장 어려운 부분 중의 하나는 전단파의 도착시간에 영향을 주는 근접장 효과이다. 근접장 내에서 전단파의 도착시간 산정은 다중반사법(multiple reflection method)과 signal matching 기술을 적용하여 해결할 수 있다. 여러 가지 고려사항이 요구되는 벤더 엘리먼트는 전단파를 이용한 지반 동적 특성 파악에 매우 효과적인 방법이 될 수 있을 것이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.633-636
• /
• 2003

본 논문에서는 ZnO를 사용한 다층 박막 SMR 소자의 공진 특성을 개선하기 위해서 실리콘 기판 상부에 형성된 W/SiO$_2$의 Bragg reflector를 thermal annealing한다. SMR 소자의 공진 특성은 Bragg reflector에 적응된 annealing 조건에 의존함을 관찰할 수 있었다. annealing을 하지 않은 Bragg reflector를 갖는 SMR 소자와 비교했을 경우, 40$0^{\circ}C$/30min의 조건으로 annealing된 Bragg reflector를 갖는 SMR 소자가 가장 훌륭한 공진특성을 나타내었다. 새롭게 제안된 annealing 공정은 W/SiO$_2$ 다층 박막 Bragg reflector를 갖는 SMR 소자의 공진 특성을 효과적으로 개선시키는데 있어 매우 유용할 것으로 보인다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.345-352
• /
• 2000

It is very important to evaluate the reliable nonlinear modulus characteristics of soils not only in the analysis of geotechnical structures under working stress conditions but also for the soil dynamic problems. For the evaluation of modulus characteristics of soils, various tests have been mostly employed in laboratory. However, different testing techniques are likely to have different ranges of reliable strain measurements, different applied stress level, and different loading frequencies, and the modulus of soils can be affected by these variables. For reliable evaluation, therefore, those effects on the modulus need to be considered, and measured values should be effectively adjusted to actual conditions where the soil is working. In this paper, to evaluate the modulus characteristics of soils, laboratory testing such as free-free resonant column (FF-RC), resonant column (RC), torsional shear (TS), static TX, and cyclic M/sub R/ tests were performed. The effects of strain amplitude, loading frequency, loading cycles, confining pressure, density, and water content on modulus were investigated. It is shown that the FF-RC test, which is simple and inexpensive testing technique, can provide a reliable estimation of small strain Young's modulus (E/sub max/), and the modulus evaluated by various laboratory tests are comparable to each other fairly well when the effects of these factors are properly taken into account.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.57.1-60
• /
• 1999

This paper presents the effects of partial dampers on the lateral vibration of beams. Both shear and normal stresses in the viscoelastic layer were studied. Analytical results were compared with those obtained by a finite element method. Effects of the size of partial dampers on the system loss factors and resonant frequencies were discussed.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.76-84
• /
• 2006

Arrayed ultrasonic sensors based on the piezoelectric thin film (lead-zirconate-titanate: Pb($Zr_{0.52}Ti_{0.48})O_{3}$) having composite membrane structure are fabricated. Different thermal and elastic characteristics of each layer generate the residual stress during the high temperature deposition processes, accomplished diaphragm is consequently bowing. We present the membrane deflection effects originated from the residual stress on the resonant frequencies of the sensor chips. The resonant frequencies ($f_r$) measured of each sensor structures are located in the range of $87.6{\sim}111\;kHz$, these are larger $30{\sim}40\;kHz$ than the resultant frequencies of FEM. The primary factors of $f_r$ deviations from the ideal FEM results are the membrane deflections, and the influence of stiffness variations are not so large on that. Membrane deflections have the effect of total thickness increase which sensitively change the $f_r$ to the positive direction. Stress generations of the membrane are also numerically predicted for considering the effect of stiffness variations on the $f_r$.

• 한국전자파학회논문지
• /
• 제20권10호
• /
• pp.1091-1096
• /
• 2009

본 논문에서는 공진 MTM-TL(Metamaterial Transmission Line) 등가 회로를 이용하여 방사 및 회로 파라미터의 추출 식을 제시하였다. 특히 개방 또는 단락 상태에서 방사 소자인 직렬 $R_0$와 병렬 $G_0$를 EM 시뮬레이션 또는 측정을 통해 얻은 S-parameterd(|$S_{11}$|)를 이용하여 추출한다, EM 시뮬레이션의 결과, 추출한 파라미터를 이용한 회로 시뮬레이션의 결과 그리고 측정 결과가 매우 일치함을 확인하였다.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.757-765
• /
• 2018

This paper deals with the instability and resonant phenomena in distribution systems with multiple grid-connected inverters with an LCL output filter. The penetration of roof-top and other types of small photovoltaic (PV) grid-connected systems is rapidly increasing in distribution grids due to the attractive incentives set forth by different governments. When the number of such grid-connected inverters increases, their interaction with the distribution grid may cause undesirable effects such as instability and resonance. In this paper, a grid system with several grid-connected inverters is studied. Since proportional-resonant (PR) controllers are becoming more popular, it is assumed that most inverters use this type of controller. An LCL filter is also considered at the inverters output to make the case as realistic as possible. A complete modeling of this system is presented. Consequently, it is shown that such a system is prone to instability due to the interactions of the inverter controllers. A modification of PR controllers is presented where the output capacitor is virtually decreased. As a result, the instability is avoided. Simulation results are presented and show a good agreement with the theoretical studies. Experimental results obtained on a laboratory setup show the validity of the analysis.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.45-51
• /
• 2000

일반적으로 도막의 강성은 목재의 강성에 비해 낮으므로 도장된 소재의 강성이 백골재에 비해 낮아질 것으로 짐작할 수 있으므로 본 연구에서 는 바이올린용 소재 인 유럽산 가문비 나무와 단풍나무에 투명 래커와 전통옻칠을 도포한 후, 진동모드를 해석하고 공진주파수를 비교함으로써 수종별 도료 종류에 따른 음향특성의 변화양상을 분석하고자 하였다. 분석결과, 도장전후의 기본진동모드는 동일하였고 양 수종 공히 도료의 종류에 관계없이 도장재의 공진주파수의 감소가 확인되었으며 가문비나무의 경우, 모드가 증가할수록 주파수 감소폭이 증가하였으나 옻칠이 투명래커에 비해 그 감소폭이 적었다. 단풍나무의 경우에도 상위 모드에서 더 큰 주파수 감소를 나타냈지만 옻칠과 투명래커의 주파수 감소폭이 일정치 않았다.