• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.190-199
• /
• 1992

Ultrasonic Spectroscopy technique, covering a wide frequency range, is one of the powerful Nondestructive Evaluation method for detection of microdefects and thickness measurement of thin film below the linit of ultrasonic distance resolution in various types of masterials and composites, provides a useful information that connot be obtained by a conventional measuring system using a single frequency. Results of computer simulation of multiple reflection wave were applied for particular cases : measurements of thickness and Ultrasonic wave velocities propagating normal to the surface in Acryle thin films can be evaluted by using the interference phenomenon, even dimensions of interest are smaller than the ultrasonic wavelength. The repeatability of the thickness measurement in 0.28 mm thin film was 10$\^$-3/.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.22-23
• /
• 2011

As device dimensions shrink, it is increasingly important to develop fabrication methods that can create sub-15 nm features of regular or arbitrary geometry in a rapid, parallel, and efficient process. This talk will discuss approaches based on self-assembling hybrid polymers containing Si. The thin films of those materials systems can generate well-ordered periodic arrays of dots or lines. For achieving, long-range ordering, it is helpful to use lithographically-defined templates, which are in general much larger than the length-scale of self-assembled nanostructures. For example, the self-assembly of polymer nanostructures can easily be templated using an array of nanoscale topographical elements that act as guiding templates or surrogates for one of two microdomains. The solvent-vapor-induced tunability of pattern dimension and morphology will be discussed as well. Those material systems can excellently serve for high-precision self-assembly that can provide good resolution, reliability, and controllability and be considered as an option for a future nanomanufacturing technology.

• Journal of Sensor Science and Technology
• /
• v.15 no.6
• /
• pp.442-448
• /
• 2006

Ultrasonic anemometers using pulse envelope detection-based method are standard instruments in most meteorological studies. In this paper, a new phase measurement method is tried to achieve the enhanced resolution without changing dimensions. The measurement sensitivity, dynamic range, and measurement speed of the new instrument are 0.2 mm/s, 13.3 m/s, and 13 measurements/sec, respectively. A graphic user interface is added to show the velocity and direction of the wind with the speed of sound and temperature of the wind in the 3 dimensional space. The new anemometer could be useful for the measurement of the air speed, the flow of fluids, and even air flow inside the downtown buildings.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.237-241
• /
• 2001

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

• International Journal of Contents
• /
• v.5 no.3
• /
• pp.19-23
• /
• 2009

Laser scanning technology is a maturing measurement technology which is capable of obtaining 3D measurement data of objects with high-accuracy, high-resolution and in a short time. Laser scanners are used more and more as surveying instruments for various applications. This paper describes the procedure of 3D data acquirement using terrestrial LiDAR and section drawing extraction through a series of processing for remodeling the interior of a department building. Accurate drawings are needed for improvement construction of building interior. However if the design drawings of that time of construction work were lost or damaged or actual dimensions of drawings differ from those of design drawings, the interior should be resurveyed. In this study, the extraction process of interior plane figures were suggested through using laser scanning and related reverse engineering software

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.741-743
• /
• 2003

This study focuses on monitoring the surface UHI in a tropical city of Bangkok in both spatial and temporal dimensions based on MODIS- and TM -derived land surface temperature (LST). The spatial extension and magnitude of the surface UHI are explored for days and nights as well as its variations through the dry (least-clouded) season. Surface UHI growth between 1993 and 2002 is mapped using highresolution LANDSAT TM thermal bands. UHI patterns are, then, analyzed in association with land/vegetation covers derived from high-resolution ETM+ and ASTER satellites and ancillary data.

• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.62-65
• /
• 2000

A new type of multi-viewing zone screen for multiview 3-D display is described. The screen is made by stacking a Fresnel lens and a reflective prism array plate. The screen performs both focusing and beam dividing functions and directs very narrow light beams to three viewing zones for three spectators. The results of experimental testing of the screen have demonstrated that current technology of Fresnel lens and prism grooves on PMMA(Ploymethyl Methacrylate) allows manufacture of screen having a pixel size of about 1-2 mm. This size is reasonable enough for a screen with dimensions about 1m size. Optical qualities of Fresnel lenses and grooved prism arrays achieve an angular resolution for the screen of several angular minutes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.689-693
• /
• 2005

Inkjet printing is a non-contact and direct writing associated with a computer. In the industrial field, there have been many efforts to utilize the inkjet printing as a new way of manufacturing, especially for electronic devices. For the application of inkjet printing to electronic field, one of the key factors is exact realization of designed images into printed patterns. In this work, micro patterning for conducting line has been studied using the piezoelectric print head and silver nano ink. Dimensions of printed images have been predicted in terms of print resolution and diameter of a single dot. The predicted and the measured values showed consistent results. Using the results, the design capability for industrial inkjet printing could be achieved.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.31-37
• /
• 2013

This paper proposes a vision-based inspection algorithm for a punch which is used when forming the head of the small screws. To maintain good quality of punch, the precise inspection of its dimension and the depth of the punch head is important. A CCD camera and an illumination dome light are used to measure its dimensions. And a structured line laser is also used to measure the depth of the punch head. Resolution and visible area depend on setup between laser and camera which is determined using CAD-based simulation. The proposed method is successfully evaluated using experiment on #2 punch.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.183-187
• /
• 2005

Thin films of diblock copolymers may be suitable for semiconductor device applications since they enable patterning of ordered domains with dimensions below photolithographic resolution over wafer-scale area. We obtained nanometer-scale cylindrical structure of dibock copolymer of polystyrene-block-poly(methylmethacrylate), PS-b-PMMA, also demonstrate pattern transfer of the nanoporous polymer using both reactive ion etching. The size of fabricated naonoholes were about 10 nm. Fabricated nanopattern surface was observed by field emission scanning electron microscope (FESEM).