• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.641-646
• /
• 2023

In this paper, TM(transverse magnetic) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the FGMM(fourier galerkin moment method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. Overall, as the uniform resistivity of the resistive strip increased, the size of the current density induced in the resistance band decreased, the reflected power decreased, and the transmitted power increased. In addition, As the thickness of the dielectric layer increased, the reflected power increased and the transmitted power relatively decreased. The numerical results of the structure proposed in this paper are shown in good agreement compared to the results of PMM, a numerical analysis method of the existing paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1183-1189
• /
• 2014

The accuracy of the resistive-sheet technique in calculating the RCS(Radar Cross Section) of a deciduous leaf is examined in this paper for various thicknesses and dielectric constants, and a range of thicknesses for the resistive sheet technique is proposed. At first, a leaf was assumed to be a lossy dielectric disk, and the dielectric disk was again assumed to be a resistive sheet with an appropriate resistivity for a given thickness, a dielectric constant, and a frequency. Then, the RCS of the leaf was computed using the physical optics(PO) method, and was compared with the calculation results of a numerical analysis: i.e., a commercial tool based on the FEM (Finite Element Method) technique. It was shown that the error increases as the thickness increases. The error was 0.1 dB, for example, when the thickness is 1.2 mm and 3.7 dB when the thickness is 3 mm with a dielectric constant of(21.4, 9.7) at 9.6 GHz. It was also found that the error decreases as the dielectric constant increases. This study will be very useful for calculating the scattering characteristics of numerous leaves in a vegetation canopy for estimating its radar backscatter using scattering model.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.167-171
• /
• 2008

A bridge resistance deviation-to-frequency (BRD-to-F) converter is presented for interfacing resistive sensor bridges. It consists of a linear operational transconductance amplifier (LOTA), a current-controlled oscillator (CCO). The prototype converter was simulated using commercially available discrete components. The result shows that the converter has a conversion sensitivity amounting to 16.90 kHz/${\Omega}$ and a linearity error less than ${\pm}$0.03 %.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.3
• /
• pp.267-275
• /
• 2011

Objective : This study aims to examine how lumbar stabilization exercise and resistive exercise affect lumbar and lower extremity muscular strength of the aged. Method : Randomly selected 15 female senior citizens aged 65 or older at S, Y, and J senior citizens' center located in D city who meet the requirements for the study were divided into a resistive exercise group of 7 and a stabilization exercise group of 8 for which 60-minute-exercise sessions were administered three times a week for 12 weeks. Measuring lumbar and lower extremity muscular strength was measured six weeks and 12 weeks after exercise, respectively. Results : First, both resistive exercises and stabilization exercises are effective to improve lumbar muscular strength. Second, resistive exercise is effective to improve flexural muscle strength as well as lower extremity muscular strength, and stabilization exercise is effective for both flexion and extensor muscle strength. Conclusion : The 12 week lumbar stabilization exercise program appeared to be effective to improve lumbar and lower extremity muscular strength of the aged. This indicates that applying this program to identify and prevent frequent risk factors of falling can lead to the prevention of secondary problem factors of falling accidents.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.143-149
• /
• 2004

This paper describes characteristics of the single-balanced low IF resistive FET mixer for the digital beam forming(DBF) receiver. This DBF receiver based on the direct conversion method is designed with Low IF I and Q channel. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 1950 MHz, 1940 MHz and 10 MHz, respectively. Super low noise HJ FET of NE3210S01 is considered in design. The measured results of the proposed mixer are observed IF output power of -22.8 dBm without spurious signal at 10 MHz, conversion loss of -12.8 dB, isolation characteristics of -20 dB below, 1 dB gain compression point(PldB) of -3.9 dBm, input third order intercept point(IIP3) of 20 dBm, output third order intercept point(OIP3) of 4 dBm and dynamic range of 30 dBm. The proposed mixer has 1.0 dB higher IIP3 than previously published single-balanced resistive and GaAs FET mixers, and has 3.0 dB higher IIP3 and 4.3 dB higher PldB than CMOS mixers. This mixer was fabricated on 0.7874 mm thick microstrip $substrate(\varepsilon_r=2.5)$ and the total size is $123.1\;mm\times107.6\;mm$.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.34-39
• /
• 2014

This paper is aimed to prevent danger of electrical fire at cattle barn to detect resistive and capacitive leakage current component for wiring type and length. In order to analysis for electric leakage component for cattle barn sizes and normal buildings, this paper was studied field state investigation which are at cattle barn companies(10 companies) in Cheong-won location and normal buildings at Nam-bu market in Jeon-ju location. Market to deduce the problems of electric leakage component is analyzed. The resistive and capacitive leakage current component for wiring type and length is analyzed at Beon-young cattle barn. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in cattle barn. It is acceptable for electrical equipment use in an cattle barn.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.81-89
• /
• 2009

Recently, Guard lamp was divided from electric facilities for general use as dangerous zone of safety management. This paper presents a remote inspection system of guard lamp that can monitor electrical safety factor. Especially, the developed system adopts the measurement algorithm for detecting resistive leakage current($I_{gr}$) flowing based on the phase difference checkable for sensing at a monitor. Also, It was fabricated the repeater for data transmission and the MMI program At this system, we made experiment on stability of resistive leakage current to verify phase comparison detecting algorism.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1369-1372
• /
• 1999

We investigated the current limiting characteristics of resistive and inductive SFCLs with 100${\Omega}$ of Quench impedance for a double line-to-ground fault, in the 154 kV transmission system. The fault simulation at the phase angles $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ showed that the resistive SFCL limited the fault current less than 17 kA without any DC component after one half cycle from the instant of the fault. On the other hand, the inductive SFCL suppressed the current below 12 kA, but with 3$\sim$5 kA of DC component which decreased to zero in 6 cycles. We concluded that the inductive SFCL had higher performance in current limiting but the resistive SFCL was better from the view point of DC components.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.305-308
• /
• 2002

An 1.8V 6bit IGSPS ADC for high speed data acquisition is discussed in this paper. This ADC is based on a flash ADC architecture because the flash ADC is the only practical architecture at conversion rates of IGSPS and beyond. A straightforward 6bit full flash A/D converter consists of two resistive ladders with 63 laps, 63 comparators and digital blocks. One important source of errors in flash A/D converter is caused by the capacitive feedthrough of the high frequency input signal to the resistive reference-lauder. Consequently. the voltage at each tap of the ladder network can change its nominal DC value. This means large transistors have a large parasitic capacitance. Therefore, a dual resistive ladder with capacitor is employed to fix the DC value. Each resistive ladder generates 32 clean reference voltages which alternates with each other. And a two-stage amplifier is also used to reduce the effect of the capacitive feedthrough by minimizing the size of MOS connected to reference voltage. The proposed ADC is based on 0.18${\mu}{\textrm}{m}$ 1-poly 6-metal n-well CMOS technology, and it consumes 307㎽ at 1.8V power supply.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1186-1190
• /
• 2003

In this paper, a valveless bubble-actuated fluid micropump was has been developed and its performance was tested. The valveless micropump consists of the lower plate, the middle plate, the upper plate and a resistive heater. The lower plate includes the nozzle-diffuser elements and the double-chamber. Nozzle-diffuser elements and a double-chamber are fabricated on the silicon wafer by the DRIE(Deep Reactive Ion Etching) process. The lower plate also has inlet/outlet channels for fluid flow. The middle plate is made of glass and plays the role of the diaphragm. The chamber in the upper plate is filled with deionized water, and which contacts with the resistive heater. The resistive heater is patterned on a silicon substrate by Ti/Pt sputtering. Three plates and the resister heater are laminated by the aligner and bonded in the anodic bonder. Since the bubble is evaporated and condensed periodically in the chamber, the fluid flows from inlet to outlet with respect to the diffusion effect. In order to avoid backflow, the double chamber system is introduced. Analytical and experimental results show the validity of the developed double-chamber micropump.