• The Plant Pathology Journal
• /
• v.38 no.4
• /
• pp.366-371
• /
• 2022

The white soybean cyst nematode Heterodera sojae, isolated from the roots of soybean in Korea, is widespread in most provinces of the country and has the potential to be as harmful to soybean as H. glycines. Determining the virulence phenotypes of H. sojae is essential to devising management strategies that use resistant cultivars. Consequently, virulence phenotypes of 15 H. sojae populations from Korea were determined on seven soybean lines and one susceptible check variety. Two different HS types were found to be present in Korea; the more common HS type 2.5.7, comprising 73.3% of the H. sojae populations and the less common HS type 0, constituting only 26.7% of the tested populations. Considering the high frequency of H. sojae adaptation to soybean indicator lines, the PI 88788 group may not be a possible source of resistance while PI 548402, PI 90763, PI 437654, and PI 89772 can be used as resistance sources for soybean breeding programs aimed at developing H. sojae-resistant soybean cultivars in Korea.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.3
• /
• pp.169-176
• /
• 2023

The emergence and spread of antibiotic-resistant bacteria have been increasing with anthropogenic contamination. Understanding the prevalence and distribution of these resistant bacteria in environments is crucial for effectively managing anthropogenic pollutants. Lake Gyeongpo in the Gangwon Province of South Korea is known for its diverse ecological features and human interactions. The lake is exposed to pollutants from nonpoint sources, including urban areas, agricultural practices, and recreational activities, which can introduce antibiotics and foster antibiotic resistance in bacteria. The present study investigates Lake Gyeongpo as a potential reservoir for antibiotic-resistant bacteria in a natural ecosystem. A total of 203 bacterial isolates were collected from six sampling locations in Lake Gyeongpo during May, July, and November 2022. Most isolates were taxonomically identified as Pseudoalteromonas, Bacillus, Shewanella, and Vibrio spp.; their abundance showed a spatiotemporal distribution. An antibiotic susceptibility test was conducted on 75 isolates using the disk diffusion method with six drugs according to the CLSI guideline; 42 isolates were resistant to one or more antibiotics. Among these, 15 isolates were identified as multidrug resistant bacteria. This finding suggests the potential anthropogenic impact on Lake Gyeongpo and provides valuable insights into the dissemination of antibiotic resistance caused by anthropogenic pollutants.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.80.1-80
• /
• 2003

Several plant and microbial genes that could confer disease resistance in transgenic rice plants are being cloned and characterized. We are currently constructing transgenic rice lines that overexpress the gene products, such as a galactinol synthase, a defensin, and a bacterial ACC deaminase. Subtractive hybridization of a rice cDNA library constructed from the Xanthomonas oryzae-infected ice leaves resulted in isolation of many inducible cDNA clones including a elongation factor EF2, a oryzain alpha, a catalase, a aldehyde dehydrogenase, a S-adenosylmethionine synthetase, a caffeic acid O-methyltransferase, a glyceraldehyde-3-phosphate dehydrogenase, a light-regulated protein, nKY transcription factors, and a nucleotide diphosphate kinase. Some genes among those may be useful genetic sources for construction of disease resistant transgenic rice. Full lengths of the rice OsFIERG and a rice oryzain genomic clones were cloned, and serial deletion fragments of the promoter regions of these genes were fused with GUS reporter gene in pCAMBIA1201, respectively. Promoter activities of these constructs will be examined upon various stresses and Pathogen infections to obtain the pathogen specific inducible-promoter. This work was supported by a grant from BioGreen 21 Program, Rural Development Administration, Republic of Korea.

• Tribology and Lubricants
• /
• v.40 no.3
• /
• pp.78-83
• /
• 2024

The development of eco-friendly alternative energy sources has become a global priority owing to the depletion of fossil fuels and an increase in environmental concerns. Hydrogen energy has emerged as a promising clean energy source, and hydrogen compressors play a crucial role in the storage and distribution of compressed hydrogen. However, harsh operating conditions lead to the rapid deterioration of conventional lubricants in hydrogen compressors, thereby necessitating the development of advanced lubrication technologies. This study introduces micrometer-sized silicone rubber powders as lubricant additives to enhance the lubrication performance of hydraulic oils in hydrogen compressors. We prepare silicone rubber powders by varying the ratio of the silicone rubber base to the curing agent and investigate their effects on interfacial properties, friction behavior, and wear characteristics. The findings reveal that the incorporation of silicone rubber powders positively influences the surface affinity, wettability, friction reduction, and wear resistance of the lubricants on the 304SS substrate. Moreover, we identify the optimal lubricant formulations, with a 15:1 ratio demonstrating the most effective friction reduction and a 5:1 ratio exhibiting the highest wear resistance. The controlled surface modification by the silicone rubber powder and the enhanced interfacial characteristics of the powder-containing lubricants synergistically contribute to the improved lubrication performance. These results indicate the potential of silicone rubber powder additives for the development of long-life lubrication solutions for hydrogen compressors and related applications, ultimately contributing to the advancement of sustainable energy technologies.

• Korean Journal of Microbiology
• /
• v.40 no.1
• /
• pp.37-42
• /
• 2004

To differentiate commercial bifidobacteia for Bifidobacterium lactis Bb-12, Bif. longum Bb-536 and Bif. infantis Maeil-K9, we studied the various carbon source, the nitrogen sources and antibiotics. Amygdalin and fructose were good candidates for carbon sources, and tryptone was suitable for nitrogen sources to design a new selective media for three commercial bifidobacteria. In the case of the amygdalin-containing medium as carbon sources, Bif. lactis Bb-12 and Bif. infantis Maeil-K9 showed good growth, and in fructose-containing medium, Bif. longum Bb-536 showed good growth. In antibiotics resistance study, the addition of 1 mg/L doxycyclin was very effective for differentiation of each bifidobacteria. Doxycyclin did not affect the growth of Bif. lactis Bb-12 and Bif. infantis Maeil-K9, but Bif. longum Bb-536 was completely inhibited by doxycyclin. Finally to confirm the selection capability of newly designed selective media, temperature-shocked bifidobacteria were cultured on them. As the results, fructose or doxycyclin containing medium showed for high growth for temperature-shocked bifidobacteria, but amygdalin containing medium showed low growth of temperature-shocked bifidobacteria.

• The Korean Journal of Mycology
• /
• v.23 no.3 s.74
• /
• pp.246-256
• /
• 1995

Phenotypic characteristics, pathogenicity and fungicides resistance of fifty one isolates of Botrytis cinerea obtained from various host plants were observed and determined. The relationships between these characteristics were also investigated on the basis of isolation host plants. The isolates of B. cinerea varied in the capacity of sclerotia formation and sporulation. The pathogenicity of 44 isolates from tomato, cucumber, and strawberry was significantly stronger with 3.2 cm in average diameter of necrotic lesions on cucumber leaves than that of seven isolates from other host plants such as orange, gerbera, ginseng, kiwi, grape, pear and from butter with 1.8 cm in average diameter of necrotic lesions. Benomyl resistance of 12 isolates from tomato plants was much higher with the $EC_{50}$, 562 ppm than that of 19 isolates from various host plants. Diethofencarb resistance, however, of 11 isolates from strawberry plants was highest with the $EC_{50}$, 210 ppm among isolates from other host plants. Polygalacturonase activity varied among isolates in the range of 0 to 103 unit and that of isolates from tomato, cucumber and strawberry was slightly lower than that of isolates from other host plants. No significant relationship between pathogenicity and fungicides resistance, polygalacturonase activity was found among 51 isolates of B. cinerea. Isozyme patterns of polygalacturonase produced from two strongly and weakly pathogenic isolates (FC122, KC6) were slightly different depending upon carbon sources during cultivation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1083-1090
• /
• 2012

Copper alloys are widely used for casting materials including ship's propellers and pump impellers as they provide high corrosion resistance. In addition, the demand for these alloys is increasing with rapid growth of offshore structures and exploitation of various substitute energy sources. However, they require regular maintenance because of erosion and cavitation damages induced by exposure to marine environment at high speed flows for a long period of time. Water cavitation peening have received attention as one of surface modifications for durability improvement of the copper alloys. This is a environment friendly technology without influence of heat and easily applicable to casting materials. In this research, water cavitation peening was employed in distilled water for copper alloy castings as a function of time and evaluation of corrosion resistance was followed in seawater for the modified surface by using electrochemical methods. The result suggests that the water cavitation peening for 2 minutes was found to be the optimal peening parameter in terms of durability and corrosion resistance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1095-1104
• /
• 2014

This paper presents the results of experimental work on both strength characteristics and durability of concrete or mortar having 50% ground granulate blastfurnace slag(GBS) with different fineness levels (4,450, 6,000 and $8,000cm^2/g$). Compressive and split tensile strength test results indicated that the concrete with a higher fineness level of GBS exhibited a better strength development due to the acceleration of latent hydraulic property at the later curing stage compared with ordinary portland cement concrete. Meanwhile, it was found that a higher fineness level of GBS showed some negative effects on the resistance against freezing-thawing action. However, incorporation of GBS to concrete, irrespective of fineness levels, significantly enhanced the chloride ions penetration resistance. The resistance against sulfate attack of mortar with GBS was greatly dependent on the attacking sources from sulfate environments.

• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.5
• /
• pp.309-317
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we investigated the strength of fire resistance steel for frame structure by tensile test after degradation treatment and analysed acoustic emission signals obtained from tensile test with time frequency analysis methods. In the T and TN specimens(under $600^{\circ}C$-10min ) consisting of ferrite and pearlite structure, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$-10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point and the second after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min, many signals were observed before yield point and were decreased after yield point.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1077-1082
• /
• 2013

To improve cycling performance, the power output of the rider and the sources of resistance (e.g., air resistance, frame stiffness, and cycle mass) must be considered. From a mechanical viewpoint, we consider how the bike frame performance can be increased while decreasing the resistance. First, to improve the competitive ability of a racing track cycle, we should consider the stiffness of the bike frame including the pedal loading and aerodynamic effects when riding. Therefore, we obtained the cross-sectional area of each part of the bike frame and then aimed to minimize the drag force through an aerodynamic parametric study. In addition, the frame should remain safe under the loading applied by the rider. Under the guidelines of the UCI (union Cycliste Internationale) regulations, the bike frame has been evaluated under the proposed loading condition, and we developed a racing track cycle for elite cyclists.