• Korean journal of applied entomology
• /
• v.31 no.3
• /
• pp.205-240
• /
• 1992

In reality, it is a green revolution of the entire agricultural matrix in Korea that integrated pest control plays an important role in the possible breakthrough in rice self-sufficiency. In paddy agroecosystem as man-modified environment, rice is newly established every year by transplantation under diverse water regimes which affect a microclimate. Standing water benefits rice by regulating the microclimate, but it favors the multiplication of certain pets through the amelioration of the microclimate. Further, the introduction of high yielding varieties with the changing of cultural practices results in changing occurrence pattern of certain pests. In general, japonica type varieties lack genes resistant to most of the important pests and insect-borne virus diseases, whereas indica type possesses more genes conferring varietal resistance. Thus, this differences among indica type, form the background of different approaches to pest management. The changes in rice cultivation such as double cropping, growing high-yielding varieties requiring heavy fertilization, earlier transplanting, intensvie-spacing transplanting, and intensive pesticide use as a consequence of the adoption of improves rice production technology, have intensified the pest problems rather than reduced them. The cultivation of resistant varieties are highly effective to the pest, their long term stability is threathened because of the development of new biotypes which can detroy these varieties. So far, three biotypes of N. lugens are reported in Korea. Since each resistant variety is expected to maintain several years the sequential release of another new variety with a different gene at intervals is practised as a gene rotation program. Another approach, breeding multilines that have more than two genes for resistance in a variety are successfully demonstrated. The average annual rice losses during the last 15 years of 1977-’91 are 9.3% due to insect pests without chemical control undertaken, wehreas there is a average 2.4% despite farmers’insecticide application at the same period. In other words, the average annual losses are prvented by 6.9% when chemical control is properly employed. However, the continuous use of a same group of insecticides is followed by the development of pest resistance. Resistant development of C. suppressalis, L. striatellus and N. cincticeps is observed to organophosphorous insecticides by the mid-1960s, and to carbamates by the early 1970s in various parts of the country. Thus, it is apparent that a scheduled chemical control for rice production systems becomes uneconomical and that a reduction in energy input without impairing the rice yield, is necessarily improved through the implementation of integrated pest management systems. Nationwide pest forecasting system conducted by the government organization is a unique network of investigation for purpose of making pest control timely in terms of economic thresholds. A wise plant protection is expected to establish pest management systems in appropriate integration of resistant varieties, biological agents, cultural practices and other measures in harmony with minimizing use of chemical applications as a last weapon relying on economic thresholds.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.167-183
• /
• 2016

This study has recognized easy payment service as one of the new types of application of information and communication technologies and proposed a modified acceptance intention model by adding perceived risk factor based on the unified theory of acceptance and use of technology(UTAUT) and then explored those variables that effect the acceptance intention of consumers. The results of this study can be summarized as the followings. First, expectation on the efforts, social impact have positive effect on the acceptance intention and perceived risk has negative effect on the acceptance intention but expectation on the efforts and promotion condition were found to have no effect on the acceptance intention. Second, among the factors suggested, social impact was found to have more effect of causing the acceptance intention of users than expectation on the efforts and perceived risk. Third, it was found that there is a significant association between the acceptance intention and use behavior of users of easy payment service. This means that, as was reviewed in the preceding researches, the acceptance intention affects actual acceptance behavior of users either directly or indirectly. Fourth, even though innovation resistance has regulation effect on the relationship between expectation on efforts or social impact and acceptance intention, it was found to have no regulation effect on the relationship between perceived risk and acceptance intention.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.376-380
• /
• 2017

In this paper, we prepared a metal alloy resistor with stable thermal electro motive force (thermal EMF) as well as a low temperature coefficient of resistance (TCR) by adjusting the manganese proportion from 3 to 12 wt% in the Cu-Mn-Ni alloy. Composition of the fabricated metal alloy was investigated using energy dispersive X-ray (EDX) analysis. The TCR of each sample was measured as 44.56, 40.54, 35.60, and 31.56 ppm for Cu-3Mn-2Ni, Cu-5Mn-2Ni, Cu-10Mn-2Ni, and Cu-12Mn-2Ni, respectively. All the resistor samples were available for the F grade (${\pm}1%$ of the allowable error of resistance) high-precision resistor. All the samples satisfied the baseline of high thermal EMF (under 3 mV at $60^{\circ}C$); however, Cu-3Mn-2Ni and Cu-5Mn-2Ni satisfied the baseline of low thermal EMF (under 0.3 mV at $25^{\circ}C$). We were thus able to design and fabricate the metal alloy resistor of Cu-3Mn-2Ni and Cu-5Mn-2Ni to have low TCR and stable thermal EMF at the same time.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.6
• /
• pp.554-559
• /
• 2015

Single cell of PEMFC (polymer electrolyte membrane fuel cell) is composed of bipolar plates, gasket, GDL and the MEA. Bipolar plate's function is the collecting electricity, helping oxygen/hydrogen gas diffuse evenly and draining the water and heat. In this work, we have conducted experiments to low contact resistance and improve the performance of a $25cm^2$ single cell by using metal forms. We have following experimental cases: 1) Conventional graphite serpentine channel bipolar plate; 2) Channel-less bipolar plate with nickel(Ni) based metal foam which coated by various materials. We focused the difference in contact resistance and performance of the single cell with metal foam depending on various coating materials. The experimental results show the similar performance of single cells between with serpentine channel bipolar plates and with channel-less bipolar plate using metal foams. In addition, single cell with metal foam shows potential to higher performance than conventional channel.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1551-1556
• /
• 2016

Broiler meat production worldwide has been plagued by lethal food-poisoning bacteria diseases, including listeriosis. A fatality rate of 15.6% was recorded in human beings in the EU in 2015. During 2013, a total of 200 poultry farm samples, including litter, chicken breast, farm feed, and drinking water, were collected to generate baseline data for the characterization of the genus Listeria in broiler poultry farms. Listeria spp. were detected in a total of 95 (47.5%) poultry farm samples. The isolates of Listeria spp. included L. innocua (28.5%), L. ivanovii (12.5%), L. welshimeri (4.5%), and L. monocytogenes and L. seeligeri (1% each). Listeria spp. contamination rates were higher in farm feed (70%), followed by litter (52.5%), chicken breasts (42.2%), and drinking water (10%). Almost all Listeria spp. isolates were resistant to more than three classes of antibiotics (multidrug resistant). Besides this, we observed a significant resistance level to penicillin and fluoroquinolone drugs. However, lower resistance levels were recorded for broad-spectrum cephalosporins. The inlA, inlC, and inlJ virulence genes were detected in almost all of the L. monocytogenes isolates. Thus, food safety management approaches and interventions at all stages of the broiler rearing cycle were needed to control cross-contamination and the zoonotic potential of listeriosis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.195-207
• /
• 2012

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used trawl as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.05a
• /
• pp.1-4
• /
• 1998

Impaired insulin action in Type 2 diabetes is thought to lead to hyperglycemia, with both environmental and complex genetic factors playing key roles. Although the primary lesion in Type 2 diabetes is unknown, a number of studies suggest that metabolic defects in the liver, skeletal muscle and fat, and pancreatic ${\beta}$-cells contribute to the disease. These metabolic abnormalities are characterized by the overproduction of hepatic glucose, impaired insulin secretion, and peripheral insulin resistance. In current pharmacological treatment of Type 2 diabetes, sulfonylurea (SU) drugs have mainly been used as oral hypoglycemic drugs to stimulate endogenous insulin secretion from ${\beta}$ cells. SU drugs, however, sometimes aggravate the disease by causing fatigue of the pancreatic ${\beta}$ cells, which leads to reduced drug efficacy after long-term treatment. This class of drugs also leads to enhanced obesity arising from the stimulation of endogenous insulin secretion in obese Type 2 diabetic patients, plus an increased incidence of SU-induced hypoglycemia. Since 1980, a major challenge has been made by us to develop a potential pharmacological therapy for the treatment of insulin resistance in peripheral tissues and/or suppression of abnormal hepatic glucose production in Type 2 diabetic patients. Such a drug would be expected to have fewer side effects and retain long-term efficacy.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2005.10a
• /
• pp.15-20
• /
• 2005

Locations of silicon accumulation in rice leaves and its possible association with resistance to rice blast were investigated by analytical electron microscopy and atomic force microscopy. A blast-susceptible cultivar, Jinmi, and partially resistant cultivars, Hwaseong and Suwon345, were grown under a hydroponic culture system with modified Yoshida's nutrient solution. Electron-dense silicon layers were frequently found beneath the cuticle in epidermal cell walls of silicon-treated plants. Increasing levels of silicon were detected in the outer regions of epidermal cell walls. Silicon was present mainly in epidermal cell walls, middle lamella, and Intercellular spaces within subepidermal tissues. Furthermore, silicon was prevalent throughout the leaf surface with relatively small deposition on stomatal guard cells in silicon-treated plants. Force-distance curve measurements revealed relative hardness and smaller adhesion force in silicon-treated plants (18.65 uN) than control plants (28.39 uN). Moreover, force modulation microscopy showed higher mean height values of elastic Images In silicon-treated plants(1.26 V) than in control plants (0.44 V), implying the increased leaf hardness by silicon treatment. These results strongly suggest that silicon-induced cell wall fortification of rice leaves may be closely associated with enhanced host resistance to blast.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5691-5695
• /
• 2015

Background: Continuous surveillance of pattern of blood stream infection is necessary in febrile neutropenia (FN)especially with the recent escalating trend in the management of pediatric cancer patients towards intensified regimens and with the increase in infections caused by resistant organisms limiting the choice of antibiotics. Aim: To monitor change in pattern of blood stream infections (BSI) in FN pediatric cancer patients. Materials and Methods: Surveillance of FN episodes with positive BSI was prospectively monitored and compared to a previous surveillance in the same pediatric oncology unit. Results: A total of 232 BSI positive episodes were documented in 192 patients during a 6 months period. The results of recent surveillance analysis showed an increase in intensified regimens of chemotherapy, antimicrobial resistance, fungal infections, and prolonged duration of episodes when compared to previous surveillance, with p value sof <0.001, 0.005, 0.021, and <0.001, respectively. There was an apparent decrease in the crude mortality but this was not statistically significant, to 6% in 2011 from 10 % in 2006. Conclusions: The pattern of BSI at our institution is still inclining towards gram positive organisms but is showing a shift towards more antibiotic resistance and fungal infections.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.166-171
• /
• 2016

Electric vehicle ownership is expanding for two reasons: its technology features have enhanced fuel economy, and the number of vehicle emissions regulations is increasing. Battery performance has a large influence on the capability of electric vehicles, and even though battery thermal management has been actively researched, specific technological improvements to battery performance are not being presented. For instance, many industrial applications utilize vortex tubes as components for refrigeration machines because of their numerous intrinsic benefits. If electric vehicles incorporate vortex tubes for battery cooling, performance and efficiency advancements are possible. This study uses a counter-flow vortex tube to investigate its temperature separation characteristics, based on the back pressure of the cold air exit and the difference between the inlet and back pressures. The experiment uses a vortex tube with the following parameters: six nozzle holes, a 20 mm inner vortex diameter (D), a 14D tube length, a 0.7D cold exit orifice diameter, and a nozzle area ratio of 0.142. The measurements prove that the temperature difference between the hot air and cold air decreased because of the flow resistance of the hot air and the backflow phenomenon at the cold air exit. The flow resistance causes the temperature difference to decrease, and the back pressure of the cold air exit influences the flow resistance. The results show that the back pressure significantly influences the efficiency of temperature separation.