• 제목/요약/키워드: resistance induction

검색결과 627건 처리시간 0.025초

Study on an Adaptive Maximum Torque Per Amp Control Strategy for Induction Motor Drives

  • Kwon, Chun-Ki
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권1호
    • /
    • pp.110-117
    • /
    • 2013
  • Maximum Torque Per Amp (MTPA) control for induction motor drives seeks to achieve a desired torque with the minimum possible stator current. This is favorable in terms of inverter operation and nearly optimal in terms of motor efficiency. However, rotor resistance variation can cause significant performance degradation. This work demonstrates that existing MTPA controls perform sub-optimally as temperature varies. An adaptive MTPA control strategy is proposed that always achieves optimal performance without exhibiting hunting phenomenon regardless of rotor temperature. The proposed control is experimentally shown to accurately achieve the desired torque.

회전자 저항 변동에 강인한 유도전동기 2-자유도 제어기 설계 (Design of Robust TDOF Controller of Induction Motor for Variation of Rotor Resistance)

  • 양이우;김상욱;김영석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.357-359
    • /
    • 1994
  • This paper consists of the vector control of three phase induction motors which has robustness against disturbances and parameter variations by the TDOF (Two Degree Of Freedom) theory. Using the TDOF theory, induction motor is robustly controlled for resistance variations and disturbances. Adaptive observer is used for the purpose of estimating the stator fluxes, the stator currents, and the parameters. The proposed control netted is verified by computer simulations.

  • PDF

유도전동기의 고성능제어를 위한 속도센서리스 벡터제어 (Speed Sensorless Vector Control for High Performance of Induction Motor)

  • Dong Hwa Chung
    • 전자공학회논문지B
    • /
    • 제30B권11호
    • /
    • pp.37-46
    • /
    • 1993
  • Recently, the elimination of speed sensors has been one of the important requirement in vector control systems, because the speed sensor spoil the ruggedness and simplicity of induction motor. This paper proposes sensorless vector control for high performance of induction motor. The proposed vector control scheme is based on a rotor flux and speed which are calculated from the stator voltage and currents with improved flux estimator. The characteristics of vector control employing stator voltage and current generally deteriorate as the speed gets lower acause the calculated rotor flux depends on the stator resistance and it is difficult to calculate rotor flux at low speed of standstill. This new control system is robust with respect to variations of the stator resistance and it makes possible to calculated rotor flux at low speed of standstill. These feature are verified by the simulation results.

  • PDF

약계자영역에서 유도전동기 고정자자속기준제어의 파라미터 비동조 영향 분석 (Analysis on Parameter Detuning of Induction Motor Drives in Field Weakening Region)

  • 신명호
    • 조명전기설비학회논문지
    • /
    • 제24권9호
    • /
    • pp.118-123
    • /
    • 2010
  • The selection of flux level in the maximum torque control of stator flux-oriented induction motor drives in the field weakening region is dependent on stator resistance and inductances. This paper presents parameter detuning effects of stator flux-oriented control drives in the field weakening region. The detuning effects of stator resistance and rotor leakage inductance are analyzed. The decrease of torque and the flux control lost by the detuning of inductance are shown in the simulation results.

계단 응답을 이용환 유도 전동기 파라미터 식별 (Induction Motor Parameter Identification using Step Response)

  • 전범호;노치원;류준형;이광원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 B
    • /
    • pp.723-725
    • /
    • 2000
  • This paper presents a parameter identification method to estimate the stator resistance. stator inductance, rotor resistance and rotor inductance of the induction motor. A step voltage is applied across the stator terminals while the machine is in the standstill condition, and the resulting stator voltage and current response are measured. Observer/Kalman Filter Identification(OKID) algorithm is used to estimate induction motor parameters. Simulation results are presented to verify the identified model.

  • PDF

The role of defense-related genes and oxidative burst in the establishment of systemic acquired resistance to Xanthomonas campestris pv. vesicatoria in Capsicum annuum(oral)

  • Lee, S.C.;B.K. Hwang
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
    • /
    • pp.64.1-64
    • /
    • 2003
  • Inoculation of primary pepper leaves with an avirulent strain of Xanthomonas campestris pv. vesicatoria induced systemic acquired resistance (SAR) in secondary leaves. This SAR response was accompanied by the systemic expression of defense-related genes, a systemic microoxidative burst generating H2O2, and the systemic induction of ion-leakage and callose deposition in the non-inoculated, secondary leaves. Some defense-related genes encoding PR-1, chitinase, peroxidase, PR10, thionin, defensin and zinc-finger protein were distiilctly induced in the systemic leaves. The systemically striking accumulation of H$_2$O$_2$and strong increase in peroxidase activity in pepper was suggested to contribute to the triggering of cell death In the systemic micro-HRs, leading to the induction of SAR. Treatment of non-inoculated, secondary leaves with diphenylene iodinium (DPI), an inhibitor of the oxidative burst, substantially reduced the induction of some defense-related genes and subsequently SAR.

  • PDF

고온초전도 벌크 베어링을 사용한 유도 전동기의 특성 시험 (Performance Tests of an Induction Motor with Hexahedron HTS Bulk Bearing)

  • 임형우;이광윤;박명진;차귀수;이지광
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권6호
    • /
    • pp.286-290
    • /
    • 2003
  • The high temperature superconducting bulk can be used as the bearing of induction motors. This paper presents the fabrication and test results of an induction motor with superconducting bearings using HTS bulks. The bearing had eight hexahedron type YBCO bulks. Height, width and thickness of the HTS bulk were 30mm, 30mm and 10mm, respectively. Single phase induction motor was used to drive the shaft made of aluminum and the rotor of a conventional induction motor. To estimate the performance of the HTS bulk magnetic bearing, no load test, load test and Impact test were carried out. Load tests were performed by using air resistance caused by the shaft-mounted thin cylinder with buckets. Impact tests by axial direction and vertical direction impact showed that the vibration of the shaft gradually decayed. The induction motor with HTS bulk magnetic bearing rotated silently and smoothly throughout the tests. According to the test results, conventional bearings can be replaced with superconducting magnetic bearings made of HTS bulks.

엘리베이터를 위한 유도전동기의 에너지절감 및 고성능제어 (Control of Elevator Induction Motors with High Dynamic Performance and High Power Efficiency)

  • 김규식;김재윤;최주엽;송중호
    • 전력전자학회논문지
    • /
    • 제4권1호
    • /
    • pp.43-49
    • /
    • 1999
  • 본 연구에서는 비선형 시스템을 선형 시스템으로 변환시키는 미분기하이론에 기초를 둔 비선형 궤환 선형화 기법을 유도전동기와 같은 비선형 시스템의 제어에 응용함으로써 완전한 비간섭 시스템을 얻을수 있음을 보였다. 또한, 엘리베이터와 같은 부하의 정속도 운전시 효율제어를 위해 회전자 자속을 변화시킬 때 이의 영향을 받아 값이 바뀌는 인덕턴스와 온도에 따라 가장 변화가 심한 회전자저항을 위한 추정알고리즘을 제안하고 이의 성능을 평가해 보기 위하여 시뮬레이션과 실험을 수행하였다.

속도 Observer를 이용한 유도전동기 센서리스 벡터제어의 과도특성 (Transient Characteristics of Sensorless Vector Control of Induction Motor using Speed Observer)

  • 이수원;전칠환;이성룡
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 추계종합학술대회
    • /
    • pp.808-811
    • /
    • 2002
  • 유도전동기 센서리스 벡터제어의 안정성에 대하여 많은 연구가 되어지고 있다. 그 결과 유도전동기의 고정자 저항, 회전자 저항, 시스템 파라미터의 변화에 대하여 센서리스 방법이 속도 센서가 있는 경우와 비교하여 불안정하게 되기 쉽다는 것이 분명하다. 본 논문에서 속도 지령 $\omega$$_{r}$일 스텝 변화에 대하여 관성 모멘트 J 를 변화하는 경우, 유도전동기 회전자 저항 R$_{r}$,을 변화하는 경우에 대해 살펴보고, 전동기의 파라미터, 시스템 파라미터의 변화에 영향을 받지 않는 제어 방법으로 전동기 전압, 전류, 전동기 정수에 의한 속도 Observer를 구성하여 속도 추정을 행하는 방법에 대하여 제안하고 타당성을 입증하고자 한다.

  • PDF

(재귀)궤환형 회전자 저항 추정기를 갖는 유도전동기의 비간섭제어 (Decoupling Control of an Induction Motor with Recursive Adaptation of Rotor Resistance)

  • 김규식
    • 조명전기설비학회논문지
    • /
    • 제12권3호
    • /
    • pp.99-103
    • /
    • 1998
  • 본 논문에서는 속도와 회전자 자속을 비간섭시킴으로써 전기설비등에 많이 적용되는 유도전동기를 고성능으로 제어할 수 있는 비선형 제어기를 제안한다. 이 비선형 제어기는 전동기 매개변수들에 대한 정보릎 필요 로한다 그중에 회전자 저항은 전동기 온도에 따라 크게 변한다. 또한, 이 비선형 제어기에 적용할 수 있는 새로운 (재귀)궤환형 회전자 저항 추정 알고리즘을 제안하고 본 알고리즘의 실용성을 입증하기 위하여 실험결과를 제시한다.

  • PDF