• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.579-579
• /
• 2003

I. Objectives The aim of this study was to evaluate and compare the effectiveness of sealer placement in simulated root canal extensions using the K file, ultrasonic file, lentulo spiral and EZ-Fill. II. Materials and Methods Forty resin blocks were attained from cutting Endo-training Bloc with diamond saw. In each parallelepiped block, the simulated root canal was made with ＃20, 08taper GT file. After each block was longitudinally split into two halves using mallet and chisel, a standardized groove of 4mm in length, located 2mmapart from the root apex, was prepared on one wall of two halves using the custom-made knife to simulate the canal extensions with various irregularities.(omitted)

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.587.1-587
• /
• 2001

The aim of this study is to compare the adaptability of thermoplasticized injectable gutta-percha technique to the canal walls in ribbon-shaped canals. Thirty resin models simulated ribbon-shaped canals were instrumented to ＃40 using. 06 taper Profile systems. Three groups of 10 resin models were obturated by the lateral condensation technique(LC) and the two thermoplasticized injectable gutta-percha technique; Ultrafil Endoset＋Obtura II(EO) and Ultrafil Firmset(UF), respectively.(omitted)

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.554-554
• /
• 2003

I. Objectives This study was done to evaluate the shaping ability of ProFile and ProTaper, K-Flexofile during instrumentation in simulated resin canals with different angles of curvature. II. Materials and Methods Ninety simulated root canals with a curvature of 15, 30 and 45 degree (following Schneider's method) were made of epoxy resin ($EPOXICURE^{TM}$, BUEHLER, USA) for this study. The canal length of simulated root canals was adjusted to 18 mm. The beginning point of curvature was positioned at 10mm from the canal orifice.(omitted)

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.327-334
• /
• 2005

This study investigated the effect of anticurvature filing method on preparation of the curved root canal using ProFile. Thirty six resin blocks were divided equally into three groups by instrumentation motions: anticurvature filing motion. circumferential filing motion and straight up-and-down motion. Each resin block was sectioned at 8mm level from the apex and at the greatest curvature of the canal and reassembled in metal mold by a modified Bramante technique. All groups were instrumented with the ProFile system. At each levels. image of sectioned surface were taken using CCD camera under a stereomicroscope at $\times40$ magnification and stored. Distances of transportation at the inner and outer area of curvature and the centering ratio were determined and compared by statistical analysis. along with the assessment of the increase of root canal cross-sectional area. The results were as follows; 1. In all groups. there was no statistical difference in the mean increase of root canal cross-sectional area. the centering ratio. and the mean distances of transportation at the inner area of curvature at each level. 2. At 8mm level from the apex. the mean distances of transportation at the outer area of curvature decreases in following order anticurvature filing motion. circumferential filing motion. straight up-and­down motion but. no significant difference at the greatest curvature of the canal among three groups. Effect of anticurvature filing motion using ProFile does not seem to be different from other instrumentation motions at the inner area of curvature in curved root canal.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.1-7
• /
• 2005

This study was carried out to investigate on the formation of resin canal, tylosis and latewood of the major species growing in Chuncheon. Two species of softwoods (Pinus densiflora and Pinus koraiensis) and two species of hardwoods (Quercus mongolica and Robinia pseudoacacia) were used in this experiment. The resin canals of P. densiflora and P. koraiensis were formed from the beginning through the middle of July and in the beginning of May, respectively. It is clear that the resin canal of P. koraiensis was formed much earlier than that of P. densiflora. The tylosis in vessel of Q. mongolica was formed in the middle of May, and the formation in R. pseudoacacia was in the end of May. The latewood in P. densiflora was formed in the middle of August. The latewood in P. koraiensis was formed from the end of September through the beginning of October. While latewood vessels in Q. mongolica were formed in the end of May, and those in R. pseudoacacia from the beginning of June through the middle of June. Consequently, the period of resin canals, tyloses and latewood formation was different among the sample trees, even though the trees were grown under the same conditions.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.147-152
• /
• 2006

The purpose of this study was to evaluate the influence of the AH-26 root canal sealer on the shear bond strength of composite resin to dentin. One hundred and forty four (144) extracted, sound human molars were used. After embedding in a cylindrical mold, the occlusal part of the anatomical crown was cut away and trimmed in order to create a flat dentin surface. The teeth were randomly divided into three groups; the AH-26 sealer was applied to the AH-26 group, and zinc-oxide eugenol (ZOE) paste was applied to the ZOE group. The dentin surface of the control group did not receive any sealer. A mount jig was placed against the surface of the teeth and the One-step dentin bonding agent was applied after acid etching. Charisma composite resin was packed into the mold and light cured. After polymerization, the alignment tube and mold were removed and the specimens were placed in distilled water at $37^{\circ}C$ for twenty four hours. The shear bond strength was measured by an Instron testing machine. The data for each group were subjected to one-way ANOVA and Tukey's studentized rank test so as to make comparisons between the groups. The AH-26 group and the control group showed significantly higher shear bond strength than the ZOE group (p<0.05). There were no significant differences between the AH-26 group and the control one (p>0.05). Under the conditions of this study, the AH-26 root canal sealer did not seem to affect the shear bond strength of the composite resin to dentin while the ZOE sealer did. Therefore, there may be no decrease in bond strength when the composite resin core is built up immediately after a canal filling with AH-26 as a root canal sealer.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.419-425
• /
• 2007

The aim of this study was to evaluate the radiopacity and cytotoxicity of three resin-based (AH 26, EZ fill and AD Seal), a zinc oxide-eugenol-based (ZOB Seal), and a calcium hydroxide-based (Sealapex) root canal sealers. Specimens, 10 mm in diameter and 1 mm in thickness, were radiographed simultaneously with an aluminum step wedge using occlusal films, according to ISO 6876/2001 standards. Radiographs were digitized, and the radiopacity of sealers was compared to the different thicknesses of the aluminum step wedge, using the Scion image software. Using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the cytotoxicity of each material was determined in immortalized human periodontal ligament (IPDL) cells. The results demonstrated that EZ fill was the most radiopaque sealer, while Sealapex was the least radiopaque (p < 0.05). AH 26, AD Seal and ZOB Seal presented intermediate radiopacity values. All the materials evaluated, except for Sealapex, presented the minimum radiopacity required by ISO standards. The cell viabilities of resin-based root canal sealers were statistically higher than that of other type of root canal sealers through the all experimental time. Further, EZ fill showed statistically lower cell viability in 24 and 48 hours compared to AD Seal and in 72 hours compared to all other resin-based root canal sealers. However, there was no correlation between the radiopacity and cytotoxicity of three resin-based root canals sealers (p > 0.05). These results indicate that resin-based root canal sealer is more biocompatible and has advantage in terms of radiopacity.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.9-15
• /
• 2006

The quality of wood is largely depend on the characteristics of xylem tissue and their variation. They may include tracheid length, microfibril angle, distribution and amount of resin canal, as well as specific gravity as indicator of material properties. In this study, variation of these elements between and within 30 superior families of Pinus densifloa in progeny test forest were examined and the results are as follows; In terms of elongation ratio of tracheid length which is less than 1%, the sample tree showed a transition to matured wood after 13 years particularly in Kangwon 25, 30, 90, 56 and Chungnam 4 families. The average specific gravity were from 0.35 to 0.49, and differences between the families were significant. Number of transverse resin canal per unit area were also found to be significant between the families. The microfibril angles measured at 15th ring number ranged from 0.9 degree to 28.6 degree. More studies are necessary to tell whether these variation is inherited by genetic or individual characteristic. However it would be desirable that these elements be considered as key elements in the early stage of selection process of superior tree to ensure good quality of wood production in future.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.50-57
• /
• 2006

The purpose of this study was to investigate influence of each file step of $ProTaper^{(R)}$ system on canal transportation. Twenty simulated canals were prepared with either engine-driven $ProTaper^{(R)}$ or manual $ProTaper^{(R)}$, Group R-resin blocks were instrumented with rotary $ProTaper^{(R)}$ and group M-resin blocks were instrumented with manual $ProTaper^{(R)}$. Pre-operative resin blocks and post-operative resin blocks after each file step preparation were scanned. Original canal image and the image after using each file step were superimposed for calculation of centering ratio The image after using each file step alld image after using previous file step were superimposed for calculation of the amount of deviation. Measurements were taken horizontally at five different levels (1 2, 3, 4 and 5 mm) from the level of apical foramen. In rotary $ProTaper^{(R)}$ instrumentation group, centering ratio and the amount of deviation of each step at all levels were not significantly different (p>0.05). In manual $ProTaper^{(R)}$ instrumentation group, centering ratio and the amount of deviation of each step at all levels except of 1 mm were not significantly different (p>0.05). At the level of 1 mn, F2 file step had significantly large centering ratio and the amount of deviation (p<0.05). Under the condition of this study, F2 file step of manual ProTaper tended to transport the apical part of the canals than that of rotary $ProTaper^{(R)}$.

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.101-108
• /
• 2012

In 2006, pinewood nematode, Bursaphelenchus xylophilus, was isolated from about 50 years old trees of Pinus densiflora and P. koraiensis showing leaf-wilt and -drying symptoms in Gwangju, Gyeonggi-do and Chuncheon, Gangwon-do. Isolation of pinewood nematodes from sapwood of infected pine trees showed no difference in population density between tree species and among the sampling heights on the main stem. Migration of pinewood nematodes in the host tree were investigated by inoculation of red pine (P. densiflora, 3 years old) seedlings with B. xylophilus. The nematodes seemed to move in red pine seedlings prior to multiplication and it might have taken about 20 days to start multiplication and expression of symptoms including wilt and dieback. In initial time after inoculation, nematodes started migration through the cortical resin canal from inoculated site and further showed upward and downward movements. More nematodes were observed in cortical resin canal during early period of inoculation and later in resin canal of xylem and tracheid also while, the pith still remained free from nematode. The density of B. xylophilus was higher in seedlings of low-vigor with poor root growth than in seedlings of normal root growth. Seedlings showing high density of B. xylophilus exhibited stem discoloration and secondary infection by fungus at the inoculation site.