• Clean Technology
• /
• v.30 no.1
• /
• pp.28-36
• /
• 2024

As demand for electric vehicles increases, the market for lithium-ion batteries is also rapidly increasing. The battery life of lithium-ion batteries is limited, so waste lithium-ion batteries are inevitably generated. Accordingly, lithium was selectively preleached from waste lithium iron phosphate (LiFePO₄, hereafter referred to as the LFP) cathode material powder among lithium ion batteries, and iron phosphate (FePO₄) powder was recovered. The recovered iron phosphate powder was mixed with alkaline sodium carbonate (Na₂CO₃) powder and heat treated to confirm its crystalline phase. The heat treatment temperature was set as a variable, and then the leaching rate and powder characteristics of each ingredient were compared after water leaching using Di-water. In this study, lithium showed a leaching rate of approximately 100%, and in the case of powder heat-treated at 800 ℃, phosphorus was leached by approximately 99%, and the leaching residue was confirmed to be a single crystal phase of Fe₂O₃. Therefore, in this study, lithium, phosphorus, and iron components were individually separated and recovered from waste LFP powder.

• Tuberculosis and Respiratory Diseases
• /
• v.87 no.4
• /
• pp.494-504
• /
• 2024

Background: Ubiquitin C-terminal hydrolase L1 (UCHL1), which encodes thiol protease that hydrolyzes a peptide bond at the C-terminal glycine residue of ubiquitin, regulates cell differentiation, proliferation, transcriptional regulation, and numerous other biological processes and may be involved in lung cancer progression. UCHL1 is mainly expressed in the brain and plays a tumor-promoting role in a few cancer types; however, there are limited reports regarding its role in lung cancer. Methods: Single-cell RNA (scRNA) sequencing using 10X chromium v3 was performed on a paired normal-appearing and tumor tissue from surgical specimens of a patient who showed unusually rapid progression. To validate clinical implication of the identified biomarkers, immunohistochemical (IHC) analysis was performed on 48 non-small cell lung cancer (NSCLC) tissue specimens, and the correlation with clinical parameters was evaluated. Results: We identified 500 genes overexpressed in tumor tissue compared to those in normal tissue. Among them, UCHL1, brain expressed X-linked 3 (BEX3), and midkine (MDK), which are associated with tumor growth and progression, exhibited a 1.5-fold increase in expression compared to that in normal tissue. IHC analysis of NSCLC tissues showed that only UCHL1 was specifically overexpressed. Additionally, in 48 NSCLC specimens, UCHL1 was specifically upregulated in the cytoplasm and nuclear membrane of tumor cells. Multivariable logistic analysis identified several factors, including smoking, tumor size, and high-grade dysplasia, to be typically associated with UCHL1 overexpression. Survival analyses using The Cancer Genome Atlas (TCGA) datasets revealed that UCHL1 overexpression is substantially associated with poor survival outcomes. Furthermore, a strong association was observed between UCHL1 expression and the clinicopathological features of patients with NSCLC. Conclusion: UCHL1 overexpression was associated with smoking, tumor size, and high-grade dysplasia, which are typically associated with a poor prognosis and survival outcome. These findings suggest that UCHL1 may serve as an effective biomarker of NSCLC.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.1
• /
• pp.104-109
• /
• 2010

Hydro-thermal liquefaction technology for rapeseed straws was investigated the biomass conversion rate with different catalysts and reaction temperatures. NaOH and KOH were used for catalysts, and the reaction temperature were ranged from 180 to $320^{\circ}C$ at every $20^{\circ}C$ of intervals for 10 minutes. The reaction was carried out in a 5,000 mL liquefaction system with dispenser and external electrical furnace. Raw materials (160g), 2,000 mL of distilled water and 10% (wt/wt) of catalyst to plant residue were fed into the reactor. It was observed that the maximum crude oil yield was about 36% at temperature range, $260{\sim}280^{\circ}C$ with KOH and at $300^{\circ}C$ with NaOH, respectively. It was observed that the more calorific values of crude oil, the higher reaction temperature with KOH, but it had the reverse pattern in NaOH.

• Korean Chemical Engineering Research
• /
• v.62 no.4
• /
• pp.335-343
• /
• 2024

This study was conducted to confirm the potential of adhesive resins formulated with rapeseed flour (RSF), which is a residue in the production of edible oil, for the manufacture of medium-density fiberboards (MDF). The RSF-based adhesive resins were formulated with the weight ratio of RSF hydrolyzates (80, 70, 60 wt%) to PF prepolymer(20, 30, 40 wt%), MDF was fabricated in accordance with its resin content and target density using the RSF-based adhesive resin, and then the physical properties(density, moisture content, bending strength, internal bonding strength and thickness swelling) and formaldehyde emission of the MDF were measured. The effect of the weight ratio of RSF hydrolyzate to PF prepolymer was the greatest, followed by that of target density and resin content. The values of MDF fabricated with RSF-based adhesive resins exceeded those with urea-formaldehyde resins, which is mostly used as a resin in the manufacture of MDF. Based on the results of MDF per experimental factors, the optimal conditions were determined to target density of 0.7 g/cm³, resin content of 5% and PF-prepolymer weight ratio of 40 wt% in RSF-based adhesive resin, and physical properties and formaldehyde emission of the MDF fabricated with the conditions satisfied the requirements for MDF and E₀ grade, which was designated by National Institute of Forest Science, except for thickness swelling. In conclusion, the potential of RSF-based adhesive for the production of MDF could identify on the basis of the results of this study. However, the stable securement of RSF through the development of bio-refinery process for rape plant is required to commercialize RSF-based adhesive resins for MDF production.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.235-242
• /
• 2014

The purpose of this study is the establishment of scientific processes for making food safety policies. Thus, we investigated pesticide residue level of the agricultural commodities from market, and performed risk assessment. Fifteen agricultural items are chosen based on the frequency of Korean consumption. The samples were collected from 9 cities where populations are more than one million. Total 283 active ingredients were monitoring ( total sample number =232). Single-analysis of target pesticides was for three kinds of possible growth regulators and the multicomponent analysis was for 280 kinds of pesticides, a total of 283 species were selected to perform the pesticide residues. Before monitoring the analytes, the improvements of the analytical methods were done by method validations under the CODEX analytical method development guidelines and can produce metrics that represent the international standards applied in accordance with the guidelines. In addition to residual pesticides detected during monitoring we compare the ADI to EDI values using detected result and dietary consumption data which is extracted from annual market basket survey. The 163 samples were non-detected in the total 232 samples so it means that every agricultural commodity will residual pesticides-free in 70.3%. The detected residual pesticides showed for a total of 69 cases (29.7%). Two of samples violate Korean MRL (0.9%). The ratio of EDI compared to ADI resulted in only from 0.00087 to 0.902%. In result, we can assume that all detected residual pesticides are very safe level and current policies of Korean pesticides control may be working.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.267-277
• /
• 2014

Objective of this paper is to assess the available data on the pesticide uses and regulations in the golf courses, and provide the nationwide systematic management options. Numbers of golf courses in Korea are rapidly increasing from 2000s and reached at 421 sites by the end of 2011. Accordingly pesticide usage has been increased with years in direct proportion to the increasing number of golf courses. Amounts of pesticide applied in 2011 were 118,669 kg as of an active ingredient and were in the orders of fungicides (54.9%) > insecticides (24.4%) > herbicides (13.3%) > growth regulators (0.1%). Average pesticide usages in 2011 were 280.9 kg per golf course and $5.4kg\;ha^{-1}$. Frequencies of the residual pesticide detections in green and turf were higher than those in fairway and soil, respectively. Residue of highly toxic pesticides was not detected in golf courses. Ministry of Environment in 2010 has developed the 'golf course pesticide monitoring and management system' which is the advanced online registry for kind and amount of pesticides applied in each golf course. This system is intended for monitoring of the pesticide uses and residual levels and protecting the environmental pollution from pesticides in the golf course. In 2009, management of pesticides in the golf courses became the task of Ministry of Environment, being merged from many federal agency and ministries. The protocol for the site-specific best management practices, on which to base results from the risk assessment, should be set for pesticides in the golf to minimize the environmental impacts.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.156-162
• /
• 2008

Salmonellosis is a major bacterial zoonosis that causes a variety of disease syndromes, self-limited enteritis to fatal infection in animals and food-borne infection and typhoid fever in humans. Recently, the emergence of multidrug resistant strains of Salmonella spp. causes more serious problems in environment and public health. The present study was investigated the antibacterial effect of Houttuynia cordata ethanol extract(HCEE) for murine salmonellosis. In the cytotoxic effect of HCEE on RAW 264.7 cells, there was no detectable effect with any concentrations between 25 and 100 ${\mu}g/ml$ after 8 h incubation. The bacteriocidal effect of HCEE was not showed on a Salmonella enterica serovar Typhimurium(S. typhimurium). HCEE makes morphological change of the RAW 264.7 cells, and there was significant decreased bacterial uptake and intracellular replication within Salmonella infected cells. And further nitric oxide(NO) production of Salmonella infected RAW 264.7 cells with HCEE was decreased comparing to RAW 264.7 cells without HCEE until 8 h post infection. Oral administration of HCEE showed a therapeutic effect for S. typhimurium infected BALB/c mice. The mortality of HCEE treated mouse was 80% until 12 days, while that of HCEE untreated mouse was 100 % until 8 days after lethal dose of S. typhimurium infection. These data suggested that HCEE has a potency treatment for intracellular replicative pathogen including salmonellosis, brucellosis, tuberculosis, listeriosis etc., and the application of HCEE makes new strategies for safety medicine development without antibiotic resistance bacterial appearance and residue problem in food and solves the public health problem from antibiotic mis- and over use.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.237-243
• /
• 1993

The primary and secondary structure of the 5S rRNA isolated from Xanthomonas celebensis were determined by enzymatic and chemical degradation methods. It consists of 119 nucleotides and contains no modified nucleosides. As with the 5S rRNAs of X. maltophilia and X. citri, it contains an additional uridine residue on the 5'-terminus. Its secondary structure was almost identical to the models previously proposed by us for the 5S rRNA of two Xanthomonas species. Its secondary structure consists of five helices, five loops and two bulges. The tertiary interactions in the 5S rRNA molecule were analyzed by Fe(II)-EDTA treatment and hybridization method using deoxyhexamer. From the fact that some adenine residues in loop M, region $I_1-C$, loop $H_1$, and loop $H_2$ become susceptible to diethylpyrocarbonate when the 5S rRNA was hybridized with deoxyhexamer complementary to the sequence $U_{35}CCCAU_{40}$ and that some nucleotide residues in loop M, loop $H_1$ and region $D-I_2$ become resistant Fe(II)-EDTA cleavage in the presence of $Mg^{2+}$, it is presumed that loops $H_1$ and $H_2$ interact with loop M in some way. In the tertiary interaction, the regions $I_1-C$ and $D-I_2$ seem to act as hinges in folding the stems $B-I_1-C$ and $D-I_2-E.$ It was found that loop $H_1$ changes into a smaller loop of three bases by forming noncanonical A : C base-pairs ih acidic environment.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.26-29
• /
• 2011

Purpose: The general test method of the Korean Pharmacopeia specifies the test method on the clauses of quality control after manufacturing. According to KFDA Guidance for Medicines, standards of residual solvents regulates the maximum permissible dose of acetonitrile as 400 ppm, ethanol as 5,000 ppm, and acetic acid as 5,000 ppm. This study aims at identifying the type of resiual solvents in the final [F-18]FDG vial of an automatic synthesizer and measure its residual quantity. Materials and Methods: The center carried out residual solvents test of [F-18]FDG injection using Agilent Technologies 7890A with a Flame Ionization Detector. The column of Agilent Technologies 7890A used in measuring of residual solvents was CP WAX column ($30m{\times}0.53mm{\times}1.0{\mu}m$) and analysis condition was split mode 1:1 at the initial temperature $70^{\circ}C$ which was increased $20^{\circ}C/minute$ after two minutes and maintained at the final $140^{\circ}C$ for two minutes. The analysis method was as following: Firstly, ethanol-acetonitrile-acetic acid mixture was classified into four types of concentration (250-25-250 ppm, 1,000-100-1,000 ppm, 3,000-300-3,000 ppm, and 6,000-600-6,000 ppm), and $1.0{\mu}L$ of each type of concentration was injected into gas chromatography followed by an analysis of its peak domain. Then, a calibration-curve by the external standard method was drawn based on the analysis result. Results: While ethanol and acetonitrile were detected in TRACERlab MX, FASTlab had additional acetic acid. The residual quantity of the ethanol-acetonitrile-acetic acid mixture evaluated using the calibration-curve was average 72 ppm ethanol, 54 ppm acetonitrile, and 1030 ppm acetic acid for FASTlab, whereas average 439 ppm ethanol and 79 ppm acetonitrile for TRACERlab MX. This indicated that both of them were within the maximum permissible dose. Conclusion: Solvent residues in the [F-18]FDG injection were all within maximum permissible doses and proper to be used to examine a patient. The result indicated that types and quantities of solvent resides of radioactive pharmaceuticals vary depending on the automatic synthesizer.

• The Korean Journal of Pesticide Science
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2012

This study was carried out to elucidate the residual characteristics and calculate processing factors of difenoconazole in ginseng and its processed products, such as dried ginseng, red ginseng and their water and alcohol extracts. The pesticide was sprayed onto the ginseng according to its pre-harvest intervals in 2009 (four-year-old ginseng) and 2010 (five-year-old ginseng). Harvested ginseng was processed to dried ginseng, red ginseng and their extracts according to the commercially well-qualified conventional methods provided by the Korea Ginseng Corporation. Limit of detection (LOD) and limit of quantitation (LOQ) of difenoconazole in fresh ginseng were 0.001 and 0.003 mg/kg, respectively. In case of processed ginseng products, their levels were 0.002 and 0.007 mg/kg, respectively. Concentration of difenoconazole in both fresh ginseng and its processed products increased with the experimental period. Processing factors, calculated as a ratio of difenoconazole concentration in processed products to fresh ginseng were found to be 1.71 to 2.17 and 1.62 to 2.03 in case of dried and red ginseng, respectively, while those for their extracts ranged from 1.76 to 2.98. In case of five-year-old dried ginseng and red ginseng as well as their extracts, the ranges of processing factor of difenoconazole were found to be 2.9 to 3.1, 1.9 to 2.2 and 2.4 to 4.7, respectively.