• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3495-3501
• /
• 2013

연속경간을 가지는 I형강 교량은 내부 지점 부근에 상대적으로 큰 부모멘트가 발생하게 된다. 따라서 경제적인 단면 활용을 위하여 내부지점부위의 상부 및 하부 플랜지에 플레이트를 보강한 변단면을 사용하고 있다. 본 논문에서는 기존 탄성 횡-비틀림 좌굴식에 관한 연구를 토대로 하여 비탄성 구간에 있는 일축대칭 I형 양단 스텝보의 횡-비틀림 좌굴강도 해석을 실시하였다. 유한요소해석 프로그램인 ABAQUS가 사용되었으며, 회귀분석프로그램을 활용하여 간편 설계식을 제안하였다. 양단 스텝보에 순수휨이 작용할 때를 고려하였으며, 비선형 해석을 위해 잔류응력 및 초기변형을 고려하였다. 본 연구를 통하여 개발 제안된 식은 일축대칭 스텝보의 비탄성 횡-비틀림 좌굴 강도에 널리 사용될 수 있으며 유사연구에 크게 기여할 것이다.

• 대한토목학회논문집
• /
• 제14권2호
• /
• pp.257-268
• /
• 1994

강진과 같은 큰 반복하중하에서 강부재 및 그들요소의 균열과 파단에 영향을 미치는 중요한 물리적 인자들을 찾아내어, 그 인자들간의 정량적인 관계를 규명하기 위해 실험적 연구를 수행하였다. 9개의 강판요소와 28개의 앵글 강부재를 시험체로서 사용하였으며, 비탄성 좌굴이 포함된 축방향의 반복하중을 5~20회 정도 받았다. 본 실험은 극저사이클 파괴거동에 있어서 제하이력과 파괴형태 및 단면형상의 영향평가에 특히 촛점을 두었다. 실험결과, 에너지 소산능력은 실험변수에 크게 의존하였으며, 균열의 발생 또는 파단과 에너지 소산능력 사이에 단순한 정량적 관계가 성립되지 않았다. 그러나, 실험변수에 관계없이 균열발생부에 있어서 잔류변형률의 최대치는 일정한 값을 보여주었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권7호
• /
• pp.961-966
• /
• 2008

Direct and maternal genetic parameters for production traits in 1,642 pigs and maternal genetic correlations among production (1,642 pigs) and feed efficiency (380 boars) traits were estimated in 7 generations of a Duroc population. Traits studied were daily gain (DG), intramuscular fat (IMF), loineye area (LEA), backfat thickness (BF), daily feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI). The RFI was calculated as the difference between actual and predicted feed intake. The predicted feed intake was estimated by adjusting the initial test weight, DG and BF. Data for production traits were analyzed using four alternative animal models (including direct, direct+maternal permanent environmental, or direct+maternal genetic+maternal permanent environmental effects). Direct heritability estimates from the model including direct and all maternal effects were $0.41{\pm}0.04$ for DG, $0.27{\pm}0.04$ for IMF, $0.52{\pm}0.06$ for LEA and $0.64{\pm}0.04$ for BF. Estimated maternal heritabilities ranged from $0.04{\pm}0.04$ to $0.15{\pm}0.05$ for production traits. Antagonistic relationships were observed between direct and maternal genetic effects ($r_{am}$) for LEA (-0.21). Maternal genetic correlations of feed efficiency traits with FI ($r_g$ of FI with FCR and RFI were $0.73{\pm}0.06$ and $0.90{\pm}0.05$, respectively) and LEA (rg of LEA with FCR and RFI were $-0.48{\pm}0.05$ to $-0.61{\pm}0.05$, respectively) were favorable. The estimated moderate genetic correlations between direct and maternal genetic effects for IMF and LEA indicated that maternal effects has an important role in these traits, and should be accounted for in the genetic evaluation system.

• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.187-200
• /
• 1996

After loss of tooth, initial healing process is critical to preserve residual alveolar process. This study was conducted to compare the effect of hydroxylapatite particle synthetic graft and guided tissue regeneration procedure on healing of extraction wounds in 5 mongrel dogs. To investigate the maturity of bone and velocity of bone heating, bone-labeled tracers were used. After 16 weeks healing period, dogs were sacrificed. The specimens were treated with Villanueva bone stain. Fluorescence microscopy and polarized microscopy were performed to exam the pattern of bone formation in the extraction socket. The results were following ; 1. Pattern of bone regeneration in the group of hydroxylapatie graft and the group of membrane protection after hydroxylapatite graft was following ; bone regeneration was slow, regenerated bone was immature, and thickness of cortical layer was thin compare to that of untreated control group. 2. Cortical layers in membrane protected group were somewhat thicker but less condense to that of untreated control group. 3. Infiltration of inflammation cells were found in the groups using hydroxylapatite graft and membrane. We concluded that grafting of replamineform hydroxylapatite particles into the extraction socket delayed healing of the wound and disturbed the formation of cortical bone at the roof of extraction socket. The placement of expanded polytetrafluoroethylene membranes on the extraction socket promotes the bone regeneration. But newly formed bone in cortical layer consists of the cortico-cancellous bone in comparison with the cortical bone of the control group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.29.1-29.9
• /
• 2016

Background: The objective of this study was to evaluate xenograft degradation velocity when treated with 4-hexylresorcinol (4HR). Methods: The scapula of a cow was purchased from a local grocery, and discs (diameter 8 mm, thickness 1 mm) were prepared by trephine bur. Discs treated with 4HR were used as the experimental group. Untreated discs were used as the control. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), antibacterial test, endotoxin test, and scanning electron microscopy (SEM) were performed on the discs. In vivo degradation was evaluated by the rat calvarial defect model. Results: The XRD and FT-IR results demonstrated successful incorporation of 4HR into the bovine bone. The experimental disc showed antibacterial properties. The endotoxin test yielded results below the level of endotoxin contamination. In the SEM exam, the surface of the experimental group showed needle-shaped crystal and spreading of RAW264.7 cells. In the animal experiments, the amount of residual graft was significantly smaller in the experimental group compared to the control group (P = 0.003). Conclusions: In this study, 4HR was successfully incorporated into bovine bone, and 4HR-incorporated bovine bone had antibacterial properties. In vivo experiments demonstrated that 4HR-incorporated bovine bone showed more rapid degradation than untreated bovine bone.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.647-656
• /
• 2011

방사성 폐기물 처분 시설과 같은 지하 구조물의 콘크리트 부재가 장기간에 걸쳐 지하수(이온교환수)와 접촉하면 이온교환수와 공극수 사이에 농도구배가 발생한다. 이로 인해 공극수로부터 칼슘이온이 용출되고, 콘크리트의 열화가 진행된다. 따라서 이 연구에서는 콘크리트의 칼슘 용출에 의한 내부공극 구조의 변화를 분석하고, 열화된 콘크리트의 강도 특성을 평가하고자 하였다. 연구 결과, 콘크리트의 칼슘이온이 용출됨에 따라 50~500 nm 크기의 공극들이 상당히 증가하게 되며, 용출 초기에는 200 nm 크기 이상의 공극들이 급격히 증가하고 이후에는 200 nm 크기 이하의 공극들이 증가하는 것으로 나타났다. 칼슘이 용출된 두께가 증가함과 더불어 압축강도는 감소하였으며, 칼슘이 용출된 OPC 콘크리트의 잔류강도는 대략 33~58% 정도로 나타났다.

• 에너지공학
• /
• 제11권1호
• /
• pp.18-25
• /
• 2002

침부식 (FAC, Flow-Accelerated Corrosion)에 의한 감육 문제는 원자력 발전소 배관관리에 있어서 매우 중요하다. 특히 FAC는 배관 내부 유체의 pH, 용존산소 농도, 유체 온도, 유속 및 습증기 분율 등과 배관의 형상 및 재료 등의 특정 조건에서만 발생하므로, FAC 문제를 관리하기 위해서는 체계적인 접근이 필요하다. 본 연구에서는 국내 특정 CANDU원전의 2차계통 배관을 대상으로 관련 데이터베이스 구축, 구축된 데이터베이스를 이용한 FAC감육율의 예측 및 배관 잔여수명의 평가 등을 수행하였다. 또한 FAC 발생기구 및 FAC에 영향을 주는 요인에 대해서도 조사하였다. 습분분리기와 플래시탱크 사이 배관 라인의 해석 예로부터 FAC 문제를 관리하는 방안을 제시하였다. 제시된 방안은 국내 다른 원자력발전소의 배관 관리에도 활용될 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권7호
• /
• pp.848-854
• /
• 2010

The objectives of this study were to estimate genetic parameters for the carcass price and carcass traits contributing to carcass grading and to investigate the influence of each carcass trait on the carcass price using multiple regression and path analyses. Data for carcass traits and carcass prices were collected from March 2003 to January 2009 on steers of Korean cattle raised at private farms. The analytical mixed animal model, including slaughter house-year-month combination, linear and quadratic slaughter age as fixed effects and random animal and residual effects, was used to estimate genetic parameters. The effects of carcass traits on the carcass price were evaluated by applying multiple regression analyses. Heritability estimates of carcass traits were $0.20{\pm}0.08$ for carcass weight (CWT), $0.33{\pm}0.10$ for back fat thickness (BFT), $0.07{\pm}0.05$ for eye-muscle area (EMA) and $0.25{\pm}0.10$ for marbling score (MS), and those of carcass prices were $0.21{\pm}0.10$ for auction price per 1 kg of carcass weight (AP) and $0.13{\pm}0.07$ for total price (CP). Genetic correlation coefficients of AP with CWT and MS were $-0.35{\pm}0.29$ and $0.99{\pm}0.04$, respectively, and those of CP with CWT and MS were $0.59{\pm}0.22$ and $0.39{\pm}0.29$ respectively. If an appropriate adjustment for temporal economic value is available, the moderate heritability estimates of AP and CP might suggest their potential use as the breeding objectives for improving the gross incomes of beef cattle farms. The large genetic correlation estimates of carcass price variables with CWT and MS implied that simultaneous selection for both CWT and MS would be also useful in enhancing income.

• 대한의생명과학회지
• /
• 제22권4호
• /
• pp.140-149
• /
• 2016

All pesticides must be assessed strictly whether safe or not when agricultural operators are exposed to the pesticides in farmland. A pesticide is commonly regarded as safe when estimated dermal absorption amount is lower than the acceptable operator's exposure level (AOEL). In this study, dermal absorption rate of chlorpyrifos, a widely used organophosphate insecticide, was investigated using rat dermal tissue model. Chlorpyrifos wettable powder solved in water (250, 500 and 2,500 ppm) was applied to freshly excised rat dermal slices ($341{\sim}413{\mu}m$ thickness) on static Franz diffusion cells at $32^{\circ}C$ for 6 hours. After exposure period of 6 hours, and then washing-at residual amount of chlorpyrifos was analyzed in dermal tissues, tape strips, washing solution, washing swabs of receptor bottles and receptor fluids at 1, 2, 4, 8 and 24 hours. Chlorpyrifos was only detected in dermal tissue but not found in receptor fluid at each concentration and time point, and the absorption rate of 250, 500 and 2,500 ppm was 2.36%, 1.96% and 1.69%, respectively. The estimated exposure level of chlorpyrifos was calculated as 0.012 mg/kg bw/day. The health risk for farmers in this condition is a level of concern because the estimated exposure level is 12 times higher than AOEL 0.001 mg/kg bw/day. However, actual health risk will be alleviated than estimated because absorbed chlorpyrifos is not permeated into internal body system and only retained in skin layer.

• 한국강구조학회 논문집
• /
• 제27권4호
• /
• pp.377-386
• /
• 2015

본 연구에서는 공칭인장강도 800MPa급 고강도강재(HSA800)로 제작된 중간주의 중심압축실험을 통해 좌굴강도를 평가하여 현행 구조설계기준(KBC2009, 2010 AISC-LRFD) 기둥곡선의 비탄성영역 적용성 여부를 검토하였다. 강도로 무차원화한 판폭두께비와 판단부 지지조건 및 기둥 세장비를 변수로 하였으며, 고강도강재와 일반강재의 좌굴거동 차이 여부를 확인하기 위해 일반강재(SM490)로 제작된 비교실험체를 포함시켰다. 실험결과 중심압축을 받는 모든 HSA800 중간주 실험체는 현행 강구조기준의 설계좌굴강도를 충분히 발휘하였으나 일부 SM490 실험체는 설계강도를 하회하였다. 이는 고강도강재의 잔류응력에 의한 강도저하가 일반강재에 비해 작기 때문으로 판단된다.