• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.232-238
• /
• 1995

The thermal stress distribution of WC and Ni binder phases In WC-26st.%Ni and WC-6wt.%Ni composites has been investigated over the temperature range 100-900 K using a time-of-flight neutron diffractometer. To determine the stress distribution, the breadths of WC and Ni peaks in the reference powder and the composites were analyzed. The peak breadths were corrected for particle size effect using a procedure based on the integral peak breadth method of particle size-strain analysis. The result shows a broad range of strain, and thus stress, is present in the WC and Ni binder phases of the composites. The strain distribution of both phases broadens as the temperature decreases, and some fraction of total strain distribution of the WC phase remains tensile regardless of the temperature. The strain distribution of the WC phase broadens as the binder content increases, and that of Ni binder phase broadens as the binder content decreases, which means the strain distribution broadens as the absolute value of residual stress increase.

• Journal of the Korean Ceramic Society
• /
• v.32 no.6
• /
• pp.697-702
• /
• 1995

The rough growth surfaces of diamond films fabricated by the hot filament CVD were polished using thermomechanical polishing method. And then, its application to the optical windows was discussed through the measurement of transmittance in the range of infrared radiation and analysis of surfaces structure. The results were compaerd with those of the films polished with conventional mechanicla polishing. The transmittance of the mechanically polished film reached 57~66% over the whole range from 500 to 4000 cm-1. But the transmittance of the film polished with thermomechanical polishing method was reduced below 35%. This decrease in transmittance was due to both the graphitization of diamond on the polished surface and the growth of $\beta$-SiC at diamond/Si interface during polishing. The residual Fe in hte thermomechanically polished surface was confirmed by SIMS analysis. This Fe played the role of the graphitization of near surface region of the diamond film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.34-34
• /
• 2010

This paper describes effect of the bending deformation of high voltage composite bushing with winding tension. The composite bushing can be formed, by adding silicone rubber sheds to a tube of composite materials. The FRP tube is internal insulating part of a composite bushing and is designed to ensure the mechanical characteristics. Generally the properties of FRP tube can be influenced by the winding angle, wall thickness and winding tension. As winding tension is increased glass contents was increased in the range of 70.4~76.6%. In the bending test, winding tension is increased residual deflection was decreased in the range of 14.0~12.2 mm.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.635-639
• /
• 1998

The thermal degradation pattern of $\alpha$-, ${\gamma}$-and $\delta$-tocopherols in glycerol was investigated during heating at 100~25$0^{\circ}C$ for 5-60 min in the absence of oxyge. The tocopherols and thermally decomposed products were separated by HPLC with a reversed phase $\mu$-Bondapak C18-column. The degradation pattern of $\alpha$-tocopherol during the heating in the absence of oxygen was different from those of ${\gamma}$-and $\delta$-tocopherols. But the degradation patterns of ${\gamma}$-and $\delta$-tocopherols were similar to each other. The residual content of $\alpha$-tocopherol during the heating in the absence of oxygen decreased to the range 12~65% and those of ${\gamma}$-and $\delta$-tocopherols decreased to the range 4~96%. The thermal degradation of tocopherols in the absence of oxygen was less than that in the presence of oxygen.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2014

In this paper, a novel MBE (Model Based target size Estimator) is presented for SDIIR (Strap Down Imaging Infrared) seekers. The target tracking requires the target size information for which residual range between target and missile should be provided. Unfortunately, in general, the missile with passive sensor such as IIR (Imaging Infrared), CCD (Coupled Charging Device) cannot obtain range information. To overcome the problem, the proposed method enables the SDIIR seeker to estimates target size by using target size model and track the target. The performance of proposed method is tested at IIR target tracking of target intercept scenario. The experiment results show that the proposed algorithm has the relatively good performance.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.68-71
• /
• 2005

We conducted simple experiments to consider the influence of nonlinear groundwater flow on Trichloroethylene (TCE) as Dense Non-Aqueous Phase Liquid (DNAPL) migration in a rough walled single fracture. A glass replica of a granite sample containing a rough single fracture was made and experiments were conducted over a range of Re. Observations are compared to the results of TCE migration tests that were conducted in two parallel glass plates over the same range of Re. Results show nonlinear groundwater flow in a single fracture affect TCE migration path and residual saturation of TCE.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.113-114
• /
• 2014

Though polymer cement mortar is widely used to repair or reinforce concrete as it has superior adhesion, dense internal structure, chemical resistance, and workability in comparison to those of general cement mortar, studies on its behaviors in high temperature environment such as fire is urgently required. Accordingly, in this experiment, the degrees of reduction in the compressive strength at different temperatures was grasped applying ISO834 Heating Curve, and the effect of polymer content and type on compressive strength could be determined. As a result of this experiment, it is found that polymer type and content have a big effect on reduction of compressive strength in high temperature range, and not only the dynamic characteristics but also the combustion characteristics in high temperature range are required to be studied considering occurrence of a fire in the future.

• ETRI Journal
• /
• v.40 no.1
• /
• pp.101-110
• /
• 2018

In wireless positioning systems using range measurements non-line-of-sight (NLOS) links cause estimation errors. Several studies have attempted to improve the positioning performance by mitigating these NLOS errors. These studies, however, have focused on the performance of a dataset consisting of three or more links. Therefore, measurement errors induced by links are averaged, and a reliable link is not fully utilized in the dataset. This paper proposes a Link Reliability based on Range Measurement (LRRM) scheme, which specifies the relative reliability of each link using residuals. The link reliability becomes the input to a Link Residual Weighting (LRW) scheme, which is also proposed as a weighted positioning scheme. Moreover, LRRM and LRW constitute new turbo positioning, where the estimation errors are reduced considerably by iterative updates.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.217-224
• /
• 2010

The purity methods to determine LOD/LOQ using standard deviation of the residual, intercept and blank by IUPAC and ACS describe many of the pitfalls and pose significant challenges to analytical chemists. Therefore, the aim of this study is the development of the simple, easy, convenient and statistically significant method to determine LOD in quantitative analysis of organic solvents by GC. The new approaching method by linearization in the given concentration range used coefficient of variation ; ${\sigma}_{n-1}$/S(standard deviation, ${\sigma}_{n-1}$ and average, S) of sensitivity(Response/concentration). The comparison of results among the purity methods(IUPAC and ACS) and the linearization have been fulfilled the F-test for standard deviations and t-test for LOD range values. The results of F-test and t-test are satisfied within 95 % confidence level, respectably. The LOD values determined by the new procedure are n-Hexane 0.0116 mg/$m^3$, Toluene 0.0807 mg/$m^3$, and o-Xylene 0.0494 mg/$m^3$. Because the standard deviation of the residual, intercept and blank and the slope of calibration curve are not calculated and the new approaching method use the coefficient of variation of sensitivity by linearization, this new method is simple, easy, convenient and statistically significant. In future, many chemical analysts will expect to applicate and routinely use this method in the all quantitative analysis.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2005

We propose an effective Landsat TM image compression method using the classified bidirectional prediction (CBP), the classified KLT and the SPIHT. The SPIHT is used to exploit the spatial redundancy of feature bands selected in the visible range and the infrared range separately. Regions of the prediction bands are classified into three classes in the wavelet domain, and then the CBP is performed to exploit the spectral redundancy. Residual bands that consist of difference values between the original band and the predicted band are decorrelated by the spectral KLT Finally, the three dimensional (3-D) SPIHT is used to encode the decorrelated coefficients. Experiment results show that the proposed method reconstructs higher quality Landsat TM image than conventional methods at the same bit rate.