• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.182-192
• /
• 2008

In oder to develop a decision supporting system for oil spill response, the prototype of pollution response support system which has integrated oil spill prediction system and pollution risk prediction system has developed for Incheon-Daesan area. Spill prediction system calculates oil spill aspects based on real-time wind data and real-time water flow and the residual volume of spilt oil and spread pattern are calculated considering the characteristic of spilt oil. In this study, real-time data is created from results of real-time meteorological forecasting model(National Institute of Environmental Research) using ftp, real-time tidal currents datasets are built using CHARRY(Current by Harmonic Response to the Reference Yardstick) model and real-time wind-driven currents are calculated applying the correlation function between wind and wind-driven currents. In order to model the feature which is spilt oil spreading according to real-time water flow is weathered, the decrease ratio by oil kinds was used. These real-time data and real-time prediction information have been integrated with ESI(Environmental Sensitivity Index) and response resources and then these are provided using GIS as a whole system to make the response strategy.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.59-71
• /
• 2023

Carbon capture, and storage (CCS) is important for the reduction of greenhouse gases and achieving carbon neutrality. CCS focuses on storing captured CO₂ permanently in underground reservoirs. CO₂-enhanced oil recovery (CO₂-EOR) is one form of CCS, where CO₂ is injected into the underground to enhance oil recovery. CO₂-EOR not only aids in the extraction of residual oil but also contributes to carbon neutrality by storing CO₂ underground continuously. CO₂-EOR can be classified into miscible and immiscible methods, with the CO₂-water alternating gas (CO₂-WAG) technique being a representative approach within the miscible method. In CO₂-WAG, water and CO₂ are alternately injected into the reservoir, enabling oil production and CO₂ storage. The WAG method allows for controlling the breakthrough of injection fluids, providing advantages in oil recovery. It also induces hysteresis in relative permeability during the injection and production process, expanding the amount of trapped CO₂. In this study, the effects of enhancing oil recovery and storing CO₂ underground during CO₂-EOR were presented. Additionally, cases of CO₂-EOR application in relation to CCS were introduced.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.39-47
• /
• 2018

Styrene-butadiene rubber (SBR) is widely used in tire treads due to its excellent abrasion resistance, braking performance, and reasonable cost. Depending on the polymerization method, SBR is classified into solution-polymerized SBR (SSBR) and emulsion-polymerized SBR (ESBR). ESBR is less expensive and environmentally friendlier than SSBR because it uses water as a solvent. A higher molecular weight is also easier to obtain in ESBR, which has advantages in mechanical properties and tire performance. In ESBR polymerization, a surfactant is added to create an emulsion system with a hydrophobic monomer in the water phase. However, some amount of surfactant remains in the ESBR during coagulation, making the polymer chains in micelles clump together. As a result, it is well-known that residual surfactant adversely affects the physical properties of silica-filled ESBR compounds. However, researches about the effect of residual surfactant on the physical properties of ESBR are lacking. Therefore, in this study we compared the effects of remaining surfactant in ESBR on the mechanical properties of silica-filled and carbon black-filled compounds. The crosslinking density and filler-rubber interaction are also analyzed by using the Flory-Rehner theory and Kraus equation. In addition, the effects of surfactant on the mechanical properties and crosslinking density are compared with the effects of TDAE oil (a conventional processing aid).

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.288-292
• /
• 1998

Thermooxidative stabilities of soybean oil, beef tallow and palm oil were studied during frying of steamed noodles. Steamed noodles were fried in $150^{\circ}C$ oils for 70 sec at the interval of 30 min. The frying oil was taken every 8 hrs for the analysis of peroxide value (PV) and free fatty acid (FFA) content, fatty acid composition, and tocopherol and tocotrienol content. A little change was shown in PV and FFA content in soybean oil during frying; on the other hand, rapid increase in beef tallow and palm oil was observed. Unsaturated fatty acid content was the highest in soybean oil, followed by palm oil and beef tallow. While fatty acid composition in soybean oil was not changed during frying, unsaturated fatty acid content decreased and saturated fatty acid increased in beef tallow and palm oil, which showed susceptibility to the oxidation. The ratio of linoleic acid to palmitic acid did not show difference with frying time in soybean oil: however, it decreased in other oils with a high correlation with frying time and higher decreasing rate in palm oil was observed. These suggested that soybean oil was the most stable to thermooxidation and the stability was followed by beef tallow and palm oil. Tocopherol was disappeared during frying and 87.5, 81.1, and 73.1% were remained in soybean oil after 8, 16 and 24 hour frying, respectively. Also the rate decreased in the order of ${\gamma}-,\;{\beta}-\;and\;{\alpha}-tocopherol$. However, 34.2 and 169.0 ppm tocopherol and tocotrienol which were present in control samples of beef tallow and palm oil were completely disappeared by 8 hr frying. Therefore, high thermooxidative stability of soybean oil resulted from higher residual amount of tocopherol during frying, and lower stability of palm oil than beef tallow was partly due to high degree of unsaturation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.13-20
• /
• 2013

In this study, oil palm biomass such as empty fruit bunch (EFP) and palm kernel shell (PKS) was used as raw materials for making pellets. EFB and PKS are valuable lignocellulosic biomass that can be used for various purposes. If EFB and PKS are used as alternative raw materials for making pellets instead of wood, wood could be saved for making pulps or other value-added products. In order to explore their combustion characteristics, EFB and PKS were analyzed using thermal gravimetric analyzer (TGA) with ultimate and proximate analyses. From the TGA results, thermal decomposition of EFB and PKS occurred in the range of 280 to $400^{\circ}C$ through devolatilization and combustion of fixed carbon. After $400^{\circ}C$, their combustion were stabilized with combustion of residual lignin and char. PKS contained more fixed carbons and less ash contents than EFB, which indicated that PKS could be more active in combustion than EFB.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.42-51
• /
• 2013

In this study, oil palm biomass such as empty fruit bunch (EFB) and palm kernel shell (PKS) was used as raw materials for making pellets. Hardwood sawdusts were also mixed with EFB and PKS for making pellets. For improving a bad forming behavior in a pelletizer, 1 to 3 per cent of corn starch based on oven-dried weight biomass was added. The starch contributed to the decrease of dust generation in addition to the improvement of forming capability during pellet forming. Heating values of every pellets made of EFB and PKS were higher than 4,300 kcal/kg for the first grade pellet, irrespective of addition of sawdusts. However, the pellets made of EFB and PKS had ash contents over 3 per cent, which made it impossible to be applied for home use. Instead, they could be applied for industrial use. For studying their combustion characteristics, the pellets from the mixtures of EFB, PKS and sawdusts were analyzed using thermal gravimetric analyzer (TGA). From the TGA results, thermal decomposition of EFB and PKS occurred following three including endothermic reaction and dehydration, devolatilization of the major chemical components, and finally combustion of residual lignin and char.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.466-470
• /
• 2015

In this study, Fenton oxidation was applied to railroad track ballasts contaminated with small amounts of oil. In order to perform the experiment on Fenton oxidation, petroleum contaminated ballast was collected from the railroad track and experiments on major factors of the remediation process were implemented in the laboratory. Then, the feasibility of insitu Fenton oxidation was investigated for the railroad track that was partially contaminated with oil. As a result, the residual TPH concentration of ballast was reduced to about 1,000 mg/kg-ballast in laboratory experiments using 0.1 mol Fe/L $H_2O_2$. Due to the drainage structure of the track bed, a considerable amount of $H_2O_2$ was released below the ballast without the sufficient reaction with the contaminated ballast; therefore, additional studies are necessary for the effective field application of Fenton oxidation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.947-956
• /
• 2009

Residual petroleum hydrocarbons after an oil spill may accumulate in the marine benthic ecosystem due to their high hydrophobicity. A lot of monitoring data are required for the estimation of ecosystem exposure to residual petrochemicals in an ecological risk assessment in the affected region. To save time and cost, the environmental exposure to them in the affected ecosystem can also be assessed using a simple food-web bioaccumulation model. In this study, we evaluated residual concentrations of four selected polycyclic aromatic hydrocarbons (phenanthrene, anthracene, pyrene, and benzo[a]pyrene) in a hypothetic benthic ecosystem composed of six species under two exposure scenarios. Body-residue concentration ranged 5~250 mg/kg body depending on trophic positions in an extreme scenario in which the aqueous concentrations of PAHs were assumed to be one-tenth of their aqueous solubility. In addition, bioconcentration factors (BCFs) and bioaccumulation factors (BAFs) were evaluated for model species. The logarithm of bioconcentration factor (log BCF) linearly increased with increasing the logarithm of 1-octanol-water partition coefficient (log $K_{OW}$) until log $K_{OW}$ of 7.0, followed by a gradual decrease with further increase in log $K_{OW}$ without metabolic degradation. Biomagnification became significant when log $K_{OW}$ of a pollutant exceeded 5.0 in the model ecosystem, indicating that investigation of food-web structure should be critical to predict biomagnifications in the affected ecosystem because log $K_{OW}$ values of many petrochemicals are higher than 5.0. Although further research is required for better site-specific evaluation of exposure, the model simulation can be used to estimate the level of the ecosystem exposure to residual oil contaminants at the screening level.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.606-613
• /
• 2016

The purpose of this study is to analyze the possibility of a residual product of coffee (RC). RC oil extracted with n-hexane at $60({\pm}10)^{\circ}C$ for 24 hours. In this study, the cytotoxicity of RC oil was observed against B16F10 melanoma cells and RAW 264.7 macrophage cells by water solubletetrazolium salt-1 assay, and The RC oil measured by methods of DPPH radical scavenging and antimicrobial activities in Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Candida albicans. As a result, the RC oil treatment-related cytotoxic effects appeared on B16F10 melanoma cells from 0.125 to $2{\mu}{\ell}/m{\ell}$ and RAW 264.7 macrophage cells from 0.125 to $0.5{\mu}{\ell}/m{\ell}$ concentrations in this study. RC oil is radical scavenging activity concentrations on dependent. The antimicrobial activity of RC oil ($150{\mu}l/{\ell}$) was determined by clear zone method. Straphylococcus epidermidis, Straphylococcus aureus, Escherichia coli, Candida albicans showed clear zone by each $11.3{\pm}0.4$, $12.{\pm}0.7$, $12.0{\pm}0.0$, $0.0{\pm}0.0mm$. It is suggested that RC oil have effects on the cytotoxicity, antioxidant and antimicrobial that could be applicable to cosmetics as a new material.

• Journal of agricultural medicine and community health
• /
• v.31 no.1
• /
• pp.63-79
• /
• 2006

Korea's self-sufficient food ratio on a quantity basis remained a low 27.6 per cent for cereals in year 2004. Even the public auction of imported rice from the United States kicked off a couple of days ago to allow foreign rice to be sold directly to consumers on the Korea market for the first time. Therefore the safety of imported food must be a great concern of Korean consumers. All imported agricultural products are supposed to be quarantined for controlling the insect and inspected for the potent risk like residual pesticides, aflatoxin, sulfur dioxide and genetically modified. agricultural products. The 12 percent of agricultural products contained the insects detected by National Plant Quarantine was fumigated with methyl bromide or aluminum phosphide and entered the custom. The most large portion of violated agricultural products (24 cases in 2004) inspected by Korea Food and Drug Administration was dried herbal medicinal foods contaminated by sulfur dioxide which must be treated when they were dried in China. The second factor made the imported agricultural products to be criminals (19 cases in 2004) was residual pesticides. Genetically modified agricultural products like soybean and corn are under control by labelling in Korea. Genetically modified soybean and corn have been used for oil expression mostly. It is the time to set up realistic risk assessment system for our consumer with the pouring imported agricultural products.