• Earthquakes and Structures
• /
• 제1권4호
• /
• pp.327-344
• /
• 2010

This paper summarizes results of a comprehensive analytical study aimed at evaluating the influence of strong ground motion duration on residual displacement demands of single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems. For that purpose, two sets of 20 earthquake ground motions representative of short-duration and long-duration records were considered in this investigation. While the influence of strong ground motion duration was evaluated through constant-strength residual displacement ratios, $C_r$, computed from the nonlinear response of elastoplastic SDOF systems, its effect on the amplitude and height-wise distribution of residual drift demands in MDOF systems was studied from the response of three one-bay two-dimensional generic frame models. In this investigation, an inelastic ground motion intensity measure was employed to scale each record, which allowed reducing the record-to-record variability in the estimation of residual drift demands. From the results obtained in this study, it was found that long strong-motion duration records might trigger larger median $C_r$ ratios for SDOF systems having short-to-medium period of vibration than short strong-motion duration records. However, taking into account the large record-to-record variability of $C_r$, it was found that strong motion duration might not be statistically significant for most of the combinations of period of vibration and levels of lateral strength considered in this study. In addition, strong motion duration does not have a significant influence on the amplitude of peak residual drift demands in MDOF systems, but records having long strong-motion duration tend to increase residual drift demands in the upper stories of long-period generic frames.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.308-313
• /
• 2012

Robust tuning rules of the motion profile are proposed to minimize the residual vibration. For asymmetric S-curve profile, tuning rules are analytically formulated using Laplace-domain approach. When the system modeling is known exactly, by placing a single zero of the motion profile on the pole of the system, the residual vibration can be perfectly eliminated under undamped system. However, if there are some amounts of the modeling errors, the residual vibration significantly increases. To track this issue, the robust tuning rules against modeling error are discussed. One of the proposed robust tuning rules is placing the multiple zeros of the motion profile on the pole of the system, and the other is placing the zeros of the motion profile around the pole of the system. Thanks to the proposed robust tuning rules, motion profile becomes more robust to modeling errors while minimizing the residual vibration. By simulation, the effectiveness of the proposed robust tuning rules is verified.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.96-108
• /
• 1996

In this paper, we propose an object-oriented coding method in low bit-rate channels using block-based motion vectors and residual image compensation. First, we use a 2-stage algorithm for estimating motion parameters. In the first stage, coarse motion parameters are estimated by fitting block-based motion vectors and in the second stage, the estimated motion parametes are refined by the gradient method using an image reconstructed by motion vectors detected in the first stage. Local error of a 6-parameter model is compensted by blockwise motion parameter correction using residual image. Finally, model failure (MF) region is reconstructed by a fractal mapping method. Computer simulation resutls show that the proposed method gives better performance than the conventional ones in terms of th epeak signal to noise ratio (PSNR) and compression ratio (CR).

• 한국의학물리학회지:의학물리
• /
• 제23권3호
• /
• pp.145-153
• /
• 2012

본 연구에서는 호흡에 의한 표적의 움직임 모사가 가능한 팬톰을 이용, 나선형 4DCT 영상에서 발생되는 위상 내 모션 아티팩트(residual motion artifact)의 경향을 분석했으며, 그 특성 및 원인 분석을 위한 이론적 모델을 제시하였다. 표적의 움직임은 SI 방향의 1차원 사인파형을 적용하였으며, 주기는 4s로 고정, 진폭은 10, 20, 30 mm로 변화를 주었다. 표적의 움직임과 동조를 이루는 호흡신호를 얻은 후 이를 기반으로 최대흡기(Inhale peak, 0%)로부터 10% 위상간격(phase bin)으로 재분류하여 총 10개의 4DCT 영상을 재구성하였다. 각각의 진폭(10, 20, 30 mm)별로 획득된 총 30 사례의 영상은 RTP 시스템(CorePLAN, SC&J)에서 분석을 수행하였으며, 경계설정 시 오류를 줄이기 위해 contour window를 고정 값으로 설정한 후 SI 방향의 표적 지름변화를 측정하여 왜곡 정도를 평가 하였다. 각 위상 별 표적의 지름 변화를 측정한 결과 일정한 변화 경향을 확인할 수 있었다. 3 사례(10, 20, 30 mm) 모두 50% 위상(phase) 영상에서 비교적 작은 지름 변화가 관찰 되었는데 10 mm 진폭에서는 정지 영상 대비 변화가 없었고, 20 mm 진폭에서는 0.1 cm (5%)의 변화, 30 mm 진폭에서는 0.1 cm (5%) 변화를 확인할 수 있었다. 반면 30% 위상(phase) 또는 80% 위상 영상에서는 다른 위상 영상에 비해 표적 지름의 변화가 비교적 크게 나타남을 확인할 수 있었다. 10 mm 진폭에서는 정지 영상대비 최대 0.2 cm (10%) 지름 변화가 나타났고 20 mm 진폭에서는 최대 0.7 cm (35%)의 변화, 30 mm 진폭에서는 최대 0.9 cm (45%)의 지름 변화가 나타났다. 이상의 실측결과를 이론모델의 시뮬레이션 결과와 비교해 봤을 때 변화의 양적인 측면에서는 다소 차이가 발생되었지만 변화의 경향성을 확인하는 측면에서는 의미 있는 결과를 얻을 수 있었다. 본 연구의 결과를 통해 규칙적인 1차원 표적 움직임(sine motion)이 적용된 나선형 4DCT 영상에서도 위상 내 움직임에 의한 표적 지름변화가 발생될 수 있음을 확인했고 각 위상(phase)에서의 영상왜곡 정도가 위상 내 움직임의 속도에 비례함을 증명할 수 있었다. 또한 이상의 실측 결과를 이론모델에 적용하여 분석함으로써 위상 내 모션 아티팩트(residual motion artifact)의 발생원인 및 경향성 분석에 직관적 이해를 도울 수 있었고 이론모델에 기초한 분석 프로그램을 개발하여 특정 CT 파라미터(parameter) 상에서 영상왜곡을 줄이기 위한 최적의 위상(phase) 선택에 도움을 줄 수 있었다.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.35-42
• /
• 2000

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying intertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the LMI approach and simultaneous optimization design method to design the anti-swing motion control system for the controlled plant. And the simulation result shows that the proposed control strategy is shown to be robust to disturbances like winds and initial sway motion.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3033-3045
• /
• 1996

In this paper, we propse an object-oriented coding method in low bit-rate channels using pyramid structure and residual image compensation. In the motion estimation step, global motion is estimated using a set of multiresolution images constructed in a pyramid structure. We split an input image into two regions based on the gradient value. Regions with larte motions obtain observation points at low resolution level to guarantee robustness to noise and to satisfy a motion constraint equation whereas regions with local motions such as eye, and lips get observation points at the original resolution level. Local motion variations and intesity variations of an image reconstructed by the golbal motion are compensated additionally by using the previous residual image component. Finally, the model failure (MF) region is compensated by the pyramid mapping of the previous displaced frame difference (DFD). Computer simulation results show that the proposed method gives better performance that the convnetional one in terms of the peak signal to noise ratio (PSNR), compression ratio (CR), and computational complexity.

• 로봇학회논문지
• /
• 제12권3호
• /
• pp.279-286
• /
• 2017

In this paper, we proposed a method to determine the acceleration/deceleration time of the motion for reducing the residual vibration caused by the resonance of the robot in the high-speed motion. The relationship between the acceleration/deceleration time and the residual vibration was discussed for the trapezoidal velocity profile by analyzing the time when the jerk happens. The natural frequency of the robot can be estimated in advance through the dynamics simulation. The simulation and experiment for both cases where the moving distance of the robot is long enough and the distance is short, are implemented in the 1-DOF linear robot. Simulation and experimental results show that when the acceleration/deceleration time is a multiple of the vibration period, the settling time and the amplitude of the residual vibration become less than when the time is not a multiple.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.126-137
• /
• 1993

This paper presents an efficient method for the identification of motion error sources in NC machine tools by making use of the circular interpolation test, which is often used in estimating the motion accuracy of NC machine tools. Mathematical formulae are described for motion errors due to various kinds of error sources. Two identification formulae are proposed: one is based on the frequency analysis and the other is formulated with the weithted residual method. Motion error signal is classified into two patterns, mean errors(mean of CW and CCW test signals from mean errors). The sources of the mean errors are identified by using the frequency analysis technique and the sources of the deviation errors by the weighted residual formulaltion. A menu driven, user oriented, computer program is written to realize the full steps of the proposed identificationprocedure. Then, the identification method is applied to two NC machine tools.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.22.1-22.1
• /
• 2011

Two dominant components of polar motion are the Chandler and the annual components. Recently, the existence of 500-day period component in the Earth's polar motion has been manifested. But its existence is not clear on Fourier spectrum. One cause of difficulty involved here is that the amplitudes of the two main components are slightly variable in time by certain amounts (Chandler: 0.15~0.28 arcsec, annual: 0.09~0.15 arcsec). A residual polar motion time series excluding the two main components for a time span between 1962 Jan and 2010 Nov from IERS C04 time series dataset was constructed by least square fitting. For faithful fitting, 43 time segments of 6.8 year length (each starts on January 1st of successive years) were separately acquired and later combined together. The period of dominant peak in the spectrum of this residual polar motion time series is 490 days. Next peaks have their periods as semi-annual, 300~330 days, ~560 days, 670 days, and 1360 days.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권6호
• /
• pp.512-522
• /
• 2005

본 논문에서는 이음매없는 모자이크 구성을 위한 영상 정렬 방법을 제안한다. 모자이크 구성을 위한 전역 움직임 추정 후, 전역 움직임 계수를 이용하여 모자이크를 구성하려면, 정렬이 올바르게 수행되지 않은 국부 영역이 존재하게 되고, 이러한 국부 영역에서는 선분의 끊김, 흐려짐, 겹침 현상이 일어난다. 전역 움직임 계수에 의해서 정렬되지 않은 국부 영역을 정렬하기 위해서는 잔여 움직임 추정 알고리즘이 필요하다. 그러나, 잔여 움직임 추정을 위해서는 카메라의 초점 거리나 조도 변화와 관계된 변수를 추정해야 하고, 또한 이에따른 많은 계산량을 요구하게 된다. 이러한 문제점을 해결하기 위해서, 본 논문에서는 추가적인 외부 변수의 추정 과정 없이 효율적으로 잔여 움직임을 추정할 수 있는 알고리즘을 제안한다. 제안된 방법에서는 잔여 움직임 추정 과정에서 사용되는 측정 및 추정 윈도우의 크기를 효율적으로 설정함으로써 잔여 움직임 정보를 효과적으로 추정할 수 있다. 제안된 단계적 잔여 움직임 알고리즘을 적용하여 모자이크를 구성함으로써, 전역 움직임 계수에 의해서 정렬되지 않았던 국부 영역의 흐려짐, 겹침 현상을 해결할 수 있음을 실험적으로 확인하였다.