• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.110-115
• /
• 2002

The tunnels built in recent years are equipped with traffic counters and pollution sensors (mostly, CO and Vl sensors). Utilizing these built-in sensors, it is possible to develop an algorithm to estimate the amount of pollutants exhausted from the each class of cars passing through the tunnel. These estimated data can be effectively utilized not only for ventilation control but also for designing ventilation facilities. The diffusion of pollutants in a tunnel can be described with one-dimensional diffusion-convection equation. This equation is approximated with interpolation functions and weighted residual method converting to adequate form for standard state estimate algorithms. With this converted equations, a least square optimization based algorithm is developed, whose outputs are the estimated amounts of pollutants emitted from each class of cars. In order to verify the feasibility of the developed algorithms, simulations are performed with the real data acquisitioned from the Tunnae tunnel located in Young-Dong highway in Korea.

• Journal of Conservation Science
• /
• v.5 no.1 s.5
• /
• pp.94-104
• /
• 1996

This study was carried on paper mulberry bast fibers, which were cut in the length of it's chip by three kinds. And they cooked by sodium hydroxide (NaOH) and ammonium oxalate (AMOX), and pulping process was studied to inquire some properties of hand made papers. The results were as follows. AMOX pulps had $10\~17\%$ higher than NaOH, but amounts of the residual lignin of it's pulps and residual ash were high, and it surely can't be superior. In the freeness of pulps, AMOX pulps were higher than that of NaOH, but they showed tendency to opposite in view of relation of chip's length kinds. For the AMOX pulps, the physical characteristics test results were higher long fiber pulps than short fiber pulps. Specially, in folding endurance long fiber pulps were a very strong. NaOH pulp's physical characteristics test had shown results that were opposite of there of the AMOX pulps, if the length of the fiber is longer, the strengthts generally decreased. To get the optimum fiber's length according to use of paper and pulping method, they must be fractionate chip's length. The long fibers in NaOH pulps affected the paper quality greatly to length of chips.

• Journal of Chest Surgery
• /
• v.14 no.3
• /
• pp.187-194
• /
• 1981

Cardiac surgery is generally followed by a period of routine ventilator support. When the patient seems hemodynamically stable and relatively alert following surgery, respiratory adequacy is tested by the weaning trial. In this study, physiological and clinical prediction of postoperative respiratory adequacy, including values of pulmonary function tests, were examined in an attempt to identity those few variables which predicted the outcome of the ventilator weaning trial following surgery. Our series comprised 27 patients who underwent elective open intracardiac operations at the Department of Thoracic and Cardiovascular Surgery, School of Medicine, Kyungpook National University, from October 1979 to July, 1980. The pulmonary function tests performed on all patients included the following; forced vital capacity [FVC], forced expiratory volume [FEV1.0], forced expiratory flow [FEF 25--75~], residual volume [RV], and functional residual capacity [FRC], measured with a helium dilution technique. Of our 27 patients, 8 were successfully weaned within 20 hours of operation. All patients with cyanotic heart diseases or acquired heart diseases were unsuccessfully weaned. The bypass time in the successful weaning group was shorter in the mean value [82.8 minutes]than in the unsuccessful weaning group [120.5 minutes]. There was a relatively significant difference in the mean values for the two groups in arterial pressure, bleeding amounts and FiO2 among the postoperative monitoring variables, and in forced vital capacity [FVC]. The postoperative clinical assessments appeared vague but corresponded reasonably well to appraisal of success in weaning, especially in variables of cough and self-respiration efforts.

• Smart Media Journal
• /
• v.7 no.3
• /
• pp.9-15
• /
• 2018

This paper proposes an optimal gain modification method of the Multichannel Wiener filter (MWF) using speech presence probabilities. Conventional gain modification methods of MWFs have the problem of the increase of speech distortions while reducing residual noises with its relative heuristic approach. However, the proposed optimal gain modification method, derived by solving the unconstrained minimization problem of the probability-involved cost function, reduces amounts of residual noises and signal distortions simultaneously. Through an evaluation of the filtered waveforms and spectrograms, it is verified that the proposed method results in an improved SNR with less signal distortions compared to the conventional MWF.

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.49-57
• /
• 2011

Water budget analysis in the groundwater system was conducted in order to understand water budget distributions in the ground water system in Geum-gang watershed. The annual amounts of precipitation, runoff, evapotranspiration, dam storage change and water supply over the sub-watershed in Geum-gang watershed were evaluated the residual groundwater from 2002 to 2006, based on the water budget considering inflow and outflow. Then we are able to expect residual groundwater of each sub-basin. According to the result of study, the year 2003 and 2006 were recorded the highest and the lowest precipitation value, respectively. Average run-off percentage against precipitation was 60.44%. Annual evapotranspiration in each of years didn't show the remarkable variations but the values were high in the lower reaches of the basin. The residual waters in Geum-gang basin were determined to be 133.36 in 2002, 77.64 in 2003, -19.40 in 2004, -82.25 in 2005 and -128.07 mm in 2006. The residual water in Geum-gang basin was high in the main and up stream such as Maepo. Also the residual water showed low distributions in Nonsan and Seokhwa.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1665-1671
• /
• 2012

This study was conducted to assess the removal of residual pesticides and to obtain high amounts of quercetin in onion peel extracts (OPEs) by 4 washing treatments. Washing is one of the standard processing steps in obtaining functional food ingredients from onion peel. After a first detergent wash (0.2% w/v) (DW) and hot air drying ($80^{\circ}C$, 24 hr) (B), 4 washing treatments were tested, including a second DW (C), ultrasonication ($50^{\circ}C$, 10 min) plus DW (D), 0.3% $H_2O_2$ (v/v) plus DW (E), and blanching ($95-97^{\circ}C$, 2 min) plus DW (F). This was followed by 60% (v/v) ethanol extraction and vacuum freeze drying of the OPE. The E treatment yielded 89.04% OPE and a quercetin content of 96.84% in the OPE compared with the B treatment, and had the highest efficiency of all treatments tested. The OPE was tested for the presence of 177 residual pesticides and three compounds were detected in all treatments: cyhalothirn, fluquinconazole and procymidone. Cyhalothirn and fluquinconazole levels were below the permitted levels for fresh onion, while procymidone was present in the high level range of 128.01~133.46 mg/kg in all samples. The E treatment was a better washing method than the others for removal of residual pesticides. It could reduce the level of residual pesticides without changing the functional properties of the OPE.

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.596-610
• /
• 2007

In order to reduce the complexity of SVC encoding, we introduce a fast mode decision method in the enhancement layers of spatial scalability by selectively performing the inter-layer residual prediction of SVC. The Inter-layer residual prediction coding in Scalable Video Coding has a large advantage of enhancing the coding efficiency since it utilizes the correlation between two residuals from a lower spatial layer and its next higher spatial layer. However, this entails the dramatical increase in the complexity of SVC encoders. The proposed method is to analyze the characteristics of integer transform coefficients for the subtracted signal for two residuals from lower and upper spatial layers. Then it selectively performs the inter-layer residual prediction coding and rate-distortion optimizations in the upper spatial enhancement layer if the SAD values of residuals exceed adaptive threshold values. Therefore, by classifying the residuals according to the properties of integer-transform coefficients only with SAD of residuals between two layers, the SVC encoder can perform the inter-layer residual coding selectively, thus significantly reducing the total required encoding time. The proposed method results in reduction of the total encoding time with 51.5% in average while maintaining the RD performance with negligible amounts of quality degradation.

• Analytical Science and Technology
• /
• v.9 no.2
• /
• pp.123-133
• /
• 1996

The optimum conditions for the analysis of the difenoconazole fungicide on soil and crops were investigated and the residues of that in apple and soil were identified by using the gas chromatography. The extract with acetonitrile was separated with saturated NaCl and n-hexane solution after filtered, and concentrated. Obtained fungicide residues were transfered to the florisil column and eluted with acetone and n-hexane mixed solution for the analysis by GLC(ECD). From the standard addition experiments with 0.20 and 1.0ppm, the average recoveries were 86~92% and the detection limit was 0.01 ppm. It seems to be safely used when difenoconazole is treated three times until 15 days before harvest of apple. In this case residual amounts of difenoconazole in apple was from 0.037ppm to 0.044ppm. The soil samples extracted with methanol and ammonium hydroxide mixed solution were partitioned with dichloromethane and saturated sodium chloride solution. The organic phase was concentrated and redissolved with toluene and analyzed with GLC(FID) after cleaned with Sep-Pak column. From the standard addition experiments with 0.10, 0.50 and 1.0ppm, the average recoveries were 101.2~103.7% and the detection limit was 0.025ppm.

• Steel and Composite Structures
• /
• v.21 no.4
• /
• pp.863-882
• /
• 2016

This study aims to introduce a new bracing system by which even super-wide frames with large openings can be braced. The proposed system, hereafter called Cable-Pulley Brace (CPB), is a tension-only bracing system with a rectilinear configuration. In CPB, a wire rope passes through a rectilinear path around the opening(s) and connects the lower corner of the frame to its opposite upper one. CPB is a secondary load resisting system with a nonlinear-elastic hysteretic behavior due to its initial pre-tension load. As a result, the required energy dissipation would be provided by the MRF itself, and the main intention of using CPB is to contribute to the initial and post-yield stiffness of the whole system. Using a stiffness calibration technique, optimum placement of the CPBs is discussed to yield a uniform displacement demand along the height of the structure. A displacement-based design procedure is proposed by which the MRF with CPB can be designed to achieve a uniform distribution of inter-story drifts with predefined values. Obtained results indicated that CPB leads to significant reductions in maximum and residual deformations of the MRF at the expense of minor increase in the maximum base shear and developed axial force demands in the columns. In the case of a typical 5-story residential building, compared to SMRF system, CPB system reduces maximum amounts of inter-story and residual drifts by 35% and 70%, respectively. Moreover, openings of the frame are not interrupted by the CPB. This is the most appealing feature of the proposed bracing system from architectural point of view.