• Korean Journal of Environmental Agriculture
• /
• v.34 no.3
• /
• pp.223-229
• /
• 2015

BACKGROUND: It is important to understand residual patterns of pesticides applied on crops for ensuring their safety in agricultural products. However, there are few studies on the residual patterns of pesticides in minor crops, which are small in cultivation area. In this study, residual amounts of bifenthrin and chlorfenapyr sprayed on perilla leaf as a minor crop were investigated to know their residual patterns. METHODS AND RESULTS: Bifenthrin and chlorfenapyr were sprayed 2 or 3 times on perilla leaves at a week interval prior to harvest, and the perilla leaves were collected at 0, 1, 3, 5 and 7 days after the final application of pesticides. Recoveries for residual analysis of pesticides spiked on perilla leaves with concentrations of 0.1 and 0.5 mg/kg were 81.9-104.8%. The residual amounts of pesticides interpreted using first order kinetics model show that dissipation constants of bifenthrin and chlorfenapyr in perilla leaves were 0.0724-0.0535 and $0.0948-0.0821day^{-1}$, respectively. In addition, the dissipation half-lives in perilla leaves were 9.6-12.9 days for bifenthrin and 7.3-8.4 days for chlorfenapyr. When pre-harvest residue limits (PHRL) of bifenthrin and chlorfenapyr at 10 days before harvest calculated on the basis of the dissipation constants and maximum residue limits of the pesticides were calculated as 17.1 for bifenthrin and 15.9 mg/kg for chlorfenapyr. CONCLUSION: Therefore, the PHRL calculated using the time-dependant residual patterns of pesticides in perilla leaves and their regression analysis may be used as experimental evidences in order to ensure the safety of pesticides in perilla leaves before harvest.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.308-313
• /
• 2012

Robust tuning rules of the motion profile are proposed to minimize the residual vibration. For asymmetric S-curve profile, tuning rules are analytically formulated using Laplace-domain approach. When the system modeling is known exactly, by placing a single zero of the motion profile on the pole of the system, the residual vibration can be perfectly eliminated under undamped system. However, if there are some amounts of the modeling errors, the residual vibration significantly increases. To track this issue, the robust tuning rules against modeling error are discussed. One of the proposed robust tuning rules is placing the multiple zeros of the motion profile on the pole of the system, and the other is placing the zeros of the motion profile around the pole of the system. Thanks to the proposed robust tuning rules, motion profile becomes more robust to modeling errors while minimizing the residual vibration. By simulation, the effectiveness of the proposed robust tuning rules is verified.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.31-39
• /
• 2003

The enzymatic isolation of residual lignins obtained from spruce and beech pulps (obtained by sulfite, kraft, ASAM and soda/AQ/MeOH pulping processes) and their characterization was described in previous publications. Here, the residual lignins have been submitted to potassium permanganate oxidation (KMnO₄ degradation), and 9 aromatic carboxylic acids (3 of them are dimeric) were identified after methylation with diazomethane by GC/MS. The analytical challenge during qantification by the internal standard methods was the partly high protein content of the samples, which resulted in elevated anisic acid yields in the degradation mixture of sulfite residual lignins. The results are compared with the KMnO₄ degradation of the corresponding MWLs and discussed in terms of S/G ratios and degrees of condensation. The latter was calculated as a quotient between the aromatic carboxylic acids derived from condensed and non-condensed lignin structures. Typical degradation patterns for the various processes have been observed. Among other parameter, the relative compositions between iso-hemipinic acid (which is for condensation in pos. 5 of the aromatic ring) and meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (both are for condensation in pos. 6 of the aromatic ring) was found to be process specific. Kraft and soda/AQ/MeOH residual lignins yielded higher amounts of iso-hemipinic acid. In contrast, the relative yields of meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (the latter in beech lignins) are higher in sulfite and particularly in ASAM residual lignin. In case of beech residual lignins the amount of acids originated from non-condensed syringyl type lignin units was surprisingly high. The condensation degree of residual lignins was shown to be generally higher than that of MWLs. This was especially true for the G units. ASAM residual lignin exhibited very high S/G ratios and degrees of polymerization. Causality between condensation degree and total yield of degradation products was demonstrated.

• Journal of Food Hygiene and Safety
• /
• v.8 no.3
• /
• pp.147-150
• /
• 1993

A novel rapid and sensitive method to detennine residual oxolinic acid in Acetes japonicus was developed. The residual oxolinic acid was extracted with ethylacetate and diluted oxalic acid, and interfering substances were removed by hexane. Fifty ppb residual concentration in the extract could be quantitated by UV-HPLC and the recovery rates were 79-91% according to the fortified amounts.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1105-1111
• /
• 2010

In order to determine the potential for reduction of nitrite levels and ripening period with heat treatment, the effects of ripening period (1-13 days), nitrite level (45-195 ppm), and heat treatment (30-$90^{\circ}C$) on lipolysis, peroxide, TBA, proteolysis, and residual nitrite values of sucuk were investigated using response surface methodology. The ripening period significantly (p<0.01) increased lipolysis, peroxide, TBA, and proteolysis values and decreased residual nitrite values. The effects of additional nitrite levels were found to significantly affect peroxide and residual nitrite values. Significant amounts of the additional nitrite levels were reduced during processing and on the first day of ripening periods.

• YAKHAK HOEJI
• /
• v.18 no.1
• /
• pp.29-38
• /
• 1974

In order to study the residual amounts of absorbed organochlorine pasticides in vegetables, heptachlor and endrin were sprayed 2,4 and 6kg per 10a., respectively, before sowing the seeds in the station. The experiemental study is primarily concerned with the absorption in lettuce nad garland chrysanthemum. The absorption of each pesticide into lettuce and garland chrysanthemum, and residual pesticides in soil by timne have been analyzed by the gas chromtographic method, and the ratio of residual pesticides in vegetablesand soil were estimated. Heptachlor, heptachlor epoxide and endrin in lettuce nad garland chrysanthemum at the market in Seoul area hvae also analyzed and found extremely low level of pesticides in comparison with the level in above experimental vegetables as well as same vegetables in Japan.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.271-285
• /
• 2006

A two-dimensional photochemical transport model (2D PTM) is simulated to describe the transport and chemical reaction of ozone related to aerosols in the troposphere and stratosphere. The vertical profiles and total amounts of ozone, which are advected by both residual Eulerian circulation and the adiabatic circulation under certain circumstance, have been compared with the observation data such as ozonesondes, Brewer spectrometer, the Upper Atmosphere Research Satellite (UARS), and the Total Ozone Mapping Spectrophotometer (TOMS). As a result, we find that the observed distribution of ozone Is adequately reproduced in the model at middle and high latitude in the Northern Hemisphere as well as at Phang ($36^{\circ}\;02'N,\;129^{\circ}\;23'E$) in South Korea. In particular, the 2D PTM is well simulated in the ozone decrease due to the Pinatubo volcanic eruption in 1991. However, ozone mixing ratio are more underestimated than those of UARS and ozonesondes, because are very sensitive to the latitude of transport across the tropopause associated with both Rummukainen errors and off-line model. Relative mean bias errors and relative root mean square errors of ozone calculations using the 2D PTM are shown within${\pm}10%$, respectively.

• Korean Journal of Remote Sensing
• /
• v.33 no.4
• /
• pp.445-454
• /
• 2017

The performance of spatial downscaling models depends on the quality of input coarse scale products. Thus, the impact of intrinsic errors contained in coarse scale satellite products on predictive performance should be properly assessed in parallel with the development of advanced downscaling models. Such an assessment is the main objective of this paper. Based on a synthetic satellite precipitation product at a coarse scale generated from rain gauge data, two synthetic precipitation products with different amounts of error were generated and used as inputs for spatial downscaling. Geographically weighted regression, which typically has very high explanatory power, was selected as the trend component estimation model, and area-to-point kriging was applied for residual correction in the spatial downscaling experiment. When errors in the coarse scale product were greater, the trend component estimates were much more susceptible to errors. But residual correction could reduce the impact of the erroneous trend component estimates, which improved the predictive performance. However, residual correction could not improve predictive performance significantly when substantial errors were contained in the input coarse scale data. Therefore, the development of advanced spatial downscaling models should be focused on correction of intrinsic errors in the coarse scale satellite product if a priori error information could be available, rather than on the application of advanced regression models with high explanatory power.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.313-324
• /
• 2011

Several complaints from consumers on red or turbid waters were often filed at the same places although various efforts were made to improve water quality in the drinking water plant. The red water problems were occurred due to corrosion of main water pipe, especially at extremity. The low concentrations of chlorine indicating poor water quality were detected at the problematic location. To solve the poor water quality at the extremity, flushing techniques, i.e., conventional flushing, unidirectional flushing, and continuous flushing, were recently practiced. In this study, effects of conventional flushing on water qualities were examined by comparing turbidity and residual chlorine before and after flushing. In addition, more detailed analyses on water qualities at the tap water were conducted to learn a reduction pattern during flushing. Five items from geographic information system of water distribution were used to obtain a relationship with water quality, washing duration or amounts of washing water. The flushing was effective to meet the National Drinking Water Quality Standard with simple and relatively short time operation. The key operational parameter in flushing was amounts of washing water which should be estimated based on water quality of the consumer's tap water. The positive relationship between the residual chlorine and pipe length implied that detention time in the pipeline was the main cause of the complaints. More experiments on effectiveness of flushing are needed to determine reasonable strategies of flushing.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.84-91
• /
• 2013

PURPOSE. The aim of this study was to evaluate the stability of arginine-glycine-aspartic acid (RGD) peptide coatings on implants by measuring the amount of peptide remaining after installation. MATERIALS AND METHODS. Fluorescent isothiocyanate (FITC)-fixed RGD peptide was coated onto anodized titanium implants (width 4 mm, length 10 mm) using a physical adsorption method (P) or a chemical grafting method (C). Solid Rigid Polyurethane Foam (SRPF) was classified as either hard bone (H) or soft bone (S) according to its density. Two pieces of artificial bone were fixed in a customized jig, and coated implants were installed at the center of the boundary between two pieces of artificial bone. The test groups were classified as: P-H, P-S, C-H, or C-S. After each installation, implants were removed from the SRPF, and the residual amounts and rates of RGD peptide in implants were measured by fluorescence spectrometry. The Kruskal-Wallis test was used for the statistical analysis (${\alpha}$=0.05). RESULTS. Peptide-coating was identified by fluorescence microscopy and XPS. Total coating amount was higher for physical adsorption than chemical grafting. The residual rate of peptide was significantly larger in the P-S group than in the other three groups (P<.05). CONCLUSION. The result of this study suggests that coating doses depend on coating method. Residual amounts of RGD peptide were greater for the physical adsorption method than the chemical grafting method.