• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.557-568
• /
• 2013

In this study, Calculated the nonpoint sources(NPS) load per unit area about various rainy events in vineyard of Nakdong River basin. NPS monitoring and calculation for NPS load per unit area were estimated from 'Investigation method of precipitation discharge(National Institute of Environmental Research, 2007)'. The evaluation of applicability for NPS load per unit by compared with prior research data and Total Maximum Daily Load(TMDL) data. Five target areas were each $2000m^2$, $1800m^2$, $1943m^2$, $2484m^2$, $864m^2$ and located in Gyeongsangbukdo Gyeongju, Gyeongsangbukdo Sangju, Gyeongsangnamdo Hapcheon in Korea. Since fruits were the only crop on the target area, the characteristics of stormwater discharge at survey sites could be evaluated independently. A total of 115 rainfall events in the Orchard area during five years(2008-2012) was surveyed, and 38 of them became stormwater discharge. In the Nakdong River watershed, average of event mean concentrations(EMCs) in Orchard area for biochemical oxyzen demand(BOD), Chemical oxyzen demand(COD), total nitrogen(T-N), total phosphorus(T-P) were 2.0mg/L, 10.1mg/L, 3.195mg/L, 0.578mg/L, respectively. NPS load per unit area in Orchard area showed BOD : $2.0kg/km^2{\cdot}day$, COD : $10.2kg/km^2{\cdot}day$, T-N : $3.220kg/km^2{\cdot}day$, T-P : $0.606kg/km^2{\cdot}day$.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.137-144
• /
• 2016

In modular architecture, manufacturing drawing which includes whole information for modular unit production is essential since works for modular unit have to be performed in manufacturing factory not construction field. Although the manufacturing drawing is important as known it is insufficient to utilize the manufacturing drawing in modular architecture project and this makes modular unit low-quality with re-work and work time delay. To prevent low-quality modular unit caused by insufficient manufacturing drawing, in this research firstly manufacturing drawing's current situation and error cases in manufacturing phase of past modular housing project were analyzed, and correlation between reduction of errors occurance frequency and improving manufacturing drawing was verified. Secondly manufacturing drawing improvement factors were deducted in interior, furniture, mechanical work phase which errors' occurance rate is high and the way of deducting manufacturing drawing lists and contents were suggested with light-weight work as an example in case of new type of errors occurance. A series of research process can contribute to good-quality modular unit by errors reduction. As a result of research, about half of errors occurance can be reduced with suggested manufacturing drawing improvement factors. And the manufacturing drawing process can contribute to modular production which have uniform quality.

• Journal of the Korean housing association
• /
• v.23 no.4
• /
• pp.49-57
• /
• 2012

This study was conducted to apply the modular construction method to Han-ok. The modular method, which is differentiated from the existing one, means a construction method that equipments, windows and interior materials are prefabricated as a six-sided object at a plant and then they are assembled at the least process on the spot. As for the theoretical observation, the theoretical basis to apply the modular method to the modular housing and Hanok was divided into environmental and economic aspect. In order to apply the modular method to Hanok, the unit scale and size were selected and the plane of unit module Hanok was developed. And a standard with regard to the unit combination and material lifting transportation method was set and planned. In addition, through the comparison the unit modular Hanok to the existing Hanok, the difference was analyzed and the strength was identified in terms fo design method, structure, construction method, period and cost. In final, the conclusion, with regard to the economic, technical application in future, was drawn through arranging the study contents. The unit modular Hanok to carry out the high-quality dwelling through construction period reduction, standardized construction materials and improved insulation performance can meet the demands for a paradigm of new construction technology.

• East Asian mathematical journal
• /
• v.39 no.1
• /
• pp.11-21
• /
• 2023

Non-trivial automorphisms of the unit disc in the complex plane can be classified by three classes; elliptic, parabolic and hyperbolic automorphisms. This classification is due to a representation in the projective special linear group of the real field, or in terms of fixed points on the closure of the unit disc. In this paper, we will characterize this classification by the distance function of the Poincaré metric on the interior of the unit disc.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.950-954
• /
• 1998

This paper describes a development of traction unit for 2-motor driven electric vehicle (EV). The traction unit is consisted with an interior permanent magnet synchronous motor (IPMSM), a reduction gear and an inverter for electric vehicle that is driven by 2 motors without differential gear. For traction unit, prototype IPMSM and inverter have been developed. The IPMSM was designed by CAD program that was developed with both equivalent circuit method and FEM. Also the inverter was developed to drive 2 motors with 6 legs IGBT switches in a control board. The vector control algorithm was implemented with maximum torque control method in the constant torque region and field weakening control method in the constant power region considering inverter capacity. To verify that the traction unit is more high efficiency and has more high power density than a traction unit with induction motor with the same power, we would like to show the results about the design and analysis of the IPMSM and the experiment results about the traction unit.

• Korean Journal of Plant Resources
• /
• v.10 no.4
• /
• pp.300-304
• /
• 1997

Leaf dise explants of Solanum tuberosum cultivar. Desiree and Atlantic, were infected with a Agrobacterium MP90 strain containing chimeric gene construct, consisting of antibiotic and low temperature regulated gene (H28) for transformation. regenerated multiple shoots were selected on a medium containing kanamycin and carbenieillin after exposure to Agrobacterium. Both PCR analysis of NPT Ⅱ, H28 genes and northern blot analysis indicated that the genes coding for the enzyme were successfully integrated into the potato genome and could be expressed in potato plants.

• Mass Spectrometry Letters
• /
• v.5 no.4
• /
• pp.110-114
• /
• 2014

The method of direct mass spectrometry profiling is reliable and reproducible for the rapid identification of clinical isolates of bacteria and fungi. This is the first study evaluating the approach of MALDI-TOF mass spectrometry profiling for rapid identification of carbapenemase-resistant enterobacteriaceae (CRE). Proof of concept was achieved by the discrimination of CRE using MALDI Biotyper MS based on the protein. This profiling appears promising by the visual observation of consistent unique peaks, albeit low intensity, that could be picked up from the mean spectra (MSP) method. The Biotyper MSP creation and identification methods needed to be optimized to provide significantly improved differences in scores to allow for subspecies identification with and without carbapenemases. These spectra were subjected to visual peak picking and in all cases; there were pertinent differences in the presence or absence of potential biomarker peaks to differentiate isolates. We also evaluated this method for potential discrimination between different carbapenemases bacteria, utilizing the same strategy. Based on our data and pending further investigation in other CREs, MALDI-TOF MS has potential as a diagnostic tool for the rapid identification of even closely related carbapenemases but would require a paradigm shift in which Biotyper suppliers enable more flexible software control of mass spectral profiling methods.

• Korean System Dynamics Review
• /
• v.12 no.2
• /
• pp.5-36
• /
• 2011

Seoul citizens are currently suffering from high housing price. Home prices have risen more rapidly than salaries so owning a housing unit (apartment, condominium, or single-family home) in Seoul is becoming more difficult than ever. Therefore, this research examines the behavior of average Seoul citizen in owning housing unit in Seoul, Korea, particularly in terms of the length of time required to afford a house unit. This research estimates that it will take about 18.75 years in maximum after getting a job (12.75 years after purchasing the housing unit) to own housing unit in Seoul that is currently valued at $300,000 where the growth rate of income is 2.97% and consumption price increases at a rate of 2.95% per annum. Finally in this research, the optimal growth rate of housing price is estimated ranged from 3.5 to 4.0% minimizing the loan payoff period.

• Research in Mathematical Education
• /
• v.17 no.2
• /
• pp.99-118
• /
• 2013

The present study focuses on the contribution of a teaching unit to the development of spatial ability of third graders in general and from a gender point of view in particular. The research population consisted of seventy-four pupils: thirty-seven pupils in the experimental group who attended the teaching unit and thirty-seven pupils in the control group. The spatial ability of all the pupils was examined by means of common tests which checked cognitive capabilities of spatial ability. The research findings illustrate an improvement in the spatial ability of the experimental group pupils following the participation in the teaching unit. Moreover, regarding the gender aspect, the findings show that there was no significant differentiation between the spatial ability of third grade boys and the spatial ability of girls of the same age group.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.251-252
• /
• 2021

With the recent emergence of the 4th Industrial Revolution, the government is promoting the development of smart construction technology and institutional improvement through various policies to induce cutting-edge and technological innovation in the construction industry. As part of such smart construction technology, the application of BIM is being activated, and related regulations and guidelines are constantly being supplemented. In relation to BIM, there are many studies on the fields of library, design standards etc., but research on specific unit price utilization and unit price DB construction for calculating construction cost is insufficient. Therefore, in this study, a basic study was conducted on the linkage of the construction standard market unit price and the BIM library. Based on the basic research conducted in the future, we intend to establish specific standards for calculating BIM-based construction costs.