• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.322-330
• /
• 1994

The Universal Soil Loss Equation (USLE) has been widely used to predict long-term soil loss by incorporating several erosion factors, such as rainfall, soil, topography, and vegetation. This study is aimed to introduce the LISLE within geographic information system(GIS) environment. The Kwangneung Experimental Forest located in Kyongki Province was selected for the study area. Initially, twelve years of hourly rainfall records that were collected from 1982 to 1993 were processed to obtain the rainfall factor(R) value for the LISLE calculation. Soil survey map and topographic map of the study area were digitized and subsequent input values(K, L, S factors) were derived. The cover type and management factor (C) values were obtained from the classification of Landsat Thematic Mapper(CM) satellite imagery. All these input values were geographically registered over a common map coordinate with $25{\times}25m^2$ ground resolution. The USLE was calculated for every grid location by selecting necessary input values from the digital base maps. Once the LISLE was calculated, the resultant soil loss values(A) were represented by both numerical values and map format. Using GIS to run the LISLE, it is possible to pent out the exact locations where soil loss potential is high. In addition, this approach can be a very effective tool to monitor possible soil loss hazard under the situations of forest changes, such as conversion of forest lands to other uses, forest road construction, timber harvesting, and forest damages caused by fire, insect, and diseases.

• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.61-68
• /
• 2018

This paper deals with ground clutter model for FOD (foreign object debris) surveillance FMCW (frequency modulated continuous waveform) radar. In the FOD surveillance radar, it has received not only the signals reflected by FOD, but also the clutters of the surface of the runway and the grassland simultaneously. However, to detect the FOD, the clutter rejection algorithm is necessary because the RCS (radar cross section) of FOD is nearly same to RCS of the grassland. In addition, it is difficult to apply the MTI (moving target indicator) algorithm as the clutter rejection algorithm because both the FOD and the clutter coexist stationarily. Hence, to remove the stationary clutter, it is crucial to accurately generate clutter map considering the surface of road. In this paper, in order to generate the clutter map, the respective beat signal at every range bin is generated in the case of only the surface without FOD, and then the beat signal accumulated 100 times. And also, Weibull distribution is applied to the RCS value to take the scattering distribution of clutter into consideration. The simulation results show that FOD can be well detected by applying the generated clutter map to the FOD FMCW radar.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.149-156
• /
• 2021

This study collected and analyzed case studies related with the use of spatial information in North Korea to prioritize construction and required supporting processes in order to propose a short-term and long-term road map for the establishment of spatial information in North Korea. Recent research cases related to the prioritization of spatial information development were analyzed, and priority for the construction of infrastructure was derived based on the interconnectedness and relationship of national infrastructure. Due to the inaccessibility and remoteness of North Korea, all of the five studies determined priorities according to questionnaires and consulting of refugees and knowledgeable figures by expert groups. In summary, priority was given to unarmed and transborder areas, major cities, special zones, and development zones, while in terms of facilities, priority was given to power communication, railroads, water and sewage architectural buildings, roads, and dams. In the case of prioritizing the establishment of national infrastructure for the unified Korean Peninsula, the development of major areas, ports, and the related city-level spots to develop a line that promotes the sharing of routes such as transportation networks, water, and energy, thus leading to a scenario involving the development of cotton at an urban and national level.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.89-102
• /
• 2024

The recent advancements in Smart City and Digital Twin technologies have highlighted the critical role of integrating GIS and BIM in urban planning and construction projects. This integration ensures the consistency and accuracy of information, facilitating smooth information exchange. However, achieving interoperability requires standardization and effective project integration management strategies. This study proposes interoperability solutions for the integration of GIS and BIM for managing various projects. The research involves an in-depth analysis of the IFC schema and data structures based on the latest IFC4 version and proposes methods to ensure the consistency of reference point coordinates and coordinate systems. The study was conducted by setting the EPSG:5186 coordinate system, used by the National Geographic Information Institute's digital topographic map, and applying virtual shift origin coordinates. Through BIMvision, the results of the shape and error check coordinates' movement in the BIM model were reviewed, confirming that the error check coordinates moved consistently with the reference point coordinates. Additionally, it was verified that even when the coordinate system was changed to EPSG:5179 used by Naver Map and road name addresses, or EPSG:5181 used by Kakao Map, the BIM model's shape and coordinates remained consistently unchanged. Notably, by inputting the EPSG code information into the IFC file, the potential for coordinate system interoperability between projects was confirmed. Therefore, this study presents an integrated and systematic management approach for information sharing, automation processes, enhanced collaboration, and sustainable development of GIS and BIM. This is expected to improve compatibility across various software platforms, enhancing information consistency and efficiency across multiple projects.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2019

Among the government-sponsored projects supported by Ministry of SMEs and Startups(MSS), the financial support of the Consulting Research Institutes of our university is scheduled to be ended this year. In this regard, this study is to develop a profit model for R&D center of Consulting Research Institute that can cultivate the financial independence of R&D center of Consulting Research Institutes and foster technology convergence consulting manpower to strengthen the competitiveness of SMEs in preparation for the Fourth Industrial Revolution. The profit model were derived from the current status of consulting industry and similar organizations, the current status of consulting graduate R&D centers, case studies of other universities, and focus group interviews. In order to select three high profit models and commercialize them, BMC (Biz Model Canvas) was used and business feasibility was examined. Therefore, three profit model of R&D center of Consulting Research Institute are: First, SCB (SME's Consulting Business: Total Solution Provider for SMEs through Technology Convergence Consulting), Second, SNB (SME's Network Business: Experts connection in Consulting Graduate School for Solving Problems and Problems of SMEs / Industry Consolidation) And third, SM (Sustainable Management: Financial independence through structural improvement of Consulting Research Institute), and the road-map was established. As an implementation plan, the company intends to seek financial independence by developing a profit model for R&D center of Consulting Research Institutes and by establishing business goals and strategies, manpower operation plan, organization, and investment plan for three years.

• Journal of Contemporary Eastern Asia
• /
• v.16 no.1
• /
• pp.48-68
• /
• 2017

Manual elections processes in Egypt have several negative effects; that mainly leads to political corruption due to the lack of transparency. These issues negatively influence citizen's participation in the political life; while electronic voting systems aim to increase efficiency, transparency, and reduce the cost comparing to the manual voting. The main research objectives are, finding the successful factors that positively affects E-voting implementation in Egypt, in addition of finding out the reasons that keep Egyptian government far from applying E-voting, and to come up with the road map that Egyptian government has to take into consideration to successfully implement E-voting systems. The findings of the study suggest that there are seven independent variables affecting e-voting implementation which are; leadership, government willingness, legal framework, technical quality, awareness, citizen's trust in government and IT literacy. Technology-Organization-Environment (TOE) theory was used to provide an analytical framework for the study. A quantitative approach (i.e., survey questionnaire) strategy was used to collect data. A random sampling method was used to select the participants for the survey, whom are targeted voters in Egypt and have access to the internet, since the questionnaire was distributed online and the data is analyzed using regression analysis. Practical implications of this study will lead for more citizen participation in the political life due to the transparency that E-voting system will create, in addition to reduce the political corruption.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.414-417
• /
• 2005

Single point diamond turning technique for optical crystals is studied in this paper. The main factors which are influential the machined surface quality are discovered and regularities of machining process are drawn. Optical crystals have found more and more important applications in the field of modern optics. Optical crystals are mostly brittle materials of poor machinability. The traditional machining method is polishing which has many shortcomings such as low production efficiency, poor ability to be automatically controlled and edge effect of the workpiece. The purpose of our research is to find the optimal machining conditions for ductile cutting of optical crystals and to apply the SPDT technique to the manufacturing of ultra precision optical components of brittle material(Ge). Many technical challenges are being tried for the large space infrared telescope, which is one of the major objectives of the National Strategic Technology Road Map (NSTRM).

• Journal of Korean Physical Therapy Science
• /
• v.16 no.2
• /
• pp.45-55
• /
• 2009

Background: This thesis aims at suggesting the direction for the introduction of public free treatment support system according to the establishment of [Special Education Law] and the right settlement of therapeutic support service. Method: It introduced the characteristics and the contents of school based PT & OT, diagnosis and evaluation, and operation method. It set up question items and presented intervention plan, and substantial intervention, beginning from the request of whole process. The diagnostic evaluation was described from 4 aspects, which are consideration matters in the time of document drawing and diagnostic evaluation, chiefly centering around SOAP. The flow of overall treatment support service, the allocation of 16 handicapped children for 1 therapist, and the weekly treatment frequency according to the treatment support location and environment were suggested in the concrete operation method. Result: The concrete method should be explored in order to provide handicapped students with requisite services, which are offered by various experts in the amended 'Special Education Law'. In addition, work condition and social welfare, which are equal to school teachers, should be provided for all experts. Conclusion: Along with these things, special education support center should establish the road-map for the education rehabilitation of the handicapped children from the evaluation of early diagnosis of the handicapped children to treatment support and lifelong education.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.656-660
• /
• 2004

The Mobile Mapping System is an effective method to acquire the position and image data using vehicle equipped with the GPS (Global Positioning System), IMU (Inertial Measurement Unit), and CCD camera. It is used in various fields of road facility management, map update, and etc. In the general photogrammetry such as aerial photogrammetry, GCP (Ground Control Point)s are needed to compute the image exterior orientation elements (the position and attitude of camera). These points are measured by field survey at the time of data acquisition. But it costs much time and money. Moreover, it is not possible to make sufficient GCP as much as we want. However Mobile Mapping System is more efficient both in time and money because it can obtain the position and attitude of camera at the time of photographing. That is, Indirect Georeferencing must use GCP to compute the image exterior orientation elements, but on the other hand Direct Georeferencing can directly compute the image exterior orientation elements by GPS/INS. In this paper, we analyze about the positional accuracy comparison of ground point using the Direct Georeferencing and Indirect Georeferencing.

• Journal of Korean Society for Quality Management
• /
• v.44 no.2
• /
• pp.277-296
• /
• 2016

Purpose: Propose model to diagnose and assess National Defense Industry and quality management by investigating and analyzing established standard model. Methods: Research on established internal model including MB, EQA and JQA model and make standard index for quality index extraction and quantitative index to test objectively for internal state. Results: Extract advantage and disadvantage by performance of National Defense Industry level diagnose and build foundation for quality management policy and road map. Conclusion: Due to result of diagnostic assesment of quality management of national defense industry, dependability, SCQM and safety part shows vulnerability and require improvement and support.