• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.141-173
• /
• 2007

The study examines how the environmental factors of store influence service brand personality and repurchase intention in the service environment. The service industry has been experiencing the intensified competition with the industry's continuous growth and the influence from rapid technological advancement. Under the circumstances, it has become ever more important for the brand competitiveness to be distinctively recognized against competition. A brand needs to be distinguished and differentiated from competing companies because they are all engaged in the similar environment of the service industry. The differentiation of brand achievement has become increasingly important to highlight certain brand functions to include emotional, self-expressive, and symbolic functions since the importance of such functions has been further emphasized in promoting consumption activities. That is the recent role of brand personality that has been emphasized in the service industry. In other words, customers now freely and actively express their personalities or egos in consumption activities, taking an important role in construction of a brand asset. Hence, the study suggests that it is necessary to disperse the recognition and acknowledgement that the maintenance of the existing customers contributes more to boost repurchase intention when it is compared to the efforts to create new customers, particularly in the service industry. Meanwhile, the store itself can offer a unique environment that may influence the consumer's purchase decision. Consumers interact with store environments in the process of,virtually, all household purchase they make (Sarel 1981). Thus, store environments may encourage customers to purchase. The roles that store environments play are to provide informational cues to customers about the store and goods and communicate messages to stimulate consumers' emotions. The store environments differentiate the store from competing stores and build a unique service brand personality. However, the existing studies related to brand in the service industry mostly concentrated on the relationship between the quality of service and customer satisfaction, and they are mostly generalized while the connective studies focused on brand personality. Such approaches show limitations and are insufficient to investigate on the relationship between store environment and brand personality in the service industry. Accordingly, the study intends to identify the level of contribution to the establishment of brand personality made by the store's physical environments that influence on the specific brand characteristics depending on the type of service. The study also intends to identify what kind of relationships with brand personality exists with brand personality while being influenced by store environments. In addition, the study intends to make meaningful suggestions to better direct marketing efforts by identifying whether a brand personality makes a positive influence to induce an intention for repurchase. For this study, the service industry is classified into four categories based on to the characteristics of service: experimental-emotional service, emotional -credible service, credible-functional service, and functional-experimental service. The type of business with the most frequent customer contact is determined for each service type and the enterprise with the highest brand value in each service sector based on the report made by the Korea Management Association. They are designated as the representative of each category. The selected representatives are a fast-food store (experimental-emotional service), a cinema house (emotional-credible service), a bank (credible-functional service), and discount store (functional-experimental service). The survey was conducted for the four selected brands to represent each service category among consumers who are experienced users of the designated stores in Seoul Metropolitan City and Gyeonggi province via written questionnaires in order to verify the suggested assumptions in the study. In particular, the survey adopted 15 scales, which represent each characteristic factor, among the 42 unique characteristics developed by Jennifer Aaker(1997) to assess the brand personality of each service brand. SPSS for Windows Release 12.0 and LISREL were used in the analysis of data verification. The methodology of the structural equation model was used for the study and the pivotal findings are as follows. 1) The environmental factors ware classified as design factors, ambient factors, and social factors. Therefore, the validity of measurement scale of Baker et al. (1994) was proved. 2) The service brand personalities were subdivided as sincerity, excitement, competence, sophistication, and ruggedness, which makes the use of the brand personality scales by Jennifer Aaker(1997) appropriate in the service industry as well. 3) One-way ANOVA analysis on the scales of store environment and service brand personality showed that there exist statistically significant differences in each service category. For example, the social factors were highest in discount stores, while the ambient factors and design factors were highest in fast-food stores. The discount stores were highest in the sincerity and excitement, while the highest point for banks was in the competence and ruggedness, and the highest point for fast-food stores was in the sophistication, The consumers will make a different respond to the physical environment of stores and service brand personality that are inherent to the corresponding service interface. Hence, the customers will make a different decision-making when dealing with different service categories. In this aspect, the relationships of variables in the proposed hypothesis appear to work in a different way depending on the exposed service category. 4) The store environment factors influenced on service brand personalities differently by category of service. The factors of store's physical environment are transferred to a brand and were verified to strengthen service brand personalities. In particular, the level of influence on the service brand personality by physical environment differs depending on service category or dimension, which indicates that there is a need to apply a different style of management to a different service category or dimension. It signifies that there needs to be a brand strategy established in order to positively influence the relationship with consumers by utilizing an appropriate brand personality factor depending on different characteristics by service category or dimension. 5) The service brand personalities influenced on the repurchase intention. Especially, the largest influence was made in the sophistication dimension of service brand personality scale; the unique and characteristically appropriate arrangement of physical environment will make customers stay in the service environment for a long time and will lead to give a positive influence on the repurchase intention. 6) The store environment factors influenced on the repurchase intention. Particularly, the largest influence was made on the social factors of store environment. The most intriguing finding is that the service factor among all other environment factors gives the biggest influence to the repurchase intention in most of all service types except fast-food stores. Such result indicates that the customers pay attention to how much the employees try to provide a quality service when they make an evaluation on the service brand. At the same time, it also indicates that the personal factor is directly transmitted to the construction of brand personality. The employees' attitude and behavior are the determinants to establish a service brand personality in the process of enhancing service interface. Hence, there should be a reinforced search for a method to efficiently manage the service staff who has a direct contact with customers in order to make an affirmative improvement of the customers' brand evaluation at the service interface. The findings suggest several managerial implications. 1) Results from the empirical study indicated that store environment factors have a strong positive impact on a service brand personality. To increase customers' repurchase intention of a service brand, the management is required to effectively manage store environment factors and create a friendly brand personality based on the corresponding service environment. 2) Mangers and researchers must understand and recognize that the store environment elements are important marketing tools, and that brand personality influences on consumers' repurchase intention. Based on such result of the study, a service brand could be utilized as an efficient measure to achieve a differentiation by enforcing the elements that are most influential among all other store environments for each service category. Therefore, brand personality established involving various store environments will further reinforce the relationship with customers through the elevated brand identification of which utilization to induce repurchase decision can be used as an entry barrier. 3) The study identified the store environment as a component of service brand personality for the store's effective communication with consumers. For this, all communication channels should be maintained with consistency and an integrated marketing communication should be executed to efficiently approach to a larger number of customers. Mangers and researchers must find strategies for aligning decisions about store environment elements with the retailers' marketing and store personality objectives. All ambient, design, and social factors need to be orchestrated so that consumers can take an appropriate store personality. In this study, the induced results from the previous studies were extended to the service industry so as to identify the customers' decision making process that leads to repurchase intention and a result similar to those of the previous studies. The findings suggested several theoretical and managerial implications. However, the situation that only one service brand served as the subject of analysis for each service category, and the situation that correlations among store environment elements were not identified, as well as the problem of representation in selection of samples should be considered and supplemented in the future when further studies are conducted. In addition, various antecedents and consequences of brand personality must be looked at in the aspect of the service environment for further research.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.1-34
• /
• 1974

The author intended to investigate external and internal changes in the cone structure, changes in water content, sugar, fat and protein during the period of seed maturation which bears a proper germinability. The experimental results can be summarized as in the following. 1. Male flowers 1) Pollen-mother cells occur as a mass from late in April to early in May, and form pollen tetrads through meiosis early and middle of May. Pollen with simple nucleus reach maturity late in May. 2) Stamen number of a male flower is almost same as the scale number of cone and is 69-102 stamens. One stamen includes 5800-7300 pollen. 3) The shape is round and elliptical, both of a pollen has air-sac with $80-91{\mu}$ in length, and has cuticlar exine and cellulose intine. 4) Pollen germinate in 68 hours at $25^{\circ}C$ with distilled water of pH 6.0, 2% sugar and 0.8% agar. 2. Female flowers 1) Ovuliferous scales grow rapidly in late April, and differentiation of ovules begins early in May. Embryo-sac-mother cells produce pollen tetrads through meiosis in the middle of May, and flower in late May. 2) The pollinated female flowers show repeated divisions of embryo-sac nucleus, and a great number of free nuclei form a mass for overwintering. Morphogenesis of isolation in the mass structure takes place from the middle of March, and that forms albuminous bodies of aivealus in early May. 3. Formation of pollinators and embryos. 1) Archegonia produce archegonial initial cells in the middle and late April, and pollinators are produced in the late April and late in early May. 2) After pollination, Oespore nuclei are seen to divide in the late May forming a layer of suspensor from the diaphragm in early June and in the middle of June. Thus this happens to show 4 pro-embryos. The organ of embryos begins to differentiate 1 pro-embryo and reachs perfect maturation in late August. 4. The growth of cones 1) In the year of flowering, strobiles grow during the period from the middle of June to the middle of July, and do not grow after the middle of August. Strobiles grow 1.6 times more in length 3.3 times short in diameter and about 22 times more weight than those of female flower in the year of flowering. 2) The cones at the adult stage grow 7 times longer in diameter, 12-15 times shorter diameter than those of strobiles after flowering. 3) Cone has 96-133 scales with the ratio of scale to be 69-80% and the length of cone is 11-13cm. Diameter is 5-8cm with 160-190g weight, and the seed number of it is 90-150 having empty seed ratio of 8-15%. 5. Formation of seed-coats 1) The layers of outer seed-coat become most for the width of $703{\mu}$ in the middle of July. At the adult stage of seed, it becomes $550-580{\mu}$ in size by decreasing moisture content. Then a horny and the cortical tissue of outer coats become differentiated. 2) The outer seed-coat of mature seeds forms epidermal cells of 3-4 layers and the stone cells of 16-21 layers. The interior part of it becomes parenchyma layer of 1 or 2 rows. 3) Inner seed-coat is formed 2 months earlier than the outer seed-coat in the middle of May, having the most width of inner seed-coat $667{\mu}$. At the adult stage it loses to $80-90{\mu}$. 6. Change in moisture content After pollination moisture content becomes gradually increased at the top in the early June and becomes markedly decreased in the middle of August. At the adult stage it shows 43~48% in cone, 23~25% in the outer seed-coat, 32~37% in the inner seed-coat, 23~26% in the inner seed-coat and endosperm and embryo, 21~24% in the embryo and endosperm, 36~40% in the embryos. 7. The content compositions of seed 1) Fat contents become gradually increased after the early May, at the adult stage it occupies 65~85% more fat than walnut and palm. Embryo includes 78.8% fat, and 57.0% fat in endosperm. 2) Sugar content after pollination becomes greatly increased as in the case of reducing sugar, while non-reducing sugar becomes increased in the early June. 3) Crude protein content becomes gradually increased after the early May, and at the adult stage it becomes 48.8%. Endosperm is made up with more protein than embryo. 8. The test of germination The collected optimum period of Pinus koraiensis seeds at an adequate maturity was collected in the early September, and used for the germination test of reduction-method and embryo culture. Seeds were taken at the interval of 7 days from the middle of July to the middle of September for the germination test at germination apparatus.

• Journal of Information Management
• /
• v.6 no.5
• /
• pp.131-134
• /
• 1973

본고(本稿)시리이즈의 제1보(第一報)에서 우리는 물리(物理), 사회과학(社會科學) 및 공학분야(工學分野)의 12,442명(名)의 과학자(科學者)와 기술자(技術者)에 대한 정보교환활동(情報交換活動)의 78례(例)에 있어서 일반과정(一般過程)과 몇 가지 결과(結果)를 기술(記述)한 바 있다. 4년반(年半) 이상(以上)의 기간(其間)($1966{\sim}1971$)에서 수행(遂行)된 이 연구(硏究)는 현재(現在)의 과학지식(科學知識)의 집성체(集成體)로 과학자(科學者)들이 연구(硏究)를 시작(始作)한 때부터 기록상(記錄上)으로 연구결과(硏究結果)가 취합(聚合)될 때까지 각종(各種) 정형(定形), 비정형(非定形) 매체(媒體)를 통한 유통정보(流通情報)의 전파(傳播)와 동화(同化)에 대한 포괄적(包括的)인 도식(圖式)으로 표시(表示)할 수 있도록 설정(設定)하고 또 시행(施行)되었다. 2보(二報), 3보(三報), 4보(四報)에서는 데이터 뱅크에 수집(蒐集) 및 축적(蓄積)된 데이터의 일반적(一般的)인 기술(記述)을 적시(摘示)하였다. (1) 과학(科學)과 기술(技術)의 정보유통(情報流通)에 있어서 국가적(國家的) 회합(會合)의 역할(役割)(Garvey; 4보(報)) 국가적(國家的) 회합(會合)은 투고(投稿)와 이로 인한 잡지중(雜誌中) 게재간(揭載間)의 상대적(相對的)인 오랜 기간(期間)동안 이러한 연구(硏究)가 공개매체(公開媒體)로 인하여 일시적(一時的)이나마 게재여부(揭載如否)의 불명료성(不明瞭性)을 초래(招來)하기 전(前)에 과학연구(科學硏究)의 초기전파(初期傳播)를 위하여 먼저 행한 주요(主要) 사례(事例)와 마지막의 비정형매체(非定形媒體)의 양자(兩者)를 항상 조직화(組織化)하여 주는 전체적(全體的)인 유통과정(流通過程)에 있어서 명확(明確)하고도 중요(重要)한 기능(機能)을 갖는다는 것을 알 수 있었다. (2) 잡지(雜誌)에 게재(揭載)된 정보(情報)의 생산(生産)과 관련(關聯)되는 정보(情報)의 전파과정(傳播過程)(Garvey; 1보(報)). 이 연구(硏究)를 위해서 우리는 정보유통과정(情報流通過程)을 따라 많은 노력(努力)을 하였는데, 여기서 유통과정(流通過程)의 인상적(印象的)인 면목(面目)은 특별(特別)히 연구(硏究)로부터의 정보(情報)는 잡지(雜誌)에 게재(揭載)되기까지 진정으로는 공개적(公開的)이 못된다는 것과 이러한 사실(事實)은 선진연구(先進硏究)가 자주 시대(時代)에 뒤떨어지게 된다는 것을 발견할 수 있었다. 경험(經驗)이 많은 정보(情報)의 수요자(需要者)는 이러한 폐물화(廢物化)에 매우 민감(敏感)하며 자기(自己) 연구(硏究)에 당면한, 진행중(進行中)이거나 최근(最近) 완성(完成)된 연구(硏究)에 대하여 정보(情報)를 얻기 위한 모든 수단(手段)을 발견(發見)코자 하였다. 예를 들어, 이들은 잡지(雜誌)에 보문(報文)을 발표(發表)하기 전(前)에 발생(發生)하는 정보전파과정(情報傳播過程)을 통하여 유루(遺漏)될지도 모르는 정보(情報)를 얻기 위하여 한 잡지(雜誌)나 2차자료(二次資料) 또는 전형적(典型的)으로 이용(利用)되는 다른 잡지류중(雜誌類中)에서 당해정보(當該情報)가 발견(發見)되기를 기다리지 않는다는 것이다. (3) "정보생산 과학자(情報生産 科學者)"에 의한 정보전파(情報傳播)의 계속성(繼續性)(이 연구(硏究) 시리이즈의 결과(結果)는 본고(本稿)의 주내용(主內容)으로 되어 있다.) 1968/1969년(年)부터 1970/1971년(年)의 이년기간(二年期間)동안 보문(報文)을 낸 과학자(科學者)(1968/1969년(年) 잡지중(雜誌中)에 "질이 높은" 보문(報文)을 발표(發表)한)의 약 2/3는 1968/1969의 보문(報文)과 동일(同一)한 대상영역(對象領域)의 연구(硏究)를 계속(繼續) 수행(遂行)하였다. 그래서 우리는 본연구(本硏究)에 오른 대부분(大部分)의 저자(著者)가 정상적(正常的)인 과학(科學), 즉 연구수행중(硏究遂行中) 의문(疑問)에 대한 완전(完全)한 해답(解答)을 얻게 되는 가장 중요(重要)한 추구(追求)로서 Kuhn(제5보(第5報))에 의하여 기술(技術)된 방법(방법)으로 과학(연구)(科學(硏究))을 실행(實行)하였음을 알았다. 최근(最近)에 연구(硏究)를 마치고 그 결과(結果)를 보문(報文)으로서 발표(發表)한 이들 과학자(科學者)들은 다음 단계(段階)로 해야 할 사항(事項)에 대하여 선행(先行)된 동일견해(同一見解)를 가진 다른 연구자(硏究자)들의 연구(硏究)와 대상(對象)에 밀접(密接)하게 관련(關聯)되고 있다. 이 계속성(繼續性)의 효과(效果)에 대한 지표(指標)는 보문(報文)과 동일(同一)한 영역(領域)에서 연구(硏究)를 계속(繼續)한 저자(著者)들의 약 3/4은 선행(先行) 보문(報文)에 기술(技術)된 연구결과(硏究結果)에서 직접적(直接的)으로 새로운 연구(硏究)가 유도(誘導)되었음을 보고(報告)한 사항(事項)에 반영(反映)되어 있다. 그렇지만 우리들의 데이터는 다음 영역(領域)으로 기대(期待)하지 않은 전환(轉換)을 일으킬 수도 있음을 보여주고 있다. 동일(同一) 대상(對象)에서 연구(硏究)를 속행(續行)하였던 저자(著者)들의 1/5 이상(以上)은 뒤에 새로운 영역(領域)으로 연구(硏究)를 전환(轉換)하였고 또한 이 영역(領域)에서 연구(硏究)를 계속(繼續)하였다. 연구영역(硏究領域)의 이러한 변화(變化)는 연구자(硏究者)의 일반(一般) 정보유통(情報流通) 패턴에 크게 변화(變化)를 보이지는 않는다. 즉 새로운 지적(知的) 문제(問題)에 대한 변화(變化)에서 야기(惹起)되는 패턴에 있어서 저자(著者)들은 오래된 문제(問題)의 방법(方法)과 기술(技術)을 새로운 문제(問題)로 맞추려 한다. 과학사(科學史)의 최근(最近) 해석(解釋)(Hanson: 6보(報))에서 예기(豫期)되었던 바와 같이 정상적(正常的)인 과학(科學)의 계속성(繼續性)은 항상 절대적(絶對的)이 아니며 "과학지식(科學知識)"의 첫발자욱은 예전 연구영역(硏究領域)의 대상(對象)에 관계(關係)없이 나타나는 다른 영역(領域)으로 내딛게 될지도 모른다. 우리들의 연구(硏究)에서 저자(著者)의 1/3은 동일(同一) 영역(領域)의 대상(對象)에서 속계적(續繼的)인 연구(硏究)를 수행(遂行)치 않고 새로운 영역(領域)으로 옮아갔다. 우리는 이와 같은 데이터를 (a) 저자(著者)가 각개과학자(各個科學者)의 활동(活動)을 통하여 집중적(集中的)인 과학적(科學的) 노력(努力)을 시험(試驗)할 때 각자(各自)의 연구(硏究)에 대한 많은 양(量)의 계속성(繼續性)이 어떤 진보중(進步中)의 과학분야(科學分野)에서도 나타난다는 것과 (b) 이 계속성(繼續性)은 과학(科學)에 대한 집중적(集中的) 진보(進步)의 필요적(必要的) 특질(特質)이라는 것을 의미한다. 또한 우리는 이 계속성(繼續性)과 관련(關聯)되는 유통문제(流通問題)라는 새로운 대상영역(對象領域)으로 전환(轉換)할 때 연구(硏究)의 각단계(各段階)의 진보(進步)와 새로운 목적(目的)으로 전환시(轉換時) 양자(兩者)가 다 필요(必要)로 하는 각개(各個) 과학자(科學者)의 정보수요(情報需要)를 위한 시간(時間) 소비(消費)라는 것을 탐지(探知)할 수 있다. 이러한 관찰(觀察)은 정보(情報)의 선택제공(選擇提供)시스팀이 현재(現在) 필요(必要)로 하는 정보(情報)의 만족(滿足)을 위하여는 효과적(效果的)으로 매우 융통성(融通性)을 띠어야 한다는 것을 암시(暗示)하는 것이다. 본고(本稿)의 시리이즈에 기술(記述)된 전정보유통(全情報流通) 과정(過程)의 재검토(再檢討) 결과(結果)는 과학자(科學者)들이 항상 그들의 요구(要求)를 조화(調和)시키는 신축성(伸縮性)있는 유통체제(流通體制)를 발전(發展)시켜 왔다는 것을 시사(示唆)해 주고 있다. 이 시스팀은 정보전파(情報傳播) 사항(事項)을 중심(中心)으로 이루어 지며 또한 이 사항(事項)의 대부분(大部分)의 참여자(參與者)는 자기자신(自己自身)이 과학정보(科學情報) 전파자(傳播者)라는 기본적(基本的)인 정보전파체제(情報傳播體制)인 것이다. 그러나 이 과정(過程)의 유통행위(流通行爲)에서 살펴본 바와 같이 우리는 대부분(大部分)의 정보전파자(情報傳播者)가 역시 정보(情報)의 동화자(同化者)-다시 말해서 과학정보(科學情報)의 생산자(生産者)는 정보(情報)의 이용자(利用者)라는 것을 알 수 있다. 이 연구(硏究)에서 전형적(典型的)인 과학자((科學者)는 과학정보(科學情報)의 생산(生産)이나 전파(傳播)의 양자(兩者)에 연속적(連續的)으로 관계(關係)하고 있음을 보았다. 만일(萬一) 연구자(硏究者)가 한 편(編)의 연구(硏究)를 완료(完了)한다면 이 연구자(硏究者)는 다음에 무엇을 할 것이냐 하는 관념(觀念)을 갖게 되고 따라서 "완료(完了)된" 연구(硏究)에 관한 정보(情報)를 이용(利用)하여 동시(同時)에 새로운 일을 시작(始作)하게 된다. 예를 들어, 한 과학자(科學者)가 동일(同一) 영역(領域)의 다른 동료연구자(同僚硏究者)에게 완전(完全)하며 이의(異議)에 방어(防禦)할 수 있는 보고서(報告書)를 제공(提供)할 수 있는 단계(段階)에 도달(到達)하였다면 우리는 이 과학자(科學者)가 정보유통과정(情報流通過程)에서 많은 역할(役割)을 해낼 수 있다는 것을 알 것이다. 즉 이 과학자(科學者)는 다른 과학자(科學者)들에게 최신(最新)의 과학적(科學的) 결과(結果)를 제공(提供)할 때 하나의 과학정보(科學情報) 전파자(傳播者)가 되며, 이 연구(硏究)의 의의(意義)와 타당성(妥當性)에 관한 논평(論評)이나 비평(批評)을 동료(同僚)로부터 구(求)하는 관점(觀點)에서 보면 이 과학자(科學者)는 하나의 정보탐색자(情報探索者)가 된다. 또한 장래(將來)의 이용(利用)을 위하여 증정(贈呈)이나 동화(同化)한 이 정보(情報)로부터 피이드백을 받아 드렸을 때의 범주(範疇)에서 보면 (잡지(雜誌)에 투고(投稿)하기 위하여 원고(原稿)를 작성(作成)하는 경우에 있어서와 같이) 과학자(科學者)는 하나의 정보이용자(情報利用者)가 되고 이러한 모든 가능성(可能性)에서 정보생산자(情報生産者)는 다음 정보생산(情報生産)에 이미 들어가 있다고 볼 수 있다(저자(著者)들의 2/3는 보문(報文)이 게재(揭載)되기 전(前)에 이미 새로운 연구(硏究)를 시작(始作)하였다). 과학자(科學者)가 자기연구(自己硏究)를 마치고 예비보고서(豫備報告書)를 만든 후(後) 자기연구(自己硏究)에 관한 정보(情報)의 전파(傳播)를 계속하게 되는데 이와 관계(關係)되는 일반적(一般的)인 패턴을 보면 소수(少數)의 동료(同僚)그룹에 출석(出席)하는 경우 (예로 지역집담회)(地域集談會))와 대중(大衆) 앞에서 행(行)하는 경우(예로 국가적 회합(國家的 會合)) 등이 있다. 그러는 동안에 다양성(多樣性) 있는 성문보고서(成文報告書)가 이루어진다. 그러나 과학자(科學者)들이 자기연구(自己硏究)를 위한 주정보전파목표(主情報傳播目標)는 과학잡지중(科學雜誌中)에 게재(揭載)되는 보문(報文)이라는 것이 명확(明確)한 사실(事實)인 것이다. 이러한 목표(目標)에 도달(到達)할 때까지의 각(各) 정보전파단계(情報傳播段階)에서 과학자(科學者)들은 목표달성(目標達成)을 위하여 청중(聽衆), 자기동화(自己同化)된 정보(情報) 및 이미 이용(利用)된 정보(情報)로부터 피이드백을 탐색(探索)하게 된다. 우리가 본고(本稿)의 시리이즈중(中)에 표현(表現)하려 했던 바와 같이 이러한 활동(活動)은 조사수임자(調査受任者)의 의견(意見)이 원고(原稿)에 반영(反映)되고 또 그 원고(原稿)가 잡지게재(雜誌揭載)를 위해 수리(受理)될 때까지 계속적(繼續的)으로 정보(情報)를 탐색(探索)하는 과학자(科學者)나 기타(其他)사람들에게 효과적(效果的)이었다. 원고(原稿)가 수리(受理)되면 그 원고(原稿)의 저자(著者)들은 그 보문(報文)의 주내용(主內容)에 대하여 적극적(積極的)인 정보전파자(情報傳播者)로서의 역할(役割)을 종종 중지(中止)하는 일이 있는데 이때에는 저자(著者)들의 역할(役割)이 변화(變化)하는 것을 볼 수 있었다. 즉 이 저자(著者)들은 일시적(一時的)이긴 하나 새로운 일을 착수(着手)하기 위하여 정보(情報)의 동화자(同化者)를 찾게 된다. 또한 전(前)에 행한 일에 대한 의견(意見)이나 비평(批評)이 새로운 일에 영향(影響)을 끼치게 된다. 동시(同時)에 새로운 과학정보생산(科學情報生産) 과정(過程)에 들어가게 되고 현재(現在) 진행중(進行中)이거나 최근(最近) 완료(完了)한 연구(硏究)에 대한 정보(情報)를 항상 찾게 된다. 활발(活潑)한 연구(硏究)를 하는 과학자(科學者)들에게는, 동화자(同化者)로서의 역할(役割)과 전파자(傳播者)로서의 역할(役割)을 분리(分離)시킨다는 것은 실제적(實際的)은 못된다. 즉 후자(後者)를 완성(完成)하기 위해서는 전자(前者)를 이용(利用)하게 된다는 것이다. 과학자(科學者)들은 한 단계(段階)에서 한 전파자(傳播者)로서의 역할(役割)이 뚜렷하나 다른 단계(段階)에서는 정보교환(情報交換)이 기본적(基本的)으로 정보동화(情報同化)에 직결(直結)되고 있는 것이다. 정보전파자(情報傳播者)와 정보동화자간(情報同化者間)의 상호관계(相互關係)(또는 정보생산자(情報生産者)와 정보이용자간(情報利用者間))는 과학(科學)에 있어서 하나의 필수양상(必修樣相)이다. 과학(科學)의 유통구조(流通構造)가 전파자(傳播者)(이용자(利用者)로서의 역할(役割)보다는)의 필요성(必要性)에서 볼 때 복잡(複雜)하고 다이나믹한 시스팀으로 구성(構成)된다는 사실(事實)은 과학(科學)의 발전과정(發展過程)에서 필연적(必然的)으로 나타난다. 이와 같은 사실(事實)은 과학정보(科學情報)의 전파요원(傳播要員)이 국가적 회합(國家的 會合)에서 자기연구(自己硏究)에 대한 정보(情報)의 전파기회(傳播機會)를 거절(拒絶)하고 따라서 전파정보(電波情報)를 판단(判斷)하고 선별(選別)하는 것을 감소(減少)시키며 결과적(結果的)으로 잡지(雜誌)나 단행본(單行本)에서 비평(批評)을 하고 추고(推敲)하는 것이 배제(排除)될 때는 유형적(有形的) 과학(科學)은 급속(急速)히 비과학성(非科學性)을 띠게 된다는 것을 Lysenko의 생애(生涯)에 대한 Medvedev의 기술중(記述中)[7]에 지적(指摘)한 것과 관계(關係)되고 있다.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.83-100
• /
• 2022

The Zhenzigou Pb-Zn deposit, which is one of the largest Pb-Zn deposit in the northeast of China, is located at the Qingchengzi mineral field in Jiao Liao Ji belt. The geology of this deposit consists of Archean granulite, Paleoproterozoinc migmatitic granite, Paleo-Mesoproterozoic sodic granite, Paleoproterozoic Liaohe group, Mesozoic diorite and Mesozoic monzoritic granite. The Zhenzigou deposit which is a strata bound SEDEX or SEDEX type deposit occurs as layer ore and vein ore in Langzishan formation and Dashiqiao formation of the Paleoproterozoic Liaohe group. White mica from this deposit are occured only in layer ore and are classified four type (Type I : weak alteration (clastic dolomitic marble), Type II : strong alteration (dolomitic clastic rock), Type III : layer ore (dolomitic clastic rock), Type IV : layer ore (clastic dolomitic marble)). Type I white mica in weak alteration zone is associated with dolomite that is formed by dolomitization of hydrothermal metasomatism. Type II white mica in strong alteration zone is associated with dolomite, ankerite, quartz and alteration of K-feldspar by hydrothermal metasomatism. Type III white mica in layer ore is associated with dolomite, ankerite, calcite, quartz and alteration of K-feldspar by hydrothermal metasomatism. And type IV white mica in layer ore is associated with dolomite, quartz and alteration of K-feldspar by hydrothermal metasomatism. The structural formulars of white micas are determined to be (K_0.92-0.80Na_0.01-0.00Ca_0.02-0.01Ba_0.00Sr_0.01-0.00)_0.95-0.83(Al_1.72-1.57Mg_0.33-0.20Fe_0.01-0.00Mn_0.00Ti_0.02-0.00Cr_0.01-0.00V_0.00Sb_0.02-0.00Ni_0.00Co_0.02-0.00)_1.99-1.90(Si_3.40-3.29Al_0.71-0.60)_4.00O₁₀(OH_2.00-1.83F_0.17-0.00)_2.00, (K_1.03-0.84Na_0.03-0.00Ca_0.08-0.00Ba_0.00Sr_0.01-0.00)_1.08-0.85(Al_1.85-1.65Mg_0.20-0.06Fe_0.10-0.03Mn_0.00Ti_0.05-0.00Cr_0.03-0.00V_0.01-0.00Sb_0.02-0.00Ni_0.00Co_0.03-0.00)_1.99-1.93(Si_3.28-2.99Al_1.01-0.72)_4.00O₁₀(OH_1.96-1.90F_0.10-0.04)_2.00, (K_1.06-0.90Na_0.01-0.00Ca_0.01-0.00Ba_0.00Sr_0.02-0.01)_1.10-0.93(Al_1.93-1.64Mg_0.19-0.00Fe_0.12-0.01Mn_0.00Ti_0.01-0.00Cr_0.01-0.00V_0.00Sb_0.00Ni_0.00Co_0.05-0.01)_2.01-1.94(Si_3.32-2.96Al_1.04-0.68)_4.00O₁₀(OH_2.00-1.91F_0.09-0.00)_2.00 and (K_0.91-0.83Na_0.02-0.01Ca_0.02-0.00Ba_0.01-0.00Sr_0.00)_0.93-0.83(Al_1.84-1.67Mg_0.15-0.08Fe_0.07-0.02Mn_0.00Ti_0.04-0.00Cr_0.06-0.00V_0.02-0.00Sb_0.02-0.01Ni_0.00Co_0.00)_2.00-1.92(Si_3.27-3.16Al_0.84-0.73)_4.00O₁₀(OH_1.97-1.88F_0.12-0.03)_2.00, respectively. It indicated that white mica of from the Zhenzigou deposit has less K, Na and Ca, and more Si than theoretical dioctahedral mica. Compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution. It means that the Fe in white mica exists as Fe²⁺ and Fe³⁺, but mainly as Fe²⁺. Therefore, white mica from layer ore of the Zhenzigou deposit was formed in the process of remelting and re-precipitation of pre-existed minerals by hydrothermal metasomatism origined metamorphism (greenschist facies) associated with Paleoproterozoic intrusion. And compositional variations in white mica from the Zhenzigou deposit are caused by phengitic or Tschermark substitution [(Al³⁺)^VI+(Al³⁺)^IV <-> (Fe²⁺ or Mg²⁺)^VI+(Si⁴⁺)^IV] substitution during hydrothermal metasomatism depending on wallrock type, alteration degree and ore/gangue mineral occurrence frequency.

• Korean Journal of Agricultural Science
• /
• v.5 no.2
• /
• pp.93-114
• /
• 1978

The purpose of the study was to find out possible ways for increasing farm income through the sheep and Korean native goats farming, and to investigate meat productivity, wool productivity; woolskin utility, physiological characteristics and correlation between economical college animal farm of the Chungnam National University and sample farms in the suburbs of Dae jeon City were selected for feeding 20 heads of Corriedale wethers and another 20 heads Korean native kids as research materials for the periods of 5th May-26th November, 1977. The data such as growth rate, carcass, viscera weight, blood picture and plamsa components, hebage intake and economic traits were obtained and analysed. The result of the study are summarized as follows: 1. Meat production and quality 1) After 196days of feeding, the body weight of sheep and Korean native goats was increased by two times of those at the beginning of the trial, i.e. 20kg and 8kg respectively. 2) There was no significance of growth rates of sheep in housing and grazing. 3) The growth rate of Korean native goats were excellent at the mountainous areas of Gong ju-Gun where infectious diseases were not found 4) Accroding to the body measurements of 18-month-old sheep, percentages of hip height, body length, rump length, chest depth, chest width, hip width, chest girth and forearm circumference to the withers height were 103,%, 104%, 33%, 44%, 31%, 23%, 135% and 15% respectively, and those of hip height, body length, chest depth and chest girth of 8-month-old native goats to the withers height were 106%, 109%, 46% and 122,% respecitively. As a result, it was found that the percentage of hip height, body length and chest depth of Korean native goats were higher than those of sheep while that of the chest girth of goats was lower. 5) In the carcass data, 47, $52{\pm}2.27%$ of carcass percentage, $34.61{\pm}1.62%$ of lean meat, $26.07{\pm}2.51%$ of viscera, $9.75{\pm}1.4%$ of bone, and $20.95%{\pm}2.14%$ of woolskin for sheep, and $45.58{\pm}5.63%$ of carcass percentage, $27.62{\p}3.81%$ of meat, $34.86{\pm}4.16%$ of viscera, $11.66{\pm}1.83%$ of bone, $3.63{\pm}1.61%$ of skull and $9.26{\pm}2.41%$ of woolskin for native goats were obtained. 6) The contents of moisture, crude protein, crude fat and crude ash in native goat meat were much similar in both plots of housing and grazing. It was, however, known that the contents of moisture and protein were higher in grazinrg than in housing, while fat content was lower in grazing plots. 7) The weights of visceral organs shown similar tendency for both of sheep and native goats. For the weights of liver, heart, kidney and spleen, significance was not reconized among the treatments. Those of rumen, reticulum, small and large intestine were heavier in grazing than in housing, while the amount of visceral fat was heavier in housing. 2. Wool productivity and woolskin 1) The wool production of sheep for 7 months was $3.88{\pm}1.02kg$, and wool percentage, staple length, straighten length, wool growth per day and number of crimps were $9.27{\pm}1.48%$, 8. $47{\pm}1.00cm$, $10.63{\pm}0.99cm$, $0.40{\pm}0.04cm$ and $2.78{\pm}0.40$ respecitively. 2) The tensile strength and tear strength of woolskin treated by alum tanning were highest on the skin obtained from rump, i.e. $1,351kg/mm^2$ and $2,252kg/mm^2$ respectively, and they are in order of loin and shoulder. 3. Utilization and improvement of pasture. 1) The difference of herbage intake of native goats was not recognized between grazing and tethering, but the intake in the afternoon was s lightly higher than that in the morning. However the hervage intake of sheep was superior in grazing and in the afternoon. 2) The cultivation effect was lower in the native goat plots due to their cultivation abilities, in other words, the establishment rates of pasture by hoof cultivation were 60.25% in the goat plots and 77.35% in the sheep plots. 4. Correlation among economical traits. 1) The correlation between live weight of sheep and daily gain was higher. On the other hand, the correlation between other traits was not significant except that live weight, daily gain and lean meat percentage to the length of thoracic vertebrae. The live weight of native goats and meat production were highly correlated, and high correlation was also found between weights of carcass and meat. However, negative correlation was shown between viscera weight and live weight as well as daily gain. 2) The correlatoin between fleece weight of sheep and other traits such as live weight, daily gain and fleece percentage is very high at the 1% siginficant level, and this means that rapid-growth individuals can produce much fleece. 3) The correlation between the factors such as weights of live body, lean meat and viscera of sheep and body measurements, i. e. chest girth and body length was highest, and weights, of carcass and lean meat was highly correlated to chest width and depth. It will be therefore reasonable that the meat productivity estimates will have to be made on the basis of chest girth and body length. The meat production traits of native goats were highly correlated to the most of body measurement data, and the correlation coefficient between chest girth and weights of live body, carcass, lean meat and bone percentage was very high, i. e. 0.992-0.974 in particular. The correlations of meat production traits to chest depth, forearm circumference, body length were 0.759-0.911, 0.759-0.909 and 0.708-0.872 respectively. Therefore, the meat production of native goats will have to be estimated on the basis of chest data. 5. Blood picture and plasma components. 1) The number of erythrocyte and MCHC of native goats were $12.93{\times}10^6/mm^3$ and 36.14%, and those of sheep were $10.68{\times}10^6/mm^3$ and 36.26 respectively. The values of native goats were significantly higher than those of sheep. 2) The hemoglobin concentration, PVC, MCV and MCR of native goats were 10.92 g/100ml, $23.40{\mu}^3$ and 10.94 pg, and those of sheep were 11.73 g/100ml, 36.25 ml/100ml, $33.97{\mu}^3$ and 30.2 ml/100ml 8.43 pg respectively. The values of native goats were significantly lower those of sheep. 3) The number of leukocytes of native goats was significantly higher than that of sheep, that is, $11.64{\times}10^3/mm^3$ in native goats and $9.32{\times}10^3/mm^3$ in sheep. 4) In differential count of leukocyte, neutrophil was significantly high in native goats while lympocyte in sheep. On the other hand, the basophil, eosinophil and monocyte were not significant between native goats and sheep. 5) The amounts of total protein and glucose in the plasma of native goats were 6.2g/100ml and 53.6mg/100ml, and those of sheep were 5.6g/100ml and 45.7mg/100ml, which means that the values of native goats were significantly higher that those of sheep. The amount of total-lipid of native goats(127.6mg/100ml) was significantly than that of sheep(149.6mg/100ml). 6) The amount of non-protein nitrogen, cholesterol, Ca, P, K, Na and Cl were not different between native goats and sheep. 6. Economic analysis. 1) The gross revenue of a farm which fed native goats and sheep was 4,000won per head and the optimum size for feeding them in a farm as a subsidiary work is 5-10 heads. 2) Since there was no difference between housing and grazing, they can be fed in group for farm's subsidiary work. 3) They can be also fed by youths and house wives in the suburbs of cities, because labour requirement is estimated as only two hours per days for feeding 5 heads of native goats and sheep.