• 복식문화연구
• /
• 제13권3호
• /
• pp.439-451
• /
• 2005

This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.484-497
• /
• 2016

In order to understand the characteristics of the topography change in front of an impermeable breakwater, a coupled model for a two-way analysis of the existing LES-WASS-2D and newly developed morphodynamic model was suggested. A comparison to existing experimental results revealed that the results computed using the 2-D hydro-morphodynamic model were in good agreement with the experimental results for the wave form, pore water pressure in the seabed, and topographical change in front of a submerged breakwater. It was shown that the two-way model suggested in this study is applicable to a morphological change in the seabed around a submerged breakwater. Then, using the numerical results, the topographical changes in front of an impermeable submerged breakwater were examined in relation to partial standing waves. Moreover, the characteristics of the local scour depths in front of them are also discussed in relation to incident wave conditions, sediment qualities, and submerged breakwater shapes.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.328-332
• /
• 2011

The formation of front metal contact silicon solar cells is required for low cost, low contact resistance to silicon surface. One of the front metal contacts is Ni/Cu plating that it is available to simply and inexpensive production to apply mass production. Ni is shown to be a suitable barrier to Cu diffusion into the silicon. The process of Ni electroless plating on front silicon surface is performed using a chemical bath. Additives and buffer agents such as ammonium chloride is added to maintain the stability and pH control of the bath. Ni deposition rate is found to vary with temperature, time, utilization of bath. The experimental result shown that Ni layer by SEM (scanning electron microscopy) and EDX analysis. Finally, plated Ni/Cu contact solar cell result in an efficiency of 17.69% on $2{\times}2\;cm^2$, Cz wafer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.119-119
• /
• 2010

We report strong exciton transition and exciton-phonon couplings in photoluminescence (PL) of ZnO thin films grown on MgO/sapphire (buffer/substrate) by plasma-assisted molecular beam epitaxy. The PL spectra at 10 K showed the intensity of the dominant emission, donor-bound exciton transition of front surface (top surface, the latter part in growth) is found to be about 100 times higher than that of back surface (in-depth bottom area, the initial part), while the room temperature PL spectra showed dominant contributions from the free exciton emissions and phonon-replicas of free excitons for front surface and back surface, respectively, It could be attributed to the strong contributions of exciton-phonon coupling. Time resolved PL spectra reveal that the life time of exciton recombination from the front surface are longer than those from back surface. This is most probably due to the fact that reduction of non-radiative recombination in the front surface. This investigation indicates that the existence of native defects or trap centers which can be reduced by the proper initial condition in growth and the exciton-phonon interaction couplings play an important role in optical properties and crystal quality of ZnO thin films.

• 한국의류학회지
• /
• 제47권2호
• /
• pp.215-231
• /
• 2023

This study classifies short front long back skirts from the Joseon Dynasty by style type, identifies their formative characteristics based on their external morphological properties and internal composition, and examines their correlation with Korean thought. A literature review and empirical research were conducted for this study. The style of short front long back skirts is classified as inverted "b"-shaped, lower lip, wavy, trapezoid with a raised center hem, or half-circle. As such, this skirt possesses the formative properties of imbalance, variability of shape, intentional three-dimensionality, and confluence. In other words, with an imbalance resulting from the difference in length between the front and back, these skirts are characterized by variability in shape created by intentional three-dimensionality expressed as intentional three-dimensional beauty, the confluence of planes and dimensions, as well as of materials and colors. These properties are correlated with Korean ways of viewing the world. This study contributes to the development of Korean designs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.444-445
• /
• 2009

The metallic contact system of silicon solar cell must have several properties, such as low contact resistance, easy application and good adhesion. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. Nickel monosilicide(NiSi) has been suggested as a suitable silicide due to its lower resistivity, lower sintering temperature and lower layer stress than $TiSi_2$. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposit the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 16.446 % on $0.2\sim0.6\;{\Omega}{\cdot}cm$, $20\;\times\;20\;mm^2$, CZ(Czochralski) wafer.

• 한국의류학회지
• /
• 제36권9호
• /
• pp.940-951
• /
• 2012

This study evaluates the fit preference of the tailored jacket according to body types for 20's adult women through a comparison of real and virtual fit. A five point fit evaluation scale utilizing a wearer acceptability scale by Shen and Huck was used to evaluate the degree of the preference of real and virtual fit. This scale contained 23 items in three categories: front fit, back fit, and side fit. For each item, 5 responses from 'too tight' fit (1 point) to 'too loose' fit (5 point) were possible. The middle position for each fit criterion indicated a 'good' fit (3 point). The data were analyzed with a t-test using statistical program SPSS 17.0. According to the results, there were no significant differences ($p{\leq}.05$) between the real and virtual fit preference in total measurement items such as front collar, lapel and roll line, front shoulder slope, front armhole, front waist, abdomen, sideseam, hemline, front silhouette, side shoulder, side armhole, side sleeve width, side hip, side silhouette, back collar stand, upper back, back armhole, back waist, back hip, back silhouette except front bust, side waist, and back center back. The factor that caused a difference in the fit preference between the real and virtual fit evaluation was a specific body type such as Body Type A that indicated a small bust circumference and a big hip circumference.

• 한국해양학회지
• /
• 제6권1호
• /
• pp.25-36
• /
• 1971

대마난류 유역의 해양조사는 W st(1936), Tsujita(1957) 등이 보고한 바와 같이 1873년경 Schrenck, L.가 대마난류의 정체를 밝힌데서 시작된다. 한국 남해의 수리적 해황에 대해서는 Makaroff91915), Wada(1922), Nisida(1923, '24, '27, '28), Uda (1930, '31, '34a, '34b, '36, '50), Suda and Hidaka(1930a, '30b), Hidaka and Suzaki(1950), Miyazaki and Abe91960), Gong(1968), 그리고 Lee and Bong(1969)등, 여러사람에 의한 조사 보고가 있다. 한국 국립수산진흥원과 그 전신인 중앙수산 시험장은 제2차대전 후의 몇 년간의 공백을 제외하고는 매년 정기적으로 해양관측을 실시하여 어장환경요인을 해양조사년보와 해 어황속보를 통하여 어민에게 공표하여 왔다.(1935, '36ㅁ, '36ㅠ, '38, '42, '56, '64, '68, '70)

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.117-122
• /
• 2004

외양대류에 의한 심층수 형성과정의 초기단계 즉 침니 현상의 전 단계에 나타나는 현상을 포텐셜 와도, 지형류, 수온, 염분, 용존산소의 분포로부터 확인하였다. 포텐셜 와도의 분포에서 나타난 와동류는 Vladivostok 연안과 subpolar front 사이에 위치하며, 와동류의 분포 위치는 겨울철 심층수 형성 가능성이 높은 해역과 잘 일치한다. 대륙의 지형적인 특성으로 인한 바람장의 변화는 본 연구에서 나타난 시계반대방향의 와동류가 형성될 수 있음을 보여주며, 그 결과로 나타나는 dome구조의 밀도 분포는 외양대류의 초기단계에서 나타나는 현상을 잘 보여준다.

• ETRI Journal
• /
• 제27권5호
• /
• pp.484-490
• /
• 2005

We fabricated 40 Gb/s front-end optical receivers using spot-size converter integrated waveguide photodiodes (SSC-WGPDs). The fabricated SSC-WGPD chips showed a high responsivity of approximately 0.8 A/W and a 3 dB bandwidth of approximately 40 GHz. A selective wet-etching method was first adopted to realize the required width and depth of a tapered waveguide. Two types of electrical pre-amplifier chips were used in our study. One has higher gain and the other has a broader bandwidth. The 3 dB bandwidths of the higher gain and broader bandwidth modules were about 32 and 42 GHz, respectively. Clear 40 Gb/s non-return-to-zero (NRZ) eye diagrams showed good system applicability of these modules.