• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.435-443
• /
• 2009

Optimal duct design of a HVAC system requires analysis technology to accurately evaluate its pressure losses, flow rate and velocity for making a compromised design among fan capacity and duct size affecting initial manufacturing and operation costs, and noise induced by the HVAC system. In this paper, we carry out initial duct design using the equal friction method. Using the result, the T-method is applied for accurate analysis of flow rate. Then, the duct size is modified using the difference between the required and the calculated flow rate, which can guarantee required flow rate, reduce the pressure unbalance among duct paths and lead to select optimal fan performance. To verify the validity and effectiveness of the proposed design method, an example for HVAC system design including noise analysis is demonstrated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.191-195
• /
• 2006

우주 발사체의 성공적인 비행을 위해서는 로켓 엔진의 성능 분산 관리가 필수적이다. 양산되는 엔진의 성능편차를 정량적으로 예측하기 위한 해석을 수행하고 성능영향계수를 이용하여 보정에 필요한 차압을 산출하였다. 별도의 추력제어 시스템을 갖추지 않은 엔진의 진공 추력 분산은 +9.1%, -8.7%로 나타났으며 엔진 혼합비 오차는 +9.7%, -9.6%에 달했다. 보정에 필요한 요구차압은 동일한 혼합비 보정에 대해 연소기 배관 산화제 측에서 더 작게 나타났으나 가스발생기 배관의 요구차압은 더 크게 요구된다.

• 한국분무공학회지
• /
• 제12권3호
• /
• pp.146-153
• /
• 2007

The prediction of diesel spray penetration has been the subject of several works and intensive investigations are still underway by many researchers. It is required to summarize the correlations developed before 1990 days and to introduce the correlations reported recently in the literature. The existing zero-dimensional models for the prediction of diesel fuel spray penetration can be classified as theoretical and empirical correlations. Of various correlations, the models considered in this paper were selected as based on the evaluation results of previous reviews and the recently published works in the literature. The existing theoretical correlations can be classified into seven categories and the existing empirical ones as two categories in this review. According to the review of existing models, the dominating factors for the prediction of spray tip penetration are the spray angle, discharge coefficient, pressure drop across nozzle, ambient density and orifice diameter and time after the start of injection. Especially, the definition for the measurement of spray angle is different with researchers. It is required to evaluate the existing spray tip penetration models for the very high injection pressure and other fuel sprays such as DME. It is also required to evaluate the correlations for the prediction of diesel spray penetration with the connection of liquid-phase penetration.

• 항공우주기술
• /
• 제9권1호
• /
• pp.125-132
• /
• 2010

추진제가 배출되는 동안 추진제탱크를 적정 압력으로 유지하기 위해 필요한 가압가스의 질유량 및 총소모량을 파악하는 것은 가압제어시스템의 설계 및 가압제 저장탱크의 무게를 산출하는데 있어 매우 중요하다. 특히 극저온 추진제탱크의 경우 얼리지 내부의 가압가스는 외부와의 열전달에 의해 비체적이 감소하므로 더욱 많은 추진제탱크의 압력을 유지하기 위해 더 많은 가압가스를 필요로 한다. 이에 추진제탱크 얼리지 해석을 위한 기본모델을 만들어 얼리지 내부와 탱크벽면의 온도분포, 가압가스 소모량, 얼리지 내부에서 유입된 가압가스의 에너지 분포를 예측하였다. 현재 시험을 통한 프로그램의 수정보완이 진행되었으나, 본 자료에서는 기본적인 해석모델의 설명에 중점을 두었다.

• 센서학회지
• /
• 제24권4호
• /
• pp.239-246
• /
• 2015

Blood pressure is possible to diagnose a disease associated with blood pressure and judgment the current health of patients. Automatic blood pressure monitor capable of measuring a blood pressure easily in hospital and at home have become spread. In this study, we developed the blood pressure simulator (BPS) that can test the arm-type automatic blood pressure monitor that is commonly used in hospital. BPS is to produce a pressure similar to the pressure wave generated in the human blood using a servo disk motor. Then, using the silicon tube, it implements the situations such as human blood vessels, and to output the generated pressure waveform. Simply the BPS's phantom put on the cuff and it is able to simulate blood pressure. So anyone can quickly test the blood pressure monitor within one minute and it is possible to shorten the test time required for the automatic blood pressure monitor. In Performance test, the trends and the standard deviation of the values measured in the BPS is similar to the value of the measured pressure from people with normal blood pressure. Thus, the development BPS showed a possibility of taking into account the actual blood pressure measurement environment simulator.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.143-153
• /
• 2005

J.Y. CHOI,S. J. KIM, E. L. LEE. Change of plantar pressure Distribution of Open Stance during Forehand Strke in Tennis. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, PP. 143-153, 2005. Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and close stance and it is very important to know the patterns of plantar pressure distribution for the better understanding of forehand stroke. Therefore, the purpose of this study was to investigate the change of plantar pressure distribution in open stance during forehand stroke in tennis. Three high school tennis players were recruited for the study and required to perform forehand stroke five consecutive trials in the condition of open stance. The forehand strokes were filmed with two digital video cameras and measured with pedar system for plantar pressure. The plantar regions under the foot were divided into 3 regions, which were forefoot, midfoot, and rear foot. In conclusion, The plantar pressure of open stance during forehand stroke was distributed more largely to the right foot. The plantar pressure of open stance during forehand stroke was distributed more weight loads on forefoot of right than heel of right

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.285-290
• /
• 2006

자동차에 있어서 안전은 가장 중요한 설계 인자이다. 자동차 타이어 압력은 자동차 안전에 중요한 요소로 알려져 있다. 능동적 안전 측면에서, 타이어공기압검지장치(TPMS)는 아주 중요한 요소라 할 수 있다. RF 통신 기능을 갖고 타이어 내부에서 타이어 압력을 모니터링하는 장치는 광범위한 운전영역에서 정회한 압력을 검지하는 효과적 방법이다. 본 논문에서는 타이어 압력 및 온도보상 특성 관계를 조사하였다. 본 연구를 통하여, 차량 조건과 주행 변수를 고려한 TPMS 제어 로직의 가이드 라인을 설정할 수 있었다.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.602-607
• /
• 2017

This study was undertaken to compare the gait characteristics between the Korean elderly and young adults, we measured the plantar pressure and contact time of gait with barefoot along a walkway at their preferred walking speed. The results indicate that older people exhibited significantly less plantar pressure than young adult in all 3 regions (FF, MF and RF) and significantly less time % on the initial contact phase (ICP), forefoot push-off phase (FFPOP) and significantly more % forefoot contact phase (FFCP) and foot flat phase (FFP). The converted plantar pressure value to percentage, it showed more pressure in forefoot (FF) in the elderly person than the young adults. It could be explained that the forward shifting in plantar pressure are associated with a more flexed posture of elderly such as actual stabilizing fearrelated adaptations. Longer total foot contact time in the elderly means that the old people show the decreased gait velocity. In other words, lower velocity was found to be associated with pre-existing fear of falling. With longer contact time and slower stepping movement, the elderly become more unstable. With these findings, it could be confirmed that there were significant changes in foot characteristics which contribute to alter the plantar pressure and contact time during gait with advancing age. Further research is required to establish possible links to risk of falling and development of footwear in the elderly adults.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.65-71
• /
• 2009

축대칭 Navier-Stokes 방정식에 기반한 전산유체역학을 이용하여 고속철도차량 객실 내 압력변동을 평가하였다. 차량 내부의 압력변동은 차내 압력변화율과 차 내외부 압력변동의 선형 관계식에 근거한 1차 차분식을 이용하여 계산되었다. 전산해석 결과, 새로운 한국형 고속철도 차량이 경부고속선 터널을 330km/h로 통과할 시 발생하는 객실 실내압 변동은 해당 차량이 기밀도 국내기준을 만족한다고 가정하였을 시 철도차량의 실내압력변동 국내 기준치를 잘 만족하는 것으로 나타났다.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.47-52
• /
• 2010

The proper surface pressure on the pistons rings in the diesel engine of a ship is very important, because the pressure controls the oil that is needed to maintain friction at acceptable levels between the pistons and the cylinders. In this paper, basic and theoretical concepts to compute the ring pressure were formulated and applied to obtain the proper surface pressures on selected sample piston rings. During the calculation of the pressure on the piston rings, the computation of the accurate free shape of the piston ring was required. Earlier, Arnold and Prescott introduced theories to compute the free shapes of piston rings, and their approach used rectangular and polar coordinates. In this paper, the free shapes of piston rings using two different theories were computed and compared. The results were quite close, representing the free shape of the piston ring. Ring pressure was computed using the Arnold's free shape that was obtained. A simple GUI was made to compute the surface pressure on the piston rings.