• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.839-846
• /
• 2013

This paper describes a finite element model of the microstructure of dispersion type nuclear fuels, which can be used to determine the effective thermal conductivity of the fuels during irradiation. The model simulates a representative region of the fuel as a prism shaped unit cell made of brick elements. The elements within the unit cell are assigned material properties of either the fuel or the matrix depending on position, in such a way as to represent randomly distributed fuel particles with a size distribution similar to that of the as manufactured fuel. By applying an appropriate heat flux across the unit cell it is possible to determine the effective thermal conductivity of the unit cell as a function of the volume fraction of the fuel particles. The presence of a fuel/matrix interaction layer is simulated by the addition of a third set of material properties that are assigned to the finite elements that surround each fuel particle. In this way the effective thermal conductivity of the material may also be determined as a function of the volume fraction of the interaction layer. Work is on going to add fission gas bubbles in the fuel as a fourth phase to the model.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.38-38
• /
• 2023

Pleikrong reservoir with a concrete gravity dam that impound more than 1 billion cubic meter storage volume is one of the largest reservoir in Central Highland of Vietnam. Sedimentation is a major problem in this area and it becomes more severe due to the effect of climate change. Over time, it gradually reduces the reservoir storage capacity affecting to the reliability of water and power supply. This study aims to integrate the soil and water assessment tool (SWAT) model with 14 bias-corrected GCM/RCM models under two emissions scenarios, representative concentration pathway (RCP) 4.5 and 8.5 to estimate sediment inflow to Pleikrong reservoir in the long term period. The result indicated that the simulated total amount of sediment deposited in the reservoir from 2010 to 2018 was approximately 39 mil m³ which is a 17% underestimate compared with the observed value of 47 mil m³. The results also show the reduction in reservoir storage capacity due to sedimentation ranges from 25% to 62% by 2050, depending on the different climate change models. The reservoir reduced storage volume's rate in considering the impact of climate change is much faster than in the case of no climate change. The outcomes of this study will be helpful for a sustainable and climate-resilient plan of sediment management for the Pleikrongreservoir.

• 한국전산구조공학회논문집
• /
• 제31권3호
• /
• pp.133-140
• /
• 2018

본 논문은 $Ni-A{\ell}_2O_3$로 구성된 금속-세라믹 이종 입자복합재의 2차원 미세구조(microstructure) 생성과 미세구조 스케일(scale)에 따라 정의되는 계층적 모델들의 역학적 특성 분석에 관한 내용이다. 이종 입자복합재의 미세구조는 수학적인 MDF(random morphology description functions) 모델링기법을 복합재의 2차원 RVE(representative volume element) 영역에 적용하여 생성하였다. 그리고 미세구조 생성에 필요한 가우스 함수들의 개수에 따라 미세구조의 계층적 모델을 정의하였다. 한편 임의 미세구조 내 금속과 세라믹 입자가 차지하는 체적분율(volume fraction)은 RMDF 함수의 레벨을 조정함으로서 설정하였다. RMDF기법에 의한 미세구조들은 가우스 함수들의 개수가 일정할지라도 랜덤하게 생성된다. 이렇게 랜덤하게 생성되는 미세구조들을 2차원 보(beam) 모델에 적용하여 미세구조의 스케일에 따른 수직응력과 전단응력의 계층적 변동을 수치 해석적으로 고찰하였다. 또한, 균열해석을 통해 RMDF의 랜덤성과 가우스 함수들의 개수가 균열선단에서의 응력값에 미치는 영향을 고찰하였다.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.507-516
• /
• 2015

Debris flow is a representative natural disaster in Korea and occurs frequently every year. Recently, it has caused considerable damage to property and considerable loss of life in both mountainous and urban regions. Therefore, It is necessary to estimate the scope of damage for a large area in order to predict the debris flow. A response model such as the random walk model(RWM) can be used as a useful tool instead of a physics-based numerical model. RWM is a probability model that simplifies both debris flows and sedimentation characteristics as a factor of slopes for a subjective site and represents a relatively simple calculation method compared to other debris flow behavior calculation models. Although RWM can be used to analyzing and predicting the scope of damage caused by a debris flow, input variables for terrain conditions are yet to be determined. In this study, optimal input variables were estimated using DEM generated from the Aerial Photograph and LiDAR data of Mt. Umyeon, Seoul, where a large-scale debris flow occurred in 2011. Further, the deposition volume resulting from the debris flow was predicted using the input variables for a specific area in which the deposition volume could not be calculated because of work restoration and the passage of time even though a debris flow occurred there. The accuracy of the model was verified by comparing the result of predicting the deposition volume in the debris flow with the result obtained from a debris flow behavior analysis model, Debris 2D.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.165-170
• /
• 1997

In this paper, we consider the aortic sinus baroreceptor, which is the most representative baroreceptors sensing the variance of pressure in the cardiovascular system(CVS), and propose heart activity control model to observe the effect of delay time in heart period and stroke volume under the regulation of baroreflex in arotic sinus. The proposed heart activity baroreflex regulation model contains CVS electric circuit sub-model, baroreflex regulation sub-model and time delay sub-model. In these models, applied electric circuit sub-model is researched by B.C.Choi and the baroreflex regulation sub-model transforms the input, the arotic pressure of CVS electric circuit sub-model, to outputs, heart period and stroke volume by mathematical nonlinear feedback. We constituted the time delay sub-model to observe sensitivity of heart activity baroreflex regulation model by using the variable value to represent the control signal transmission time from the output of baroreflex regulation model to efferent nerve through central nervous system. The simulation object of this model is to observe variability of the CVS by variable value in time delay sub-model. As simulation results, we observe three patterns of CVS variability by the time delay. First, if the time delay is over 2.5 sec, arotic pressure, stroke volume and heart rate is observed nonperiodically and irregularly. Second, if the time delay is from between 0.1 sec and 0.25 sec, the regular oscillation is observed. Finally, if time delay is under 0.1 sec, then heart rate and arotic pressure-heart rate trajectory is maintained in stable state.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.11-11
• /
• 2009

본 연구는 MLCC 제조공정중 그린상태에서의 강도를 유지하기 위한 고분자 바인더의 거동을 예측하고, 제조공정중 나타난 가열후 수축 현상을 규명하고자 하였다. 이를 위해 메커니즘에 대한 가설을 수립하고 이를 여러가지 분석기법과 컴퓨터 시뮬레이션을 통해 확인하였으며, 현장의 제조기술 부문에서 용이하게 사용할 수 있도록 간단한 수학적 모델링으로 표현하였다. 수학적 모델링은 제품을 이용한 실험과 비교하여 정확도를 검증하였으며, 이러한 해석기법은 대표체적요소(representative volume element)을 이용하여 MLCC 그린바 (Bar)의 해석까지 가능하도록 응용범위를 향상시켰다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.137-143
• /
• 2020

With the development of information and communication technology, various data have appeared and are being distributed. The use of various data has contributed to the enrichment and convenience of our lives. Data in the public areas is also growing in volume and being actively used. Public data in the field of education are also used in various ways. As the distribution and use of public data has increased, advantages and disadvantages have started to emerge. Among the various disadvantages, the privacy problem is a representative one. In this study, we deal with the privacy issues of public data in education. First, we introduce the privacy issues of public data in the education field and suggest various solutions. The various solutions include the expansion of privacy education opportunities, the need for a new privacy protection model, the provision of a training opportunity for privacy protection for teachers and administrators, and the development of a real-time privacy infringement diagnosis tool.

• 콘크리트학회논문집
• /
• 제15권1호
• /
• pp.155-161
• /
• 2003

This paper presents experimental and analytical results of glass fiber-reinforced concrete (GFRC) and polypropylene fiber-reinforced concrete (PERC) to investigate the relationship between tensile strength and compressive strength based on the split cylinder test (ASTM C496) and compressive strength test (ASTM C39). Experimental studies were performed on cylinder specimens having 150 mm in diameter an 300 mm in height with two different fiber contents (1.0 and 1.5％ by volume fraction) at ages of 7, 28 and 90 days. A total of 90 cylinder specimens were tested including specimens made of the plain concrete. The experimental data have been used to obtain the relationship between tensile strength and compressive strength. A representative equation is proposed for the relationship between tensile strength and compressive strength of fiber-reinforced concrete (FRC) including glass and polypropylene fibers. There is a good agreement between the average experimental results and those calculated values from the proposed equation.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.429-436
• /
• 1995

This paper describes a methodology for determination of representative CANDU feeder geometry and the pressure drops between inlet/outlet header and fuel channel in the primary loop. A code, MEDOC, was developed based on this methodology and helps perform a calculation of equivalent feeder geometry for a selected channel group on the basis of feeder geometry data (fluid volume, mass flow rate, loss factor) and given property data pressure, quality, density) at inlet/outlet header. The equivalent feeder geometry calculated based on this methodology will be useful fur the transient thermohydraulic analysis of the primary heat transport system for the CANDU heavy water-cooled pressure tube reactor.