• 제목/요약/키워드: replacement materials

검색결과 827건 처리시간 0.032초

승모판막질환에 동반된 심방세동에서 Cox-Maze 술식 (The Cox-Maze Procedure for Atrial Fibrillation Concomitant with Mitral Valve Disease)

  • 김기봉;조광리;안혁
    • Journal of Chest Surgery
    • /
    • 제31권10호
    • /
    • pp.939-944
    • /
    • 1998
  • 연구배경 : 심장의 구조적 이상을 동반하지 않는 만성 심방세동에 대한 Cox-Maze 술식의 성적은 매우 좋은 것으로 보고되고 있으나 승모판막 질환과 같은 기질적 심장질환에 동반된 심방세동에서의 성적은 다소 떨어지는 것으로 보고되고 있다. 대상 및 방법 : 본 서울대학교병원 흉부외과학 교실에서는 승모판막 질환에 대한 수술과 함깨 시행한 Cox-Maze 술식의 효과와 안전성을 평가하기위해 1994년 4월부터 1997년 10월까지 경험한 70례(남;23, 여;47)를 대상으로 임상 연구를 하였다. 결과 : 70례중 67례가 류마티스성 승모판막 질환이었으며 3례가 퇴행성 질환이었다. 술전 심방세동의 평균 유병기간은 66$\pm$70개월이었다. 15명의 환자에서 과거력상 혈전색전증의 병력이 있었으며 24명의 환자에서 수술중 좌심방내의 혈전이 존재하였다. 과거에 조직판막을 이용한 판막치환술의 병력이 있었던 재수술례가 12례였다. 수술시 대동맥차단시간은 평균 151$\pm$44분이었으며 심폐우회시간은 평균 246$\pm$65분이었다. Cox-Maze 술식과 함께 시행한 수술로는 승모판막 치환술이 19례,승모판막과 대동맥판막 치환술이 14례, 승모판막 치환술과 삼첨판막륜 성형술이 8례, 승모판막 치환술 및 대동맥판막 성형술이 3례있었으며 11례에서는 승모판막 성형술이 가능하였다. 판막치환술과 관상동맥우회술을 같이 시행한 례가 3례있었으며 승모판막 재치환술이 10례, 승모판막 및 대동맥 판막 재치환술이 2례 있었다. 수술사망률은 1.4%(1/70)였다. 수술후 합병증으로는 술후 일시적 심방세동의 재발을 보인 례가 44례였으며 상심실성 빈맥이 10례, 저심박출증후군이 4례, 출혈에 의한 재수술이 4례있었다. 그 밖의 합병증으로는 급성 신부전이 1례, 수술전의 일측 편마비가 악화된 경우가 1례, 그리고 일시적 섬망이 1례 있었다. 생존한 모든 환자를 평균 16.4개월간 외래를 통한 추적관찰하였는데 동기능부전 증후군과 빈맥-서맥 증후군을 보인 2명의 환자에서 영구형 심박동기의 삽입이 필요하였고, 2례만이 현재 심방세동을 보이고 있어서 동율동으로의 전환율은 94.2%였다. 수술만으로 심방세동이 조절되었던 경우가 73.9% 이었고, 수술후 항부정맥제의 병행 투약이 필요했던 경우가 20.3% 이었다. 술후 심방수축력과 기타 심기능의 평가를 위하여 시행한 경흉부 심초음파 검사 소견상 우심방 수축력은 92%에서, 좌심방 수축력의 회복은 53%에서 관찰되었다. 판막재치환술을 시행한 환자들을 첫 수술인 환자들과 비교하였을 때, 심방세동의 유병기간은 재수술한 례에서 통계적으로 유의하게 길었으나 대동맥차단시간, 심폐우회시간, 수술당일의 출혈량, 동율동으로의 전환율등에서는 차이가 없었다. 결론 : 결론적으로 승모판막 질환에 대한 수술과 함께 시행한 Cox-Maze 술식은 비교적 낮은 수술위험도 하에서 높은 동율동 전환률을 보였으며 특히 재수술시에도 비교적 안전하며 매우 효과적이었다.

  • PDF

반복적 대화식 통합 탄성파 속도분석 (An Iterative, Interactive and Unified Seismic Velocity Analysis)

  • 서상용;정부흥;장성형
    • 지구물리와물리탐사
    • /
    • 제2권1호
    • /
    • pp.26-32
    • /
    • 1999
  • 탄성파 속도분석법은 일괄식 속도분석법과 대화식 속도 분석등 두 가지가 있다. 일괄식 속도분석법에서는 각 속도 분석점마다 셈블런스 컨투어, 슈퍼게더 및 중합 패널등을 일괄 작성하여 도면화 시킨 후 분석자가 그 도면을 보고 속도 함수를 결정하는 방법이다. 과거 유행한 전산처리 소프트웨어들이 이 방법을 사용하고 있다. 그러나 이 방법은 도면 분석시 아주 많은 수작업이 필요하고 속도분석 결과도 정밀치 못하다는 단점이 있다. 최근에는 워크스테이션의 고속 그래픽 기능을 이용한 대화식 속도분석 기술이 개발되었다. 그런데 이들 프로그램은 기존 일괄식 속도분석법과 대동소이한 내용을 그래픽 화면으로 처리할 수 있도록 함으로써 종이 절약 외에는 특별히 나아진 것이 없다. 프로그램의 주 기능은 속도 스펙트럼에서 속도점 노드를 선택하는 것이며, 입력자료에 있을 수 있는 잡음을 제거하여 다시 속도 스펙트럼을 수정하는 기능은 없다. 잡음의 제거없이 계산한 부정확한 속도 스펙트럼을 이용해서 속도 함수를 선정한다면 정밀 속도분석은 불가능할 것이다. 방대한 탄성파 탐사자료에 대한 속도분석을 신속 정확하게 수행하기 위해서는 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 통합된 반복적 대화식 속도분석 프로그램이 필요하다. 분석 구간의 속도와 뮤트함수를 변화시켰을 때 그로부터 얻어지는 셈블런스와 동보정 및 중합을 검토하고 이러한 수정과 검토를 신속히 반복할 수 있도록 함으로써 정확한 속도분석이 가능하기 때문이다. 여기에서는 속도분석을 신속 정확하게 수행하기 위해 속도 분석과 밀접한 관련이 있는 전산처리 공정들 즉, 슈퍼게더 조립, 셈블런스 계산, 동보정, 뮤트, 중합등을 동시에 지원하는 대화식 속도분석 프로그램 xva를 작성하였다. 대화식 속도분석에서는 분석 구간의 트레이스들을 고속으로 참조해야 하는데 이를 위해 간단한 트레이스 인덱스 파일을 설계하여 사용하였다. 직접파와 굴절파등 천부 잡음을 제거하기 위한 효과적인 수단인 뮤트 함수 영역 변환법을 새로 고안하였으며, 본 프로그램은 이 기법을 이용하고 있다. 본 영 역 변환법은 기존 알려진 역동보정법과 같이 정밀 전산처리가 가능할 뿐만 아니라 동보정과 역동보정시 발생하는 자료의 내삽 오차가 없으며 계산 시간이 크게 단축되기 때문에 정밀 대화식 속도 분석에 사용 가능하다. 프로그램 xva는 28개의 소스 파일로 구성된 패키지인데 줄 수는 12,029, 단어 수는 34,990, 글자 수는 304,073이다. 프로그램 xva는 X-Window와 Motif 환경하에서 작동한다. 프로그램 메뉴는 Motif 표준 스타일에 따라 작성하였는 바 그 사용법을 간략히 기술하였다. 본 프로그램이 완성됨으로 인하여 정밀 탄성파 속도 분석이 가능하게 되었고 그 결과 가스층의 존재 여부를 직접 확인할 수 있는 AVO(Amplitude Versus Offset)단면도등의 제작에 활용할 수 있었다.

  • PDF

APPLICATION OF FUZZY SET THEORY IN SAFEGUARDS

  • Fattah, A.;Nishiwaki, Y.
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
    • /
    • pp.1051-1054
    • /
    • 1993
  • The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

  • PDF

콘크리트 포장에서 FRP 튜브 다웰바의 역학적 특성 분석 (Structural Analysis of Concrete-filled FRP Tube Dowel Bar for Jointed Concrete Pavements)

  • 박준영;이재훈;손덕수
    • 한국도로학회논문집
    • /
    • 제13권3호
    • /
    • pp.21-30
    • /
    • 2011
  • 콘크리트 포장의 다웰바는 교통하중을 줄눈 넘어 인접한 슬래브로 전달하는 하중전달장치이다. 현재 국내에서 사용되는 다웰바는 원형봉강으로 교통하중과 환경하중으로 인해 반복적으로 발생하는 전단응력과 휨응력에 대해 높은 내구성을 갖고 있다. 그러나, 강재 다웰바는 장기간 공용시 줄눈틈, 포장 하부 등으로 침투한 수분으로 인해 부식이 발생한다. 특히, 겨울철에 사용되는 제설용 염수와 접촉할 경우 부식은 급격히 진행된다. 다웰바에 부식이 발생하면 부피가 증가하여 줄눈의 거동을 방해하며 유효단면적의 감소로 하중전달효과가 떨어질 수 있다. 이와 함께 지속적인 원자재 가격의 상승으로 강재 다웰바의 가격 경쟁력이 크게 낮아지고 있다. 이러한 강재 다웰바의 문제점은 새로운 재료를 사용한 대체 다웰바의 개발로 이어지고 있다. 본 연구에서는 높은 인장강도, 높은 내부식성을 갖춘 FRP(fiber reinforced plastic)를 튜브 형태로 제작하고 그 속을 고강도 무수축 모르타르로 충진한 FRP 튜브 다웰바에 대한 역학적 두께 설계를 실시하였다. 역학적 두께 설계의 기준으로 다웰바와 콘크리트 면 사이에 발생하는 지압응력을 사용하였다. 지압응력의 산정을 위하여 다웰바에 전달되는 교통하중을 이론식과 유한요소해석을 통해 산출하고 실내시험을 통해 FRP 튜브 다웰바의 물성을 측정하였다. 그 결과, 직경 32mm, 40mm FRP 튜브 다웰바 모두 지압응력 기준을 만족하는 것으로 나타났다. 국내 콘크리트 포장은 콘크리트 슬래브 하부에 강성이 큰 린 콘크리트층을 사용하기 때문에 다웰바에 전달되는 교통하중이 적고 이로 인해 지압응력도 낮아져 상대적으로 적은 직경의 FRP 튜브 다웰바의 사용이 가능한 것으로 판단된다.

백서 두개골결손모델에서 실크단백과 골형성단백 이식체가 골재생에 미치는 영향 (The effect of silk fibroin and rhBMP-2 on bone regeneration in rat calvarial defect model)

  • 남정훈;노경록;방은오;유우근;강응선;권해용;김성곤;박영주
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제36권5호
    • /
    • pp.366-374
    • /
    • 2010
  • Introduction: This study evaluated the capability of silk fibroin (SF) and recombinant human bone morphogenetic protein-2 loaded SF (SF-BMP) as a bone defect replacement matrix when grafted in a calvarial bone defect of rats in vivo. Materials and Methods: A total 70 calvarial critical size defects (5.0 mm in diameter) made on 35 adult female Sprague-Dawley rats were used in this study. The defects were transplanted with (1) rhBMP-2 loaded silk fibroin graft (SF-BMP: 0.8+$10\;{\mu}g$), (2) Silk fibroin (SF: $10\;{\mu}g$), and (3) no graft material (Raw). The samples were evaluated with soft x-rays, alkaline phosphatase activity, calcium/phosphate quantification, histological and histomorphometric analysis at postoperative 4 and 8 weeks. Results: The SF-BMP group ($48.86{\pm}14.92%$) had a significantly higher mean percentage bone area than the SF group ($24.96{\pm}11.01%$) at postoperative 4 weeks.(P<0.05) In addition, the SF-BMP group ($40.01{\pm}12.43%$) had a higher % bone area at postoperative 8 weeks than the SF group ($33.26{\pm}5.15%$). The mean ratio of gray scale levels to the host bone showed that the SF-BMP group ($0.67{\pm}0.08$) had a higher mean ratio level than the SF group ($0.61{\pm}0.09$) at postoperative 8 weeks. These differences were not statistically significant.(P=0.168 and P=0.243, respectively) The ratio of the calcium and phosphate contents of the SF-BMP ($0.93{\pm}0.22$) group was lower than that of the SF ($1.90{\pm}1.42$) group at postoperative 4 weeks. However, the SF-BMP group ($0.75{\pm}0.31$) had a higher Ca/$PO_4$ ratio than the SF ($0.68{\pm}0.04$) at postoperative 8 weeks. These differences were not statistically significant.(P=0.126 and P=0.627, respectively) For the bone-specific alkaline phosphatase (ALP) activity, which is recognized as a reliable indicator of the osteoblast function, the SF-BMP ($23.71{\pm}8.60\;U/L$) groups had a significantly higher value than the SF group ($12.65{\pm}6.47\;U/L$) at postoperative 4 weeks.(P<0.05) At postoperative 8 weeks, the SF-BMP ($21.65{\pm}10.02\;U/L$) group had a lower bone-specific ALP activity than the SF group ($16.72{\pm}7.35\;U/L$). This difference was not statistically significant.(P=0.263) For the histological evaluation, the SF-BMP group revealed less inflammation, lower foreign body reactions and higher bone healing than the SF group at postoperative 4 and 8 weeks. The SF group revealed more foreign body reactions at postoperative 4 weeks. However, this immunogenic reaction decreased and the remnant of grafted material was observed at postoperative 8 weeks. For histomorphometric analysis, the SF-BMP group had a significantly longer bone length to total length ratio than those of the SF group at postoperative 4 and 8 weeks.(P<0.05) Conclusion: The rhBMP-2 loaded silk fibroin graft revealed fewer immunoreactions and inflammation as well as more new bone formation than the pure silk fibroin graft. Therefore, silk fibroin may be a candidate scaffold for tissue engineered bone regeneration.

국산원료(國産原料)를 활용(活用)한 복합분(複合粉) 및 제품개발(製品開發)에 관(關)한 연구(硏究) - 제 2 보 복합분(複合粉)을 이용(利用)한 제빵시험(試驗) - (Development of Composite Flours and Their Products Utilizing Domestic Raw Materials - II. Bread-making Test with Composite Flours -)

  • 김형수;김용휘;우창명;이서래
    • 한국식품과학회지
    • /
    • 제5권1호
    • /
    • pp.16-24
    • /
    • 1973
  • 국산원료(國産原料)를 활용(活用)한 복합분(複合粉)으로 빵을 만들고 그들의 품질(品質)을 조사한 바 다음과 같은 결과를 얻었다. 1) 보리빵의 제조(製造)에 있어서, 표준 밀가루빵(speciffic loaf volume, SLV : 3.3)과 동일(同一)한 formula로 제조(製造) 할 때, 그 SLV 는 1.3(물 100%)으로 아주 낮았으나 탈지대두분(脫脂大豆粉)을 10% 혼합(混合)하면 1.7(물 100%)로 증가하였다. 한편 분질개량(粉質改良)을 위한 여러 가지 첨가제중(添加劑中)에서 1.5% GMS + 0.5% CSL 의 경우가 가장 우수하였다. (SLV : 2.0, 물 100%) 이에 다시 밀가루를 혼합(混合)하면 가장 효과적(效果的)이었는 바, 보리가루의 25%를 밀가루로 대체하면 그 SLV 는 2.8(물 90%)로, 50%의 경우는 3.2(물 90%)로 증가하여 표준빵과 비슷하였으며, 빵색깔도 우수하였다. 2) 고구마빵은 baking이 끝나면 흑갈색으로 되는것이 특징(特徵)이고 탈지대두분(脫脂大豆粉) 20%를 혼합(混合)하면 그 loaf volume이 증가하며 결착제(結着劑)로서 GMS + CSL의 첨가(添加)는 효과적(效果的)이었다. (SLV : 1.9, 물 100%) 고구마가루 복합분에 밀가루를 25%와 50%수준(水準)으로 혼합(混合)하면 그 SLV는 각각(各各) 2.3, 2.6(물 90%)으로 증가하고 빵색깔이 연해지며 빵조직(組織)이 개선되었다. 3) 감자가루를 주원료(主原料)로 한 제빵은 그 분질(粉質)이 고구마가루와는 다르고 GMS + CSL의 첨가(添加) 효과가 낮았다. 옥수수가루에 의한 제빵은 쌀보리가루와는 상이한 경향이었으며, 탈지(脫脂)쌀겨가루는 제빵 원료(原料)로서 부적당하였다. 4) 원료(原料) 공급(供給)면에서 전망(展望)이 보이는 쌀보리가루와 고구마가루를 주원료(主原料)로 한 5종(種)의 복합분(複合粉), 즉 (1) 쌀보리가루+탈지대두분+밀가루 (45 : 10 : 45) (2) 쌀보리가루+탈지대두분+밀가루 (67.5:10:22.5) (3) 쌀보리가루+탈지대두분 (90 : 10) (4) 고구마가루+탈지대두분+밀가루 (40 : 20 : 40) (5) 고구마가루+탈지대두분+밀가루 (60 : 20 : 20) 으로 첨가제를 넣고 제빵한 후, 밀가루빵을 표준(So)으로 하여 관능시험(官能試驗)한 결과(結果), 평균점(平均點)의 서열은 So>(1)>(2)>(3)>(5)>(4) 이었고, Duncan's multiple range test 의 결과 (1)의 빵, 즉 보리가루와 밀가루를 동량(同量)섞고 여기에 탈지대두분(脫脂大豆粉)을 10% 혼합한 복합분(複合粉)을 주원료(主原料)로 한 빵은 그 색깔, 조직(組織), 및, 향기(香氣)등의 종합평가(綜合評價)에 있어서 밀가루빵과 유의차(有意差)가 없었다.

  • PDF

서울시 마포구 관내 어린이집 및 초등학교에서 집단 발병한 세균성 이질 (Outbreak of Shigellosis Occurred in a Preschool and Two Elemetary Schools in Mapo-Gu, Seoul)

  • 박태수;이호준;김수연;이동우;김재윤;백지나;박유미;박미선;이복권
    • Pediatric Infection and Vaccine
    • /
    • 제13권1호
    • /
    • pp.71-77
    • /
    • 2006
  • 목 적 : 세균성 이질은 1998년 이후로 발생률이 증가하는 추세에 있고 그 발생이 주로 집단시설 생활자, 학교 단체급식 등을 통해서 이루어지고 있다. 집단 발병한 세균성 이질을 통해 발병양상과 임상경과를 알아보고자 하였다. 방 법 : 2005년 10월부터 11월 사이에 국립의료원 소아과에 입원했던 세균성 이질환자 및 유사환자 모두 32명 대상으로 감염원, 역학, 미생물 검사 및 PFGE 검사를 하였다. 결 과 남아가 17명, 여아가 15명으로 환아들의 연령은 생후 5개월부터 12세까지 연령분포를 보였으며 평균나이는 6.5세였다. 임상 증상은, 설사는 이질환자에서 22명 유사환자에서 7명, 열은 이질환자에서 18명, 유사환자에서 3명, 무증상인 경우도 이질환자에서 1명, 유사환자에서 1명 있었다. 임상증상 지속시간은 대개 3~4일 정도로 짧았고, 직장채변 대변배양검사에서 모두 S. sonnei가 배양되었고 ampicillin, streptomycin, gentamicin, nalicidic acid, TMP/SMX에 내성을 보였으며 3세대 cephalosporin에 감수성을 보였다. 환아들의 치료는 전해질 및 수분공급의 보존적 치료와 함께 3세대 cephalosporin으로 항생제 치료를 병행한 후, 증상이 호전되었으며 직장채변 대변 배양검사에서 이질균 음성으로 나왔다. 이번의 세균성 이질의 집단 유행에서 관내 어린이집의 음식물 검사 및 음용수검사 등에서 감염원은 찾지 못하였다. 세균성 이질로 확진된 24례의 환자 중 3세대 cephalosporin에 감수성이 있는 것으로 알려진 3례에서 cefixime 투여 후에도 직장채변 대변배양검사에서 계속 균이 배양되어 Imipenem으로 대체하여 6일간 투여 후 시행한 연속 3회의 대변배양검사에서는 이질균이 검출되지 않았다. 결 론 : 서울시내 세균성 이질균의 집단 발병의 감염원은 발견되지 않았고, 어린이집과 2차 감염에 의해 초등학교 및 그 가족으로 전파가 이루어졌던 것으로 추정되며, 항생제 감수성 검사와 PFGE 결과에 의하면 같은 균주로 판명되었다. 환아들은 3세대 Cephalosporin 치료 후 대부분 호전되었고 3례만 Imipenem을 추가로 투여하여 치료하였다.

  • PDF

임대주택단지의 생활안전 위해요인 해소방안 (Resolution Method of Hazard Factor for Life Safety in Rental Housing Complex)

  • 손정락;조건희;김진원;송상훈
    • 토지주택연구
    • /
    • 제8권1호
    • /
    • pp.1-11
    • /
    • 2017
  • The government has been constructing and supplying public rental housing to ordinary people in order to stabilize housing since 1989. However, the public rental houses initially supplied to ordinary people are at high risk for safety accidents due to the deterioration of the facilities. Therefore, this study is aimed to propose a solution to solve the life safety hazards of the old rental housing complex as a follow-up study of Analysis of Accident Patterns and Hazard Factor for Life Safety in Rental Housing Complex. Types of life safety accidents that occur in public rental housing complexes are sliding, falling, crash, falling objects, breakage, fire accidents, traffic accidents and criminal accidents. The types of safety accidents that occur in rental housing complexes analyzed in this study are sliding, crashes, falling objects, and fire accidents. Although the incidence of safety accidents such as falling, breakage, traffic accidents and crime accidents in public rental housing complexes is low, these types are likely to cause safety accidents. The method of this study utilized interviews and seminar results, and it suggested ways to solve the life safety hazards in rental housing complexes. Interviews were conducted with residents and managers of rental housing complexes. Seminars were conducted twice with experts in construction, maintenance, asset management, housing welfare and safety. Through interviews and seminars, this study categorizes the life safety hazards that occur in rental housing complexes by types of accidents and suggests ways to resolve them as follows. (1) sliding ; use of flooring materials with high friction coefficient, installation of safety devices such as safety handles, implementation of maintenance, safety inspections and safety education, etc. (2) falling ; supplementation of safety facilities, Improvement of the design method of the falling parts, Safety education, etc. (3) crash ; increase the effective width of the elevator door, increase the effective width of the lamp, improve the lamp type (U type ${\rightarrow}$ I type), etc. (4) falling objects and breakage ; design of furniture considering the usability of residents, replacement of old facilities, enhancement of safety consciousness of residents, safety education, etc. (5) fire accidents ; installation of fire safety equipment, improvement by emergency evacuation, safety inspection and safety education, etc. (6) traffic accidents ; securing parking spaces, installing safety facilities, conducting safety education, etc. (7) criminal accidents; improvement of CCTV pixels, installation of street lights, removal of blind spots in the complex, securing of security, etc. The roles of suppliers, administrators and users of public rental housing proposed in this study are summarized as follows. Suppliers of rental housing should take into consideration the risk factors that may arise not only in the design and construction but also in the maintenance phase and should consider the possibility of easily repairing old facilities considering the life cycle of rental housing. Next, Administrators of rental housing should consider the safety of the users of the rental housing, conduct safety checks from time to time, and immediately remove any hazardous elements within the apartment complex. Finally, the users of the rental housing needs to form a sense of ownership of all the facilities in the rental housing complex, and efforts should be made not to cause safety accidents caused by the user's carelessness. The results of this study can provide the necessary information to enable residents of rental housing complexes to live a safe and comfortable residential life. It is also expected that this information will be used to reduce the incidence of safety accidents in rental housing complexes.

방사성 옥소 치료 후 분화된 갑상선암 추적관찰에서 Thallium-201 스캔, Tc-99m MIBI 스캔과 I-131 스캔 검사 결과의 비교 (Comparison of Thallium-201, Tc-99m MIBI and I-131 Scan in the Follow-up Assessment after I-131 Ablative Therapy in Differentiated Thyroid Cancer)

  • 권재성;이성근;김도민;박세종;장경순;김은실;김종순
    • 대한핵의학회지
    • /
    • 제33권6호
    • /
    • pp.493-501
    • /
    • 1999
  • 목적 : 분화된 갑상선암에서 암 절제술 및 방사성 옥소 치료 후 추적관찰 중 재발이나 전이병소를 찾기 위한 효과적인 검사 방법에 대한 자료를 제시하고자 T1-201 스캔, Tc-99m MIBI 스캔, I-131 스캔 검사의 결과를 비교하였다. 대상 및 방법: 분화된 갑상선암으로 진단되어 수술 및 방사성 옥소로 치료 후 추적관찰 중 국소 재발 또는 전이로 생각되어 한번이상의 방사성 옥소 재 치료를 시행한 20명(총 33예)의 환자를 대상하여 T1-201 스캔, Tc-99m MIBI 스캔, 진단적 및 치료적 I-131 스캔을 시행하여 각 스캔에서 결과를 후향적으로 분석하였다. 모든 환자에서 갑상선글로불린을 측정하였고 임상적, 방사선학적, 조직학적 검사로 암의 재발 및 전이를 확인하였다. 결과: 4가지 검사의 비교에서 병소를 발견할 수 있는 양성률은 Tc-99m MIBI 스캔, T1-201 스캔, 진단적 I-131 스캔, 치료적 I-131 스캔에서 각각 70% (19/27), 54% (15/28), 35% (17/48), 63% (30/48)였다. T1-201 스캔과 I-131 스캔을 같이 시행한 군(20 예, 28병소)에서는 병소의 양성률은 치료적 I-131 스캔, T1-201 스캔, 진단적 I-131 스캔 순으로 높았으나(71%, 54%, 36%), T1-201 스캔과 진단적 I-131 스캔간의 차이는 없었다(p>0.05). Tc-99m MIBI 스캔을 I-131 스캔과 같이 시행한 군(20예, 27병소)에 서는 Tc-99m MIBI, 치료적 I-131 스캔, 진단적 I-131 스캔의 순으로 높았고(70%, 52%, 33%), Tc-99m MIBI는 진단적 I-131 스캔보다 양성률이 유의하게 높았다(p<0.05). 결론: 분화된 갑상선암 환자의 치료 후 추적 관찰에서 국소 재발 및 전이 병소를 찾는데 Tc-99m MIBI 스캔은 진단적 I-131 스캔보다 우수하였다. 따라서 치료 전에 진단적 I-131 스캔을 시행하기보다는 갑상선 호르몬제를 중단하지 않은 상태에서 Tc-99m MIBI 스캔을 시행한 후 결과에 따라서 치료용량의 방사성 옥소를 투여하고 치료적 I-131 스캔을 하는 것이 효과적일 것으로 사료된다.

  • PDF

관상동맥우회술의 조기 성적에 대한 임상적 고찰 (Clinical Analysis to the Early Results of the CABG)

  • 김대식;양진영;구원모;문승철;이건;이헌재;임창영
    • Journal of Chest Surgery
    • /
    • 제31권11호
    • /
    • pp.1043-1048
    • /
    • 1998
  • 연구배경 : 허혈성심질환 환자가 증가함에 따라 저자들은 관상동맥우회술을 시행한 환자의 치료 및 관리에 도움이 되고자 조기 성적 및 합병증 발생에 영향을 줄 수 있는 위험인자에 대하여 임상분석을 하였다. 재료 및 방법 : 1996년 6월부터 1998년 2월까지 관상동맥우회술을 시행받은 환자 42명의 연령, 성별, 술전 심박구출률, Canadian heart classification, 허혈성심장질환의 위험 인자, 술전 관상동맥 조영술 소견, 내흉동맥 사용 유무, 이식 혈관 수, 체외순환시간 등과 합병증 발생과의 상관관계에 대하여 분석하였고 생존 및 사망률, 사망원인에 대하여 조사하였다. 결과 : 술후 합병증은 17명에서 발생하였다. 합병증이 발생한 군의 평균연령은 61$\pm$11.9세로 발생하지 않은 군의 평균 연령 51세$\pm$10.5에 비해 유의하게 높았다(p=0.004). 체외순환 시간은 합병증이 발생한 군은 198$\pm$42.5분, 발생하지 않은 군은 158$\pm$47.4분으로 유의한 차이를 보였다(p=0.008). 그 외의 인자들은 통계학상 유의한 차이가 없었다. 평균 추적 조사 기간은 12.5개월이었으며 수술사망을 제외한 모든 환자에서 생존이 확인되었다. 수술사망은 2명(4.7%)이었고 그 중 1명은 대동맥판막치환술을 같이 시행받았던 환자로 술후 다발성 장기 기능부전으로 사망했고 또 다른 1명은 술후 폐렴, 창상감염 및 패혈증으로 사망하였다. 결론 : 본 연구의 결과 환자의 연령과 체외순환시간이 관상동맥우회술후 합병증 발생에 위험인자로 작용하며, 그 외의 인자는 관계가 없는 것으로 나타났다.

  • PDF