• 한국염색가공학회지
• /
• 제17권6호
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.97-104
• /
• 2023

본 논문은 지향성 스피커를 이용한 유해조류 퇴치 시스템을 제안한다. 유해조류 퇴치를 위한 기존 사운드 시스템은 소음공해로 인한 문제와 단조로운 소리로 인하여 조류의 학습효과로 효과성이 저하되는 단점을 가진다. 본 논문에서는 지향성 스피커를 이용하여 주변의 소음을 최소화하고 스피커 구동 장치에 대해 상하 및 좌우 각도를 자유롭게 하여 활용성을 극대화하였다. 또한 다양한 스캐닝 패턴을 이용하여 학습효과로 인한 성능저하 문제를 해결하였다. 향후, 원격제어 기능과 조류 종류를 인식할 수 있는 딥러닝 모델을 적용하여 중앙통제가 가능한 플랫폼으로 발전시키고자 한다.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.607-614
• /
• 2015

일반적으로 건축물의 마감은 기본적인 발수성을 가진 수성페인트 마감으로 이루어진다. 이는 건축물 외벽에 작업시 적용하기 쉬우며, 건축물 유지 또한 쉬워 많은 장점을 가지고 있다. 하지만 자외선으로 인해 변색 또는 열화 되기 쉬워 그 효과는 기대에 미치지 못하고 있다. 따라서 본 연구는 외부 표면마감 재료로서 발수제를 직접 혼입한 수성페인트의 색 변화를 통한 내구성능을 분석하여 실제 현장에 적용하기 위한 실용성을 평가하고자 하였다. 촉진 시간에 따른 색 변화 및 색차를 측정하였으며, 적용가능성은 실험결과를 토대로 평가하였다. 색차, 명도 및 색도의 변화량을 실험결과에 따라 종합적으로 고려해 볼 때 본 연구에서 제안한 발수제를 혼입한 수성페인트 마감공법(혼입율 2, 5, 8%)은 충분히 사용 가능할 것으로 사료된다. 이는 건축물의 외부 표면을 수성페인트로 칠한 후 추가로 발수제를 도포하는 등의 기존 표면 마감방법에 비해 공사내용이 간편하며 시공성도 양호하여 폭넓은 활용이 기대된다. 또한 실제 현장에서는 원하는 색상으로 필요한 양만큼 제조하여 사용할 수 있으며, 전문 인력이 필요하지 않아 손쉽게 활용 가능할 것으로 기대된다.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• 한국안광학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2014

목적: 플라스틱 렌즈의 온도에 의한 영향을 조사하고자 열 충격을 주어 렌즈 재질과 코팅의 변화를 살펴보았다. 방법: 본 연구에서는 굴절률이 다른 3 가지의 렌즈(2 종류의 thiourethane계열 렌즈, 한 종류의 allyl diglycol carbonate, ADC 렌즈)를 5 시간 동안 고온(50, 80, 그리고 $100^{\circ}C$)에 노출시켰을 때 각각의 코팅(반사방지코팅, 하드 코팅, 그리고 수막방지코팅)의 변화를 측정하였다. 결과: 그 결과 고굴절률 렌즈들에서는 경도의 변화가 미미하였으나 중굴절률 렌즈는 고온의 열에 노출될수록 경도가 점차 감소하여 하드코팅이 손상됨을 확인하였다. 모든 렌즈의 광투과율이 $80^{\circ}C$ 이상의 열 충격 시 큰 감소가 나타나 멀티코팅 층이 파괴됨을 유추할 수 있었다. 렌즈에 열 충격이 가해질수록 표면 접촉각이 작아져 $80^{\circ}C$ 이상 가열 시 수막발수코팅이 손상되기 시작함을 보였다. 결론: 굴절률이 다른 3가지 렌즈 모두에서 $80^{\circ}C$ 이상의 열 충격을 받았을 때 발수코팅을 포함한 멀티코팅이 손상되었고 고분자 재료 소재에 따라 기계적, 물리적 특성 변화정도가 다르게 나타났다.

• 한국의류학회지
• /
• 제17권4호
• /
• pp.577-586
• /
• 1993

Pesticide protective clothing has not been frequently worn due to its lack of thermal comfort. It is important to develop fabrics which can allow the wearer to work in comfort. One of the possible way to achieve the goal is to produce fabrics with a water- and oil-repellent finish which would resist pesticide penetration but maintain some breathability. The purpose of this study were to evaluate the pesticide barrier properties of untreated and water- and oil-repellent finished nonwoven fabrics. Three types of nonwoven fabrics(Tyvek, Sontara and Kimlon) were used as test specimens. By pad-dry-cure method, each of the specimen was treated with fluorocarbon. The pesticide barrier properties (amount of pesticide penetration and residue) were measured by the gas chromatography. The performance properties of untreated and treated specimens were evaluated with respects to water pepellency(KS K 0590), oil repellency(AATCC 118), water resistance(KS K 0591, AATCC 42), water vapor transmission (KS A 1013) and air permeability(KS K 0570). The results of this study were as follows : 1) The untreated Sontara showed much more amount of pesticide penetration than untreated Tyvek and Kimlon, while the treated Sontara showed little amount of pesticide penetration. 2) After laundering, the amount of pesticide residue in the untreated and treated Sontara was less than that in Tyvek and in Kimlon. 3) Water- and oil-repellent finish improved water repellency, oil repellency, and water resistance of specimens. 4) The untreated Sontara and Kimlon showed higher water vapor transmission and air permeability than untreated Tyvek. Water vapor transmission and air permeability of treated specimen decreased compared to those of untreated.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.30-37
• /
• 2009

Studies on plants such as lotus leaf suggested that dual-scale structure could contribute to super-hydrophobicity. We introduced super-hydrophobicity onto poly(ethylene terephthalate)(PET) fabric with dual-scale structure by assembling $TiO_2$ nano sol. PET fabric was treated with $TiO_2$ sol, water-repellent agent using various parameters such as particle size, concentration. Morphological changes by particle size were observed using field emmission scanning electron microscopy(FE-SEM) and AFM measurement, contact angle measurement equipment. The contact angle of water was about 138.5$^{\circ}$, 125.8$^{\circ}$, 125.5$^{\circ}$ and 108.9$^{\circ}$ for PET fabric coated with 60.2nm, 120.1nm, 200nm and 410.5nm $TiO_2$ particles, compared with about 111.5$^{\circ}$ for PET fabric coated with water repellent. When we mixed particle sizes of 60.2nm and 120.1nm by 7:3 volume ratio, the contact angle of water was about 132.5$^{\circ}$. And we mixed particle sizes of 60.2nm and 200nm by 7:3 volume ratio, the contact angle of water was about 141.8$^{\circ}$. Also we mixed particle sizes of 60.2nm and 410.5nm by 7:3 volume ratio, the best super-hydrophobicity was obtained. In this paper, we fabricated various surface structures to the water-repellent surfaces by using four types of $TiO_2$ nano-particles, and we found that the nanoscale structure was very important for the super-hydrophobicity.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.276-287
• /
• 2019

In this study, cotton fibers were coated with a different weight percentage of octadecyl dimethyl(3-triethoxy silylpropyl) ammonium chloride(ODDMAC) to improve antimicrobial and water repellent properties. First, the ODDMAC dissolved in ethanol to prepare a solution. Then the cotton fibers were immersed in the ODDMAC/ethanol solution for 10 minutes at ambient temperature and dried at 80℃ for 3 minutes followed by curing. The treated cotton fibers were characterized by scanning electron microscopy(SEM) and x-ray photoelectron spectroscopy(XPS). The treated cotton fibers revealed sufficient antimicrobial activity against Klebsiella pneumoniae(ATCC 4352) and Staphylococcus aureus(ATCCBAA-1707). The hydrophobic nature of the treated cotton fibers was characterized by contact angle measurement. The results showed that the cotton fibers treated with the ODDMAC showed excellent hydrophobic properties which improved to 121°.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 1993

The effect of particle size of Al powder, water repellent agent and finishing agent on frost resistance, absorption ratio and structure of micropore was examined to improve the physical properties and durability of ALC. According as the amount added of water repellent agent was increased, frost resistance was improved and absorption ratio was decreased. From one side freezing /thaw test, finishing agent which has a low vapor permeation located the crack at close indoor point of ALC specimen. ALC produced from fine Al powder has a low volume reduction by scalling and a sound appearance after freezing/thawing test and top surface freezing test, The crystal of tobermorite in ALC matrix was converted to calcium carbonate by carbonation which was accelerated with the decreasing of water content. Since the micropore of ALC was filled up by calcium carbonate, void ratio was reduced and crack was detected after complete carbonation.