• Journal of the Korean Applied Science and Technology
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1991

In the preparation of acrylic water repellent(EDLWC). quaternized 2-diethylarrunoethylmethacrylate-stearylmethacrylate copolymer (DSACC) and quaternized 1-Iaurovlbis(aminoethyl)-2-dodecylimidazoline(LDDIC) were selected as a basic resin and the improving agent such as softening effect and hydrostatic pressure of the water repellent. EDLWC was prepared by blending waxes and emulsifier for waxes with various ratio to DSACC and LDDIC. As the results of the measurement of water repellency, washable, tear strength and crease recovery to polyester-cotton(P/C) blended fabrics treated with EDLWC only or addition of textile finishing resin, the physical properties were increased. Sodium acetate was the most effective catalyst in the water repellency among the various kinds of catalyst. and the reasonable concentration of the catalyst was 1. 4 wt%. EDLWC was confirmed as durable water repellent with the results of making little difference of water repellency as ${\pm}5$ point after and before washing. The reaction mechanism between P/C blended fabrics and EDLWC in the presence of catalyst was proposed. And also, the longitudinal view of the P/C blended fabrics treated with water repellent was observed with scanning electron microscope.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.327-334
• /
• 2018

Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.639-648
• /
• 1992

For recycling cement hydrate(CH) as waterproofers for mortar and concrete or a filler for rubber & plastics, the cement hydrates were treated with stearic acid(SA). And the bonding characteristics and the water repellency of the CH-SA compounds were investigated by using FT-IR, TGA, SEM, XRD, and contact angle measuring apparatus. Water tightness of the remitars used CH-SA compounds was also tested. The results are summarized as follows : 1) If the cement hydrates are treated with over 2.0% of stearic acid, the CH-SA compounds show very strong water repellency. 2) The stearic acids are solidified on the surfaces of cement hydrate in calcium stearate and aluminium stearate. 3) If CH-SA compounds which is cement hydrate treated with 5~10% of stearic acid are used 3%~6% in remitar, water absorption ratio and water permeatility ratio of remitar are decreased in below 30% of those of the ordinary remitar.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.577-586
• /
• 1993

Pesticide protective clothing has not been frequently worn due to its lack of thermal comfort. It is important to develop fabrics which can allow the wearer to work in comfort. One of the possible way to achieve the goal is to produce fabrics with a water- and oil-repellent finish which would resist pesticide penetration but maintain some breathability. The purpose of this study were to evaluate the pesticide barrier properties of untreated and water- and oil-repellent finished nonwoven fabrics. Three types of nonwoven fabrics(Tyvek, Sontara and Kimlon) were used as test specimens. By pad-dry-cure method, each of the specimen was treated with fluorocarbon. The pesticide barrier properties (amount of pesticide penetration and residue) were measured by the gas chromatography. The performance properties of untreated and treated specimens were evaluated with respects to water pepellency(KS K 0590), oil repellency(AATCC 118), water resistance(KS K 0591, AATCC 42), water vapor transmission (KS A 1013) and air permeability(KS K 0570). The results of this study were as follows : 1) The untreated Sontara showed much more amount of pesticide penetration than untreated Tyvek and Kimlon, while the treated Sontara showed little amount of pesticide penetration. 2) After laundering, the amount of pesticide residue in the untreated and treated Sontara was less than that in Tyvek and in Kimlon. 3) Water- and oil-repellent finish improved water repellency, oil repellency, and water resistance of specimens. 4) The untreated Sontara and Kimlon showed higher water vapor transmission and air permeability than untreated Tyvek. Water vapor transmission and air permeability of treated specimen decreased compared to those of untreated.

• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.151-160
• /
• 2014

A series of terpolymers based on stearyl methacrylate (SMA), n-methyol acrylamide (n-MAM), and 2-(perfluorooctyl) ethyl acrylate (PFOEA) were synthesized by changing PFOEA contents up to 8 wt% in order to obtain optimal water-repellent properties. In addition, various contents of m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI) from 1 to 4 wt% were added to the above terpolymers with 4 wt% of PFOEA content. The emulsion polymerization was carried out using tridecyl alcohol (EO)7 (TDA-7) as a nonionic surfactant, alkyl dimethyl amine derivatives (ADAD) as a cationic surfactant, and 2,2'-azobis(2-amidinopropane dihydrochoride) (AAPDL) as an initiator. The synthesized copolymers were characterized by FT-IR spectroscopies, contact angle, surface energy, and water-repellency. Surface and thermal properties were analyzed by SEM, TGA, and DSC. It was found that water repellency increased with increasing the contents of PFOEA and TMI.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.325-329
• /
• 2012

In this study, 1, 2 and 4% aqueous extracts of common cocklebur (Xanthium strumarium) fruit were tested against pulse beetle (Callosobruchus chinensis) for development of an environmental friendly control methods of this pest. The common cocklebur fruit extracts showed effects on mortality, repellency, fecundity and adult emergence of C. chinensis and inhibited pulse grains from damage. The 4% extract showed the highest mortality (26%) and repellency rate (53.3%) at 2 day after treatment and 3 hours after treatment, respectively. The studied insects revealed lowest fecundity (113.7 female-1), highest percentage of adult emergence inhibition (37.0%) and lowest percentage (42.3%) of seed damage when they were reared on pulse grains mixed with 4% extract. This finding indicated that common cocklebur fruit extract may be used in the integrated management of pulse beetle for protecting stored grains.

• Korean journal of applied entomology
• /
• v.44 no.4 s.141
• /
• pp.331-336
• /
• 2005

Four mosquito repellents, product A (aerosol), product B (liquid), product C (aerosol) and product D (lotion) were tested for their persistent repellency and quantity of DEET remained with the lapse was analyzed. In shirt term test with human (or 8 hours, product A (aerosol), product B (liquid), product C (aerosol) and product D (lotion) appeared over 95% repellency for eight, five, six and six hours. respectively. In long-term tests with shirt piece for 16 days, product A (aerosol) and product C (aerosol) showed 100% repellency for 10 days. In the assay of quantity of DEET remained in shirt pieces with the lapse of time, two products was decreased to the same pattern.

• Korean journal of applied entomology
• /
• v.44 no.3 s.140
• /
• pp.243-249
• /
• 2005

We investigated the repellency of eight mosquito repellents against Culex pipiens pallens and Aedes albopictus, and the quantity of DEETs were analysed by using gas chromatography. Ae. albopictus showed higher bloodsucking efficacy than Cx. pipiens pallens of the two subjects mouse and human hands, and human hand was more efficacious method for mosquito bloodsucking efficacy than mouse. Among the eight repellents were tested with mouse as subjects for eight hours, product C, G, and H were high repellency than others. In the case of human hands as subject, product C was highly effective than above other products. The DEET quantities of eight repellants varied from 7.31 g to 38.9 g in 100 g contents and we ascertained that there was a correlation between mosquito repellency and the DEET quantities remained after the treatments. It was evidenced from the long term test with shirt piece, in this test the Ae. albopictus attack was increased when the DEET quantity decreased below 40%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.