• Journal of Applied Reliability
• /
• v.5 no.3
• /
• pp.373-379
• /
• 2005

In many cases, it is more practical and economical to repair a system than to replace the whole system or to perform a complete overhaul when the system fails. Two basic replacement policies were proposed by Barlow and Hunter(1960) and Morimura (1970), in which the minimal repair times are identically distributed. But, as Lam(1988) pointed out, in many cases of deteriorating system, in view of ageing and cumulative wear, the repair time will tend to be longer and longer. In this note, the two basic replacement policies are considered for a repairable system with linearly increasing repair times. Optimal policies, which maximize the steady state availability of the system, are obtained for the Weibull failure rate case.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.273-281
• /
• 2007

The decision of how long performing system burn-in must be answered with a probabilistic model of a system lifetime at which infant mortality failures created during assembly processes are quantified. In this paper, we propose such a model which is modified from previous results. Using the system model, we derived system reliability in terms of component and system burn-in times for the two cases of minimal repair at system failure and of component replacement and connection repair at their failure times. The procedure is illustrated with a bridge system and the optimal system burn-in times are obtained for maximizing system reliability. The result suggests that an assumption of minimal repair at system failure may underestimate the optimal burn-in time in practice.

• International Journal of Reliability and Applications
• /
• v.11 no.2
• /
• pp.123-138
• /
• 2010

This paper investigates a mathematical model of a system composed of two non-identical unit parallel system with common-cause failure, critical human error, non-critical human error, preventive maintenance and two type of repair, i.e. cheaper and costlier. This system goes for preventive maintenance at random epochs. We assume that the failure, repair and maintenance times are independent random variables. The failure rates, repair rates and preventive maintenance rate are constant for each unit. The system is analyzed by using the graphical evaluation and review technique (GERT) to obtain various related measures and we study the effect of the preventive maintenance preventive maintenance on the system performance. Certain important results have been derived as special cases. The plots for the mean time to system failure and the steady-state availability A(${\infty}$) of the system are drawn for different parametric values.

• Corrosion Science and Technology
• /
• v.18 no.5
• /
• pp.190-195
• /
• 2019

SA508 low-alloy steel for a reactor vessel was exposed to primary water in a pressurized water reactor (PWR) plant because the cladding layer of type 309 stainless steel for the RPV was removed, due to an accident in which the detachment of the thermal sleeve occurred. The major advantage of the electrochemical deposition (ECD) Ni plating technique is that the reactor pressure vessel can be repaired without significant thermal effects, and Ni has solid corrosion resistance that can withstand boric acid. The corrosion rate assessment of the damaged part was performed, and its trend was analyzed. Essential variables of the Ni plating for repair of the damaged part were derived. These conditions are applicable variables for the repair plating device, and have been carefully adjusted using the repair plating device. The process for establishing ASME technical standards called Code Case N-840 is described. The process of developing Ni-plating devices, and the electroplating procedure specification (EPS) are described.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.241-242
• /
• 2019

This technology is a water leak repair technology using composite materials of concrete structures that block leakage of structures by injecting rapid microcement into the face of underground concrete to block water and injecting flexible glycidylacrylate. Rapid micro cement system repair materials are mixed with fine fibers to improve the flexural sensitivity of the material and to form a layer that blocks stabilized water at the back of the structure by allowing rapid and tight spatial filling during injection with high cohesion The glycidylacrylate repair material can control the expansion rate, and the external stress also has the characteristic that the form of the material is not destroyed or separated, which can also be applied to vibrating induced structures that produce repetitive fatigue loads, and has an effective durability in saline, alkali, acid (chloric acid, sulfuric acid, nitric acid).

• Clinical Pain
• /
• v.19 no.2
• /
• pp.59-63
• /
• 2020

Rotator cuff tear is often cited as a reason for shoulder pain and dysfunction in patients > 40 years of age. Surgical repair of rotator cuff tear is one of the most commonly performed orthopedic surgical procedures. Until now, the success rate of surgical repair for rotator cuff tear has not been satisfactory. Many factors influence the process of rotator cuff repair such as the presence of tendinosis and fatty infiltration, but the main factor is the difficulty in achieving healing at the tendon to bone interface. There is a clinical need for bioengineering approaches to promote regeneration of the native enthesis and reduce the poor outcomes after surgical repair. Toward this end, the design and fabrication of multiphasic or hierarchically structured scaffolds have received great attention. This manuscript deals with information on the tendon to bone interface and tries to find out why a multiphasic scaffold is necessary to reproduce it and considerations that need to be taken into to make an ideal scaffold.

• Journal of Wetlands Research
• /
• v.26 no.2
• /
• pp.139-146
• /
• 2024

Various injection materials, such as asphalt-based injection materials, urethane-based injection materials, cement- based injection materials, and acrylic-based injection materials, are used for the repair of aged conduits and underground structures with cracks. In this study, research was conducted on an environmentally friendly acrylic- based leak repair material that exhibits good curing properties even in humid conditions and stability in temperature fluctuations. To compare the performance of the improved acrylic leak repair material with the existing acrylate injection material, experiments were conducted using KS standard methods, including underwater length change rate tests, underwater leakage resistance tests, and chemical performance tests. The comparative experiments revealed that the improved acrylic leak repair material showed no changes in shrinkage due to humidity, temperature variations, or chemical reactions compared to the existing acrylate injection material. In the underwater resistance test, the improved acrylic leak repair material did not show any leakage. Additionally, to assess the environmental impact of the improved acrylic leak repair material, acute fish toxicity tests and acute oral toxicity tests were conducted, and the results showed no mortality and no specific concerns with the test specimens. The experimental results led to the conclusion that the improved acrylic leak repair material is considered to be superior in performance, environmentally safe, and harmless to the human body. Based on various experimental results, it is inferred that the improved acrylic leak repair material is suitable for use as a repair material for cracks in manholes and underground structures compared to the existing acrylate repair material. This study aims to propose valuable data for future technological development by evaluating the applicability of acrylic leak repair materials.

• Journal of Chest Surgery
• /
• v.50 no.6
• /
• pp.430-435
• /
• 2017

Background: Mycotic aortic aneurysms are rare and life-threatening. Unfortunately, no established guidelines exist for the treatment of patients with mycotic aortic aneurysms. The purpose of this study was to evaluate the midterm outcomes of the open repair of mycotic thoracic and thoracoabdominal aneurysms and suggest a therapeutic strategy. Methods: From 2006 to 2016, 19 patients underwent open repair for an aortic aneurysm. All infected tissue was extensively debrided and covered with soft tissue. We recorded the clinical findings, anatomic location of the aneurysm, bacteriology results, antibiotic therapy, morbidity, and mortality for these cases. Results: The median age was $62{\pm}7.2years$ (range, 16 to 78 years), 13 patients (68%) were men, and the mean aneurysm size was $44.5{\pm}4.9mm$. The mean time from onset of illness to surgery was $14.5{\pm}2.4days$. Aortic continuity was restored in situ with a Dacron prosthesis (79%), homograft (16%), or Gore-Tex graft (5%). Soft-tissue coverage of the prosthesis was performed in 8 patients. The mean follow-up time was $43.2{\pm}11.7months$. The early mortality rate was 10.5%, and the 5-year survival rate was $74.9%{\pm}11.5%$. Conclusion: This study showed acceptable early and midterm outcomes of open repair of mycotic aneurysms. We emphasize that aggressive intraoperative debridement with soft-tissue coverage results in a high rate of success in these high-risk patients.

• Archives of Reconstructive Microsurgery
• /
• v.8 no.1
• /
• pp.44-49
• /
• 1999

From January 1990 to December 1998, 449 consecutive single-digital replantations were reviewed retrospectively in order to determine the essential number of vascular anastomoses for successful finger replantation. The correlations between the number of anastomosed vessels and survival rate were examined according to the amputated digital levels and all of the correlated results were compared with each other statistically. In zone I, The survival rate of the digits with a repaired vein was higher than that of digits treated with external bleeding method. In zone II, the equal number(s) between the arterial and venous repair was an important factor in successful replantation. And the repaired arteries more than repaired veins in number led to venous congestion and resulted in a failure of replantation, which was maybe due to the large amount of arterial input relative to small volume of amputated stump with small sized vein. In zone III, the equal number(s) between the arterial and venous repair was also an important factor in successful replantation. But unlike in zone II, venous congestion was scarcely happened if the venous drainage was sufficient with a repaired large vein alone. In zone IV, two or more arteries and veins were required for successful replantation. In conclusion, it is desirable that the repair of vessels as many as possible to increase the possibility of a good result. But digital amputations and their condition for replantation were variable, therefore, the numbers in vascular repair should to be modified and straightforward as the case may be.

• Clinics in Shoulder and Elbow
• /
• v.22 no.4
• /
• pp.203-209
• /
• 2019

Background: Clinical outcomes and prognosis of large and massive rotator cuff tears are known to be unpredictable not only in degeneration of the rotator cuff, but also due to a high rate of retear. Methods: Totally, 81 patients who had undergone arthroscopic rotator cuff repair from May 2008 to February 2016 were evaluated in our study. Clinical and functional evaluations were performed with the Constant score and the University of California, Los Angeles (UCLA) score, as well as full physical examination of the shoulder. All patients were confirmed to have magnetic resonance imaging (MRI) of tendon healing at least 1 year postoperatively. Results: The average age at the time of surgery was 65 years (range, 47-78 years). The average duration of postoperative time in which a follow-up MRI was performed was 36.1 months (range, 12-110 months). Large tears were present in 48 cases (59.3%) and massive tears in 33 cases (40.7%). Overall, there were 33 retear cases (40.7%). All the average clinical outcome scores were significantly improved at the last follow-up (p<0.001), although repair integrity was not maintained. Compared to type A, types C, and D of the Collin's classification showed significantly higher retear rates (p=0.036). Conclusions: Arthroscopic rotator cuff repair yields improved clinical outcomes and a relatively high degree of patient satisfaction, despite the repair integrity not being maintained. Involvement of the subscapularis muscle or infraspinatus muscle had no effect on the retear rate.