• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.32-39
• /
• 2018

Repairing timing and the extended service life with repairing are very important for cost estimation during operation. Conventionally used model for repair cost shows a step-shaped cost elevation without consideration of variability of extended service life due to repairing. In the work, RC(Reinforced Concrete) Column is considered for probabilistic evaluation of repairing number and cost. Two mix proportions are prepared and chloride behavior is evaluated with quantitative exterior conditions. The repairing frequency and cost are investigated with varying service life and the extended service life with repairing which were derived from the chloride behavior analysis. The effect of COV(Coefficient of Variation) on repairing frequency is small but the 1st repairing timing is shown to be major parameter. The probabilistic model for repairing cost is capable of reducing the number of repairing with changing the intended service life unlike deterministic model of repairing cost since it can provide continuous repair cost with time.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.9
• /
• pp.359-366
• /
• 2021

A number of construction companies in Korea invest considerable human and financial resources to construct a system for managing apartment defect data and for categorizing repair tasks. Thus, this study proposes machine learning models to automatically classify defect complaint text-data into one of the sub categories of 'finishing work' (i.e., one of the defect repair tasks). In the proposed models, we employed two word representation methods (Bag-of-words, Term Frequency-Inverse Document Frequency (TF-IDF)) and two machine learning classifiers (Support Vector Machine, Random Forest). In particular, we conducted both binary- and multi- classification tasks to classify 9 sub categories of finishing work: home appliance installation work, paperwork, painting work, plastering work, interior masonry work, plaster finishing work, indoor furniture installation work, kitchen facility installation work, and tiling work. The machine learning classifiers using the TF-IDF representation method and Random Forest classification achieved more than 90% accuracy, precision, recall, and F1 score. We shed light on the possibility of constructing automated defect classification systems based on the proposed machine learning models.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.370-377
• /
• 2018

Although the frequency of composite resin restoration in children is gradually increasing, there are insufficient researches about the rate of composite resin repair in children. The purpose of this study was to evaluate the repair rate of composite resin restorations in the permanent first molar in children under 12 years old. This study retrospectively analyzed 169 children treated with composite resin restoration in the permanent first molar from May 2014 to April 2015. According to the location of the tooth, the repair rate was higher in the mandible than maxilla and in the left than right. In the classification of restoration, the repair rate was the highest in the class II cavity, and the repair rate was the lowest in the restoration of the occlusal surface only. Repair rate in two years was 14.8%, and repair hazard ratio decreased with age. The most common reason of composite resin restoration replacement was the secondary caries (74.1%). Within the limits of study, the repair rate of children was higher than that of adult due to the characteristics of children. Therefore, dentists should understand these characteristics and try to reduce the repair rate of composite resin composite restorations.

• Journal of Chest Surgery
• /
• v.18 no.1
• /
• pp.7-12
• /
• 1985

The frequency of intraventricular conduction disturbance [IVCD] following right ventriculotomy and right atriotomy approach for ventricular septal defect [VSD] closure was compared in various conditions. Of the 170 isolated VSD patients, 114 patients were repaired via right ventriculotomy and 56 patients were repaired via right atriotomy. The results were as follows; 1. The frequency of IVCD was 45.6% in right ventriculotomy, and 21.2% in right atriotomy group [P<0.01]. The frequency of IVCD following transverse ventriculotomy and vertical ventriculotomy was not significantly different. 2. The frequency of IVCD in subarterial VSD following right ventriculotomy and right atriotomy was not significantly different. But the frequency of IVCD in perimembranous VSD was 50.8% in right ventriculotomy and 27.5% in right atriotomy group [P<0.01]. 3. The frequency of IVCD was higher in groups with larger VSD and it was more significant in right ventriculotomy group. 4. The frequency of IVCD was higher in patch graft closure and it was more significant in right ventriculotomy group. 5. Overall frequency of IVCD was lower in right atriotomy than right ventriculotomy group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.133-141
• /
• 2004

Statement of problem : Porcelain restorations are widely used in restorative dentistry with a high degree of general success. However, porcelain is brittle and may fracture intraorally. Sometimes a repair may be attempted using composite resin and bonding system available. Color stability of porcelain repair resins affects esthetics and prognosis of prosthesis, so that provides important criteria for the choice of porcelain repair resins. Purpose : The purpose of this study was to investigate the color stability of composite resins used widely as porcelain repair system. Materials and method : Composite resins used for this study were Carisma(Kulzer, Germany), Tetric ceram(Ivoclar, Liechtenstein), Filtek Z250(3M, USA), and Arabesk Top(VOCO, Germany). Thirty disc-shaped specimens($10{\times}2mm$) were fabricated from each composite resin. Color changes of specimens after treatment using thermocycling system(KD-TCS30, Kwang-duk F.A. Korea) and after immersion in methylene blue(0.05% by Wt) were measured with colorimeter(Model Tc-6Fx, Tokyo Denshoku Co.) and obtained data were analyzed. Results and Conclusion: The results obtained from this study were as fo11ows. 1. The color change of Filtek Z250 was lesser than those of Tetric ceram and Arabesk Top after thermocycling (12000 times). 2. All of the composite resins in this study showed increase of color change according to increase of thermocycling frequency. 3. After treatment with methylene blue, the color change of Arabesk Top was greater than those of Carisma and Tetric ceram, and Tetric ceram was more stable than others.

• Journal of Chest Surgery
• /
• v.19 no.2
• /
• pp.232-237
• /
• 1986

The intraventricular conduction disturbances have been documented after correction of ventricular septal defects by any surgical route but debated its etiology. And so the frequency of conduction disturbances following right ventriculotomy, right atriotomy and pulmonary arteriotomy for closure of ventricular septal defects was compared in various conditions. The present series consists of 218 patients with ventricular septal defects. They had the surgical repair at the Seoul National University Hospital from January 1983 to October 1984. Conduction disturbances were studied with conventional 12 leads electrocardiogram. Of the 218 VSD`s 139 patients were repaired via vertical right ventriculotomy, 45 patients via right atriotomy, 34 patients via pulmonary arteriotomy. 1] Of 218 patients the frequency of RBBB was 26.1% and the frequency of RBBB + LAH was 6.0%. 2] There is no statistical difference between right ventriculotomy group [30.2%] and right atriotomy group [24.4%]. But there is significant difference between right ventriculotomy group and pulmonary arteriotomy group [11.8%] [P<0.05]. 3] In respect to anatomical classification by Kirklin`s method, the frequency of RBBB was higher in type II [32.1%] than in type I [14.9%]. [P<0.05] But in each anatomical type, there is no influence of the various surgical approach on the incidence of postoperative RBBB. 4] The frequency of RBBB was 31.8% in patch closure group and 14.3% in direct closure group. [P<0.05] Although the result suggests that there is no significant difference in various surgical approaches on the incidence of postoperative conduction disturbances, it may be reduced by a new-ventricular approach or a limited incision at right ventricular outflow tract in right ventricular approach.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.85-94
• /
• 2008

When an RFID reader uses the same frequency or adjacent frequency with neighbor readers, the interference might occur. These interferences cause the RFID reader collision and errors during tag recognition. Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. The reader interference is closely related to the distance between the readers haying interference and used frequency band. In the previous RFID reader anti-collision algorithms, the location of readers inducing interference which is closely related to interference of readers is not considered. Only the reader collision is tried to reduce through frequency transfer after collisions occur or modification of frame size in relation to collision probability based a TDM(Time Division Multiplex). In this paper, the genetic algorithm using two-dimensional chromosome which reflect readers' location is proposed to prevent reader collision effectively. By executing evolutionary operation with two-dimensional chromosome, the location information having influence on reader interference can be used. The repair operation in the proposed algorithm makes all reader stably recognize their tags.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2747-2751
• /
• 2014

Background: DNA repair pathways play a crucial role in maintaining the human genome. Previous studies associated DNA repair gene polymorphisms (XPD Lys751Gln, XRCC1 Arg280His and XRCC1 Arg399Gln) with nasopharyngeal carcinoma. These non-synonymous polymorphisms may alter DNA repair capacity and thus increase or decrease susceptibility. The present study aimed to determine the genotype distribution of XPD codon 751, XRCC1 codon 280 and codon 399 polymorphisms and haplotype associations among NPC cases and controls in the Malaysian population. Materials and Methods: We selected 157 NPC cases and 136 controls from two hospitals in Kuala Lumpur, Malaysia for this study. The polymorphisms studied were genotyped by PCR-RFLP assay and allele and genotype frequenci es, haplotype and linkage disequilibrium were determined using SNPstat software. Results: For the XPD Lys751Gln polymorphism, the frequency of the Lys allele was higher in cases than in controls (94.5% versus 85.0%). For the XRCC1 Arg280His polymorphism, the frequency of Arg allele was 90.0% and 89.0% in cases and controls, respectively and for XRCC1 Arg399Gln the frequency of the Arg allele was 72.0% and 72.8% in cases and controls respectively. All three polymorphisms were in linkage disequilibrium. The odds ratio from haplotype analysis for these three polymorphisms and their association with NPC was 1.93 (95%CI: 0.90-4.16) for haplotype CGC vs AGC allele combinations. The global haplotypte association with NPC gave a p-value of 0.054. Conclusions: Our study provides an estimate of allele and genotype frequencies of XRCC1Arg280His, XRCC1 Arg399Gln and XPD Lys751Gln polymorphisms in the Malaysian population and showed no association with nasopharyngeal cancer.

• Clinics in Shoulder and Elbow
• /
• v.19 no.4
• /
• pp.192-196
• /
• 2016

Background: This study investigated the efficacy and safety of combined subacromial and intravenous patient-controlled analgesia for control of postoperative pain after arthroscopic rotator cuff repair. Methods: Between May 2012 and August 2014, 60 patients who underwent arthroscopic rotator cuff repair with acromioplasty and received patient-controlled analgesia were studied prospectively. Cases were divided into 2 groups: combined subacromial and intravenous infusion group (group A, 30 cases) and solitary intravenous infusion group (group B, 30 cases). The visual analogue scale was used to record the patient's level of pain every 12 hours during postoperative 72 hours and the following 48 hours after the suspension of patient-controlled analgesia. Results: The mean preoperative visual analogue scale score was 7.8 in group A and 7.6 in group B, and the immediate postoperative visual analogue scale score was 7.9 and 8.1 for each group. At postoperative time (From 12 hours to 72 hours after operation), the scores of combined subacromial and intravenous infusion were significantly lower than those of solitary intravenous infusion. Significant difference in the frequency of supplemental analgesic injections was observed between group A and group B (p=0.008). However, no significant difference in complication rate was observed between the two groups (p=0.562). Conclusions: Combined subacromial and intravenous patient-controlled analgesia after arthroscopic rotator cuff repair is more effective than solitary intravenous infusion without significantly increasing complications. Therefore, combined subacromial and intravenous patient-controlled analgesia could be a effective pain control method.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1129-1144
• /
• 2020

The thangka image inpainting method based on wavelet transform is not ideal for contour curves when the high frequency information is repaired. In order to solve the problem, a new image inpainting algorithm is proposed based on edge structural constraints and wavelet transform coefficients. Firstly, a damaged thangka image is decomposed into low frequency subgraphs and high frequency subgraphs with different resolutions using wavelet transform. Then, the improved fast marching method is used to repair the low frequency subgraphs which represent structural information of the image. At the same time, for the high frequency subgraphs which represent textural information of the image, the extracted and repaired edge contour information is used to constrain structure inpainting in the proposed algorithm. Finally, the texture part is repaired using texture synthesis based on the wavelet coefficient characteristic of each subgraph. In this paper, the improved method is compared with the existing three methods. It is found that the improved method is superior to them in inpainting accuracy, especially in the case of contour curve. The experimental results show that the hierarchical method combined with structural constraints has a good effect on the edge damage of thangka images.