• 제목/요약/키워드: removing

검색결과 4,381건 처리시간 0.035초

오버레이용접된 Wrapping Roll의 비드마크제거를 위한 열영향부의 미세조직에 관한 연구 (The Study on Microstructure of the Heat Affected Zone for Removing of Beadmark in the Overlayered Wrapping Roll)

  • 유국종;백응률
    • Journal of Welding and Joining
    • /
    • 제18권6호
    • /
    • pp.68-73
    • /
    • 2000
  • In case of overalyered wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The overlayered alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is between than martensitic matrix for removing of beadmark of wrapping roll surface.

  • PDF

급성(急性) 후두염(喉頭炎)에 대(對)한 문헌적(文獻的) 고찰(考察) (A Literature Study on Acute Laryngitis)

  • 정창호;김윤희
    • 혜화의학회지
    • /
    • 제14권1호
    • /
    • pp.113-128
    • /
    • 2005
  • 1. Acute laryngitis is a hoarse voice or the complete loss of the voice because of irritation to the vocal folds. 2. Acute laryngitis belongs with the GeupHuEum, HuBi, HuPung in oriental medicine. 3. GeupHuEum is caused by wind and cold, weak of lung and kidney, evil energy of liver, sore throat, etc. It is treated with the methods of cooling lung and wetting, removing heat and changing phlegm, etc. 4. Hubi is caused by fire and wind, dampness, large lung. It is treated with the methods of removing heat and antidote, reinforcing and descending fire, bleeding by acupuncture, vomiting. 5. Hupung is caused by phlegm and heat of lung and stomach, wind and heat. It is treated with the methods of dispersing wind and removing heat and changing phlegm by medicine, acupuncture, moxibustion, vomiting, fumigation.

  • PDF

가스충전소에서 작업복의 정전기 안전관리에 관한 연구 (A Study on the Safety Management of the Electrostatic in Working Clothes at the Gas Station)

  • 이금환;정재희
    • 한국안전학회지
    • /
    • 제24권6호
    • /
    • pp.39-44
    • /
    • 2009
  • In order to prevent fire and explosion due to the electrostatic discharge at the Gas Station etc. This result will be applied to standard in the future. Wearing the non-electrostatic removing wear, Charged voltage of human body is 3,980V(MIE is approximately 0.79mJ). There is a possibility of fire explosion because the MIE of LP gas is 0.25mJ. In accordance with using period(whasing times), Charged voltage is shown that propensity is increased. Electrostatic charge amount is upper standard($0.6{\mu}$C) of the hazard of electrostatic removing wear. There is a possibility of fire and explosion. Therefore, countermeasure and management are needed about gas station worker.

복합잡음 환경에서 영상 잡음제거를 위한 영상복원 알고리즘 (Image Restoration Algorithm for Image Noise Removal in Mixed Noise Environment)

  • ;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 춘계학술대회
    • /
    • pp.112-114
    • /
    • 2014
  • 영상은 일반적으로 임펄스 또는 AWGN에 의해 훼손되는 경우가 많으며, 두 가지 잡음이 동시에 첨가될 경우도 있다. 영상에 첨가되는 잡음을 제거함에 있어서 기존의 메디안 필터는 임펄스 잡음제거에 효과적이고 평균필터는 AWGN 제거에 효과적이다. 그러나 기존의 방법은 복합잡음이 첨가될 경우 잡음제거특성이 미흡하며, 이에 따라 본 논문에서는 복합 잡음제거를 위한 비선형 필터 알고리즘을 제안하였다. 시뮬레이션 결과, 제안한 방법은 기존의 방법들에 비해 우수한 잡음제거 특성을 나타내었다.

  • PDF

생물학적 인 제거 공정에서 탄소원에 따른 미생물군집구조의 변화 (Changes of the Bacterial Community Structure Depending on Carbon Source in Biological Phosphate Removing Process)

  • 여상민;이영옥
    • 대한환경공학회지
    • /
    • 제28권2호
    • /
    • pp.165-172
    • /
    • 2006
  • 생물학적 인 제거공정에서 인 제거 효율에 따른 인제거관련 미생물을 포함하는 슬러지 미생물상의 변화를 분석하기 위하여 2개의 반응조(SBR)에 각기 다른 탄소원(초산나트륨, 포도당)을 주입하여 작동시켰다. 초산나트륨을 주입한 SBR1에서는 반응 100일 후, 유출수에서 $PO_4-P$가 3.92 mg/L 검출되었고(제거효율 60.8%) 이때의 미생물상은 ${\beta}$-subclass proteobacteria(39.67%)와 인제거미생물인 PAO(45.10%)가 우점하는 양상을 보인 반면, 포도당을 주입한 SBR 2에서는 $PO_4-P$가 8.3 mg/L 검출되었으며(제거효율 17%), ${\gamma}$-subclass proteobacteria(23.89%)가 우점하였고 PAO는 21.42%를 차지할 뿐이었다. DGGE결과에서도 ${\beta}$-subclass proteobacteria가 SBR1에서 우점하였다. 그러나 수온이 증가할수록 ${\beta}$-subclass proteobacteria and PAOs의 비율이 감소하였고 GAOs는 증가하였다. 그러므로 생물학적인 인제거공정에서 수온과 영양원의 상태 등 환경인자들이 인제거 미생물과 인제거를 저해하는 미생물의 우점도에 영향을 미친다고 할 수 있다.

엉덩관절 정면 검사 시 환자 피폭 감소 (Reducing Radiation Exposure During X-ray Imaging of Both Hip AP)

  • 신성규;이효영
    • 한국방사선학회논문지
    • /
    • 제10권5호
    • /
    • pp.313-320
    • /
    • 2016
  • 본 연구는 엉덩관절 정면 검사 시 격자 제거와 관전압, Cu Filter의 조합을 이용하여 환자의 피폭을 감소하고자 시행하였다. 엉덩관절 정면 검사법을 대상으로 격자의 사용과 제거 상태에 따라 각각 관전압을 60~90 kV로 변화시키고 Cu Filter를 0.1~0.3 mm로 추가시켜 입사선량, 유효선량을 측정하고 영상의 진단적 가치를 평가하였다. 격자를 사용하고 관전압 60 kV, none filter에서 입사선량은 4.77 mGy로 가장 높은 측정치를 나타냈고 격자를 사용하지 않고 90 kV, 0.3 mm Cu filter 조건에서의 입사선량은 0.14 mGy로 가장 낮았으며 약 34배의 차이를 나타냈다. ICRP Pub. 60을 기준으로 70 kV에서 고환, 난소의 유효선량은 격자를 사용 했을 경우 0.255 mSv, 격자를 제거하였을 경우에는 0.049 mSv로 약 5.2배의 차이를 나타냈다. ICRP Pub. 103을 기준으로 70 kV에서 고환, 난소의 유효선량은 격자를 사용했을 경우 0.090 mSv 격자를 제거하였을 경우에는 0.020 mSv로 약 4.5배의 차이를 나타냈다. 격자를 사용하였을 경우의 노광지수는 671~782, 격자를 제거하였을 경우에는 513~606 사이로 적정 노출조건이었으며 영상평가결과 모두 진단적 가치가 있는 영상으로 나타났다. 따라서 엉덩관절 정면 검사 시 격자를 제거하고 관전압을 높이고 Cu Filter를 추가시켜 촬영하면 환자의 피폭을 줄일 수 있을 것이다.

Nd:YAG 레이저의 근적외선과 자외선 펄스를 이용한 NiP 하드디스크 기층의 세척 (Cleaning of Nip Hard Disk Substrate Using Near-Infrared and Ultraviolet Irradiation of Nd:Yag Laser Pulses)

  • 김동식
    • 한국레이저가공학회:학술대회논문집
    • /
    • 한국레이저가공학회 2000년도 추계학술발표대회 논문개요집
    • /
    • pp.23-26
    • /
    • 2000
  • This paper introduces a cleaning process for removing submicron-sized particles from NiP hard disk substrates by the liquid-assisted laser cleaning technique. Measurements of cleaning performance and time-resolved optical diagnostics are performed to analyze the physical mechanism of contaminant removal. The results reveal that nanosecond laser pulses are effective for removing the contaminants regardless of the wavelength and that a thermal mechanism involving explosive vaporization of liquid dominates the cleaning process.

  • PDF

A Study on Optimization of Megasonic Cleaning Process for Manufacturing LCD

  • Kim, Young-Sook;Kim, Hie-Sik;Park, Gi-Sang
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.97.4-97
    • /
    • 2001
  • Recently, TFT LCD (thin film transistor liquid crystal display) manufacturing industry is more concerned with the ways of cleaning large TFT LCD´s with high pixed density than ever Ultrasonic cleaners with high frequencies like 1MHz (megasonic cleaners) are effective in removing very small particles without causing mechanical damage to the surface. In this study a megasonic cleaner for TFT LCD manufacturing process is developed and the performance is evaluated through experiments. The experimental results show that the developed magasonic cleaners is effective in removing very small particle from the LCD panel.

  • PDF

중복비트 제거를 이용한 SPIHT알고리즘의 개선에 관한 연구 (A study on improvement of SPIHT algorithm using redundancy bit removing)

  • 설경호;이원효;고기영;김태형;김두영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
    • /
    • pp.1920-1923
    • /
    • 2003
  • This paper presents compression rate improvement for SPIHT algorithm though redundancy bit removing. Proposed SPIHT algorithm uses a method to select of optimized threshold from feature of wavelet transform coefficients and removes sign bit if coefficient of LL area. Experimental results show that the proposed algorithm achieves more improvement bit rate and more fast progressive transmission with low bit rate.

  • PDF

Background Removing for Digital image self-adaptive acquisition in medical X-ray imaging

  • Li, Xun;Kim, Young-Ju;Song, Young-Jun
    • International Journal of Contents
    • /
    • 제4권1호
    • /
    • pp.12-15
    • /
    • 2008
  • In this paper, we propose a new method of background removing for digital self-adaptive acquisition in medical X-ray imaging. We analysis the construction of video digital acquisition system and main factors of acquired image quality, propose a more efficiency method to against background non-uniformly. With proposed method, non-uniform illumination back ground was well removed without image quality degradation.