• Journal of the Ergonomics Society of Korea
• /
• v.35 no.5
• /
• pp.439-447
• /
• 2016

Objective: The purpose of this study is to design a snow-removing tool using an ergonomic approach. Background: It is necessary to remove snow on the garden of a house or side street to prevent a fall hazard. When a user removes snow using a snow-removing tool, he or she experiences lots of physical discomfort. Therefore it is necessary to design a snow-removing tool to reduce a user's physical discomfort. Method: In this study, a new design for a snow-removing tool was developed considering user needs. The design prototype was compared with an existing tool through electromyography and subjective evaluation. Results: From the comparison evaluation, significant differences between the new design and the existing tool were identified in both muscle fatigue and subjective rating of discomfort. Conclusion: The result showed that the new design is better from the aspect of easing physical discomfort. Application: A new snow-removing tool can be developed using the design so that it can reduce a user's physical discomfort.

• Journal of Biosystems Engineering
• /
• v.35 no.3
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.78.2-78.2
• /
• 2016

There are many telluric absorption lines which are laid on the science spectrum in ground based spectroscopic observations. In especial, the IR region spectra are considerably contaminated by telluric lines. Therefore, many scientists have a difficulty in removing the telluric effect. We thus tried removing telluric lines with IGRINS data by two methods. One is using the standard stellar spectrum as telluric lines. The other adopt calculated synthetic telluric spectrum. Here we present the results of test for precise removing telluric lines on IGRINS spectra.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.50-56
• /
• 2010

This paper presents a new design algorithm for piece-removing dynamical system, based on 6-Sigma DMADOV technique using ARIZ and Brainstorming. Our design target is the piece-removing system installed on a mobile platform of bead-grinding equipment. The 6-Sigma DMADOV technique guides us design process according to 6 steps, i.e., Define - Measure - Analyze - Design - Optimize - Verify. A Design strategy to reduce the weight of piece-removing dynamical system will be explored by using ARIZ, i.e.,(the abbreviation of Algorithm for Inventive Problem Solving in Russian). The ARIZ will result in a final solution that the height and angle control parts for a cutting tool should be replaced by a kinematical approach, rather than complicated mechatronic approach(using motors). The Optimize step is composed of two sub-steps: (i) Generating process for obtaining several ideas of piece-removing system by using Brainstorming technique, satisfying the final solution derived from the Design step using ARIZ, and (ii) Optimizing process for selecting the most optimal idea of piece-removing system by using Pugh's matrix from the viewpoints of weight, cost and accuracy. The laststep of Verify has shown that the final design obtained by the 6-Sigma DMADOV technique with ARIZ & Brainstormingcan improve an initial design with design requirements satisfied. In this paper, we have shown that ARIZ and Brainstorming can be cooperatively merged into 6-Sigma DMADOV to give us both a formulatedproblem-solving approach and diverse candidate solutions(or ideas) without trial-and-error efforts.

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.347-356
• /
• 1993

The three natural zeolites collected in Yungil-gun, Kyungsangbuk-do, Korea, were analyzed by means of chemical wet methods and X-ray diffraction. The results indicated that the primary species of those zeolites were clinoptilolite mixed with heulandite, feldspar, montmorillonite, and quartz. These zeolites were chemically treated with NaOH, $\textrm{Ca(OH)}_2$, and HCl solution and their differences were also studied with X-ray diffraction method. The capabilities of removing $Cs^+$ and Sr^{2+}$ ions with chemically untreated zeolites, chemically treated zeolites, and also with synthetic zeolites were compared. The effect of other cations in removing Sr^{2+}$ ions was also studied. The experimental results showed that$Cs^+$ and Sr^{2+}$ ions could be removed up to 98% and 95% respectively out of 5 ppm with chemically untrearted natural zeolites. The treatment of 0.02N-$\textrm{Ca(OH)}_2$ and that of 2N-NaOH were most effective In removing $Cs^+$ and Sr^{2+}$ ions, respectively. It was found that the mountaintop of Sangjung 1-dong natural zeolite treated with 2N-NaOH was most efficient in removing Sr^{2+}$ ions mixed with other cations, compared with any other chemically treated and untreated natural zeolites in this work.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.293-297
• /
• 2011

This experiment was conducted to elucidate the effects of mulching materials and removing time of the transparent polyethylene (PE) film on the growth of garlic at Uiseong experimental field, Korea. The experimental mulching materials comprised of transparent polyethylene film (0.025 mm) and net polyethylene (NPE). Plant height and leaf number of garlic were highest at PE treatment when the PE removing date was March 18 and this treatment also promoted the no. of cloves. Length of leaf sheath and bolting rate were highest and bulb weight loss rate was lowest at PE + NPE treatment when the PE removing date was March 18. But clove number was the lowest in this treatment compared to conventional PE film treatment. Conventional mulching method accelerated secondary growth rate but bulb weight loss was vice versa. There were statistically no differences in bulb diameter among treatments but conventional treatment positively focused on bulb diameter. Whenever PE film remove can suppress weeds compared to no mulching treatment but the dry weight of weeds were increasing trends as the removal dates of PE film were delayed. Transparent PE or PE + NPE treatments can be recommended to grow best quality garlic when PE film removing date is March 18.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.67-74
• /
• 2014

PURPOSES : This study is to investigate the countermeasures against heavy snow on road in Seoul: Focusing on Seocho 1-dong. METHODS : Since 2000, three cases of the top 10 in the highest snow fall depth in a day occurred in 2001(234mm, 156mm) and 2010(258mm) and the possibility of heavy snow is getting higher. 10 days after heavy snow fall when the snow thaws, socio-economic damages occurred often. For example, the insufficient snow removing, difficulty in patients transfer, crash accidents, injuries from a fall, the increasing cost of snow removing etc. RESULTS : For the effective deploying snow removing equipment and workers, it is necessary to understand emergency snow removing spots. Seocho 1-dong was tested because it contains mountains, hill and urban areas as well as various buildings and road types exposures. CONCLUSIONS : Based on the domestic and international heavy snow researches, the elements for vulnerability were analyzed and vulnerable areas to snow fall were derived.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.353-357
• /
• 2010

Recently, silicon etching have received much attention for display industry, nano imprint technology, silicon photonics, and MEMS application. After the etching process, removing of etch mask and residue of sidewall is very important. The investigation of the etched mask removing was carried out by using the ashing, HF dipping and acid cleaning process. Experiment shows that oxygen component of reactive gas and photoresist react with silicon and converting them into the mask fence. It is very difficult to remove by using ashing or acid cleaning process because mask fence consisted of Si and O compounds. However, dilute HF dipping is very effective process for SiOx layer removing. Finally, we found optimized condition for etched mask removing.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.3
• /
• pp.271-275
• /
• 2016

Recently, pollution problem in coastal water has become more serious and pollution including red tide serves as a main reason for reduction of fishes resources. Particularly, nutrients such as nitrogen and phosphorus are the most serious pollutants. Normally, biological wastewater treatment process is used in removing such nutrients. However, it is difficult to adopt the biological wastewater treatment process to a small-scale fish processing factory in case of using seawater as wash water. Thus, removing nutrients through struvite crystallization is investigated in this study for treating shrimp processing wastewater. Experiments were conducted by varying molar ratio of $Mg^{2+}:NH^4-N:PO^4-P$ from 1:1:1 to 2:1:1. It can be concluded that optimum molar ratio is 1:1:1. Struvite crystallization process is compared with chemical coagulation process using PAC and struvite crystallization process is proven as the more effective process in removing nutrients from wastewater. In view of results obtained from these experiments, struvite crystallization process is a promising method in removing nitrogen and phosphorus from wastewater; however, not so good in removing organics. Thus, struvite crystallization process is suitable as the pre-treatment process in treating shrimp processing wastewater and additional biological process is needed to remove organics.