• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.23-34
• /
• 2011

Recently, carelessness on safety management in construction sites has caused a sharper upward trend in accidents and disasters, compared to the past. Therefore, this study analyzes the causes of accidents that occurred on construction sites in the year of 2010, and proposes preventive measures. The construction industry had a heavy death rate with 279 out of 418 deaths from falls in all industrial sites, accounting for 66.7%. And the causation analysis found a particularly high incidence of temporary structure-related accidents, with falling off scaffolding as the most common cause of accidents. According to the causation analysis of fall-down accident cases, accidents induced by protrusion on construction sites are a big contributor resulting in the deaths of 312, accounting for 74.8%, which is deemed to be due to site disorderliness. And to remove floor protrusions and to secure workers' traffic line and safety, neat and thorough site arrangement is necessary. Against collision, efforts must be made to prevent equipment-pedestrian crashes on site, which necessarily requires emergency lamps, alarm bells, and safety poles and blocks to be installed, lighting systems to be improved, obstacles to be removed, site supervisors to be assigned to construction equipment works, and workers to be more intensely trained and supervised.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.3
• /
• pp.25-39
• /
• 2020

This study analyzed the management plan of Seomjin River Chimsil Wetland by identifying landscape changes through aerial photographs analysis and concentrations of sedimentation. Geophysical Landscape Change Analysis showed that vegetation accounts for more than half of the total area. The Barren land and water body was somewhere repeatedly increased and decreased and made an irregular form in the study area. The soil was acidic, and no eurtophication was shown, but it was potential to form wetland. In addition, the research area has been terrestrification of sand bar for a long period of time, forming a soil layer. Although the characteristics of river deposits were shown in the study area, the grain size was a particulate matter, and the sorting was 'very poorly sorted'. In some areas of Seomjin River Chimsil Wetland, sand bars were formed, but most areas were undergoing to terrestrification. Therefore, in order to preserve the riverine area and to serve by a bridge between the land ecosystem and the underwater ecosystem, it is very necessary to remove some vegetation, create a proper waterway, and restore the wetland.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.143-167
• /
• 2015

This paper addresses the issue how the total life cycle cost may be minimized and how the cost should be allocated to the acquirer and developer. This paper differentiates post life cycle change (PLCC) endeavors from PLCC activities, rigorously classifies PLCC endeavors according to the result of PLCC endeavors, and rigorously defines the life cycle cost of a software product. This paper reviews classical definitions of software 'maintenance' types and proposes a new typology of PLCC activities too. The proposed classification schemes are exhaustive and mutually exclusive, and provide a new paradigm to review existing literatures regarding software cost estimation, software 'maintenance,' software evolution, and software architecture from a new perspective. This paper argues that the long-term interest of the acquirer is not protected properly because warranty period is typically too short and because the main concern of warranty service is given to removing the defects detected easily. Based on the observation that defects are caused solely by errors the developer has committed for software while defects are often induced by using for hardware (so, this paper cautiously proposes not to use the term 'maintenance' at all for software), this paper argues that the cost to remove defects should not be borne by the acquirer for software.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.86-95
• /
• 2003

The object of this paper is to correct check the tree situation and quantity around highway. Also, those data utilize in order to establish plan about how to the long and short term landscape construction and maintain program. The result of this study can be summarized as follows; 1. Tree decrease rates for 8 branch offices were Jongbu(5.62%), Gangwon(4.32%), Chungcheong (3.35%), Honam(5.62%), Gyeongbuk(3.06%), Gyeongnam(5.60%), Seorak training center(0.31%), Headquarter(1.54%). Also decrease causes were traffic accidents(1.8%), air po11ution(4.7%), humid damage(0.9%), insect and disease(1.2%), wind and rainfall(3.4%), dry damage(3.5%), cold damage (1.0%), fire(3.1%), damage of the man and anima1(4.1%), remove bad tree(13.1%), bad rooting(9.5%) and etc.(53.7%). 2. Improve methods of tree death problems were regulation management(ferti1ize, irrigation and pesticide work), improvement of draining system, Pull out the weeds, Plant native plants, utilize organic matter fertilize and plant environment trees.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.248-257
• /
• 2011

Cross docking is a logistics management concept in which items delivered to a terminal by inbound trucks are immediately sorted out, routed and loaded into outbound trucks for delivery to customers. Two main advantages by introducing a cross docking terminal are to consolidate multiple smaller shipment into full truck load and remove storage and order picking processes to save up logistics costs related to warehousing and transportation costs. This research considers the scheduling problem of trucks in the cross docking terminals with multi-door in an inbound and outbound dock, respectively. The trucks sequentially deal with the storage process at the one of inbound doors and the shipping process at the one of the outbound doors. A mathematical model for an optimal solution is derived, and genetic algorithms with two different chromosome representations are proposed. To verify performance of the GA algorithms, we compare the solutions of GAs with the optimal solutions and the best solution using randomly generated several examples.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2151-2159
• /
• 2015

Pancreatic neuroendocrine tumors (pNETs) are rare and heterogenous tumors and surgery to remove the primary tumor is the mainstay of treatment for resectable disease. However, curative surgery is often not feasible, because half of patients with pNET have metastases at the time of diagnosis. Palliative dubulking surgery and liver-directed therapies are appropriate options for these patients. Streptozocin-based regimens are standard, although temozolamide-based treatments are rapidly gaining wide clinical application. Somatostatin analogs are mainly indicated in hormonally active tumors to ameliorate symptoms. In addition, anti-tumoral activity has been proven in well-differentiated NETs. Recently, there has been tremendous progress in the molecular biology of pNETs; thereby, the efficacy of sunitinib and everolimus in the treatment of patients with metastatic pNETs has been proven by large placebo-controlled phase III trials. Currently, there are no definitively proven predictive biomarkers to evaluate response to medical therapies in patients with pNET. Therefore, further studies are needed to individualize and optimize their management. This article reviews systemic chemotherapy, targeted therapies, and anti-secretory treatments for the management of patients with unresectable or metastatic pNETs, summarized in the light of recent advances.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.355-357
• /
• 2004

With the introduction to ebXML and web service related standards, enterprises struggle to adapt to the rapidly evolving technology to meet the complex needs of the enterprise customer. The ability to integrate and interoperate individual services within enterprise and with other enterprise's information technology infrastructure using standard-based business processes is an important element of business process management system. For over 25 years EDI has established VAN based solution of exchanging business information in electronic form. However EDI solutions are only accessible to large organizations due to the cost factor. Moreover lack of well accepted B2B business process standards is hindering the success of promoting interoperability between organizations of any size. ebXML work is focused on defining the standard B2B business process context and its runtime semantics in order to remove these hindrances. However ebXML framework does not recommend any particular implementation model to interact with enterprise internal system. This paper propose a end to end business process management architecture by applying ebXML in the front end of the enterprise system and using BPEL to integrate front end services into related services within enterprise.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.399-404
• /
• 2008

The objective of this study is to develop the predicting method of concrete strength when remove concrete form-work without making cement test piece at construction site. For this purpose, this study catches the Maturity Method by using RFID, the usability of which is now being emphasized at site, accumulates and record the strength data, which can be gained with the results of existing Maturity Method method that is accompanied with strength estimation study, in database, and finally proposes the system structure which can check the estimated strength by Maturity Method. The merits of this method by using of Maturity Method are as follows; More objective, precise, and rapid decision can be made to the concrete strength and about the maintaining period of concrete form and form support. More efficient control of integrated material management system can be possible. Architectural field example using RFID can be suggested more concretely. RFID applicability can be extended by using DB of material integration management system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2862-2882
• /
• 2023

With the development of networking technology, it has become common to use various types of network services to replace physical ones. Among all such services, electronic voting is one example that tends to be popularized in many countries. However, due to certain concerns regarding information security, traditional paper voting mechanisms are still widely adopted in large-scale elections. This study utilizes blockchain technology to design a novel electronic voting mechanism. Relying on the transparency, decentralization, and verifiability of the blockchain, it becomes possible to remove the reliance on trusted third parties and also to enhance the level of trust of voters in the mechanism. Besides, the mechanism of blind signature with its complexity as difficult as solving an elliptic curve discrete logarithmic problem is adopted to strengthen the features related to the security of electronic voting. Last but not least, the mechanism of self-certification is incorporated to substitute the centralized certificate authority. Therefore, the voters can generate the public/private keys by themselves to mitigate the possible risks of impersonation by the certificate authority (i.e., a trusted third party). The BAN logic analysis and the investigation for several key security features are conducted to verify that such a design is sufficiently secure. Since it is expected to raise the level of trust of voters in electronic voting, extra costs for re-verifying the results due to distrust will therefore be reduced.