• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.100-107
• /
• 2005

As a result of this study, vitality of natural monuments (large trees) looks relatively good but they require continuous management. Also, the management for condition recovery and condition maintenance, and minimum measures are needed at least to avoid natural calamity. Major points induced are as follows : The first, although most of natural monument large trees showed favorable growth environment, most of them are aged and have dense twigs with requirement for weed trimming to remove complicated and unnecessary branches. In addition, as most of large trees grow alone in a large space with potential natural calamity, thus, minimum measures are required at least. Secondly, change in electric resistance in surveyed large trees was relatively favorable, however, large trees with soil covering showed high electric resistance and were found to have low vitality. As shown, this study was conducted to find out the measurement techniques of natural monuments, Basic foundation is suggested through the measurement of electric resistance, and the vitality of natural monuments; more accurate investigation will be remained for further discussion.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.691-697
• /
• 2013

Recently, u-healthcare device is developed and commercialized for healthcare management and emergency medical. The kinds of the measurable biomedical signals on the device are electrocardiogram, skin temperature, pulse oxygen, heart rate, respiration, etc. Specially, the photoplethysmograph(PPG) signal of these signals is the important signal in measuring oxygen, heart rate and peripheral vascular compliance. The accuracy of PPG signal reduce from influence of the motion artifacts that generated from the movements of user or patient. Therefore, this study suggests a new method to remove the motion artifact that is using optical power modulation and ICA(Independent Component Analysis). For analyzing the proposed method, we used variety of noises made by artificially. In the results of experiments, the proposed method showed good performances than an adaptive filter.

• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.653-662
• /
• 2012

We evaluate the technical and organizational aspects of the severe accident management guideline (SAMG), focusing on the decision-making process in the technical support center (TSC). From the technical aspects, we conclude that the present SAMG is a good tool that can assist the TSC in efficiently managing probable severe accidents. However, we suggest that the clear separation of the emergency operating procedure (EOP) and SAMG, which shifts plant control from the main control room (MCR) to the TSC, might not be an effective framework from an organizational perspective. Studies on organizational behavior demonstrate that a group decision made under a risky situation might be polarized in either a risky or cautious way. We recognize that we cannot be free from the polarization effect since the current SAMG recommends that the TSC evaluate the advantages and disadvantages of strategies to be implemented and choose the best one based on a group decision process. Illustrative examples of accident management under risky conditions are recapitulated from previous studies of the authors and we propose that the SAMG should be more proceduralized to remove this polarization from the decision-making process.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.71-78
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.453-461
• /
• 2011

In order to use more efficiently limited frequency resources at the broadcasting band and to eliminate blanket area of the terrestrial broadcasting and to improve broadcasting quality. The importance of repeaters has increasing continuously. However, in case of T-DMB digital on channel repeater in OFDM systems, some of the signal radiated feedback again at the receiver antenna. So it generates feedback signal interference in repeater system. Also phase noise increases ICI(Inter Carrier Interference). It affects seriously the frequency domain equalizer. In this paper, we remove the feedback signal interference by LMS with correlation. Also we propose an effective equalizer algorithm that can remove ICI caused by phase noise and the power amplifier's back-off. In this simulation results, this system is satisfied the performance of BER=$10^{-4}$ at less than SNR=14 dB after compensation of phase noise.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.83-89
• /
• 2012

In this study, FDS fire simulation experiments and measured wind speed by applying the exterior installation portion for blocking the spread of the fire was investigated. As a result, aluminum composite panels installed in the lower and the upper part of the panel to remove all the lower side, and then the maximum wind speed 0.24 m/s and the upper side 0.58 m/s were measured. In the FDS, the measured wind speed difference air currents are approximately 3.7 times in 12 seconds, the occurrence of 17 seconds early moment wind 2.2 m/s was measured from. Before and after the fire occurred in early of the air velocity about 39 seconds was 3.5 times difference. Such air currents caused by the temperature of the building but also by the building height was found. Turbulent flame of fire by expanding the vertical extent of damage become greatly important factor. Therefore, through the exterior installation portion of the block that can delay the spread of fire is expected that this should be taken.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.435-437
• /
• 2016

Hadoop Distributed File System(HDFS) is a file system for distributed processing of big data by replicating data to distributed data nodes. HDFS cluster shows a great scalability up to thousands of nodes, but it assumes a exclusive node cluster with numerous nodes for the big data processing. Various operational-purpose worker systems used by office are hardly considered as a part of cluster. This paper discusses this problem and proposes a dynamic cluster management technique to increase storage capability and analytic performance of hadoop cluster. The propsed technique can add legacy systems to the cluster and can remove them from the cluster dynamically depending on their availability.

• Archives of Plastic Surgery
• /
• v.46 no.1
• /
• pp.88-91
• /
• 2019

The burn center in our hospital is a national and regional (Southeast Asia) center. Of all admissions, 10% are related to blast explosions, and 8% due to chemical burns. In the acute burn management protocol of Singapore General Hospital, early surgical debridement is advocated for all acute partial-thickness burns. The aim of early surgical debridement is to remove all debris and unhealthy tissue, preventing wound infection and thereby expediting wound healing. In chemical burns, there can be stubborn eschars that are resistant to traditional debridement. We would like to present a novel technique using the diathermy scratch pad as a cheap and efficient tool for the dual purpose of surgical debridement and dermabrasion.

• Structural Engineering and Mechanics
• /
• v.88 no.6
• /
• pp.569-581
• /
• 2023

This paper introduces a system to detect and diagnose anomalies in pumped storage hydropower plants. We collect data from various types of sensors, including those monitoring temperature, vibration, and power. The data are classified according to the operation modes (pump and turbine operation modes) and normalized to remove the influence of the external environment. To detect anomalies and diagnose their types, we adopt a multivariate normal distribution analysis by learning the distribution of the normal data. The feasibility of the proposed system is evaluated using actual monitoring data of a pumped storage hydropower plant. The proposed system can be used to implement condition monitoring systems for other plants through modifications.