• 상하수도학회지
• /
• 제19권1호
• /
• pp.53-60
• /
• 2005

Ferrous cement hydrates made from hydrating Portland cement doped with Fe (II) were reported to reductively dechlorinate chlorinated organics and to reduce Cr (VI) to Cr (III). In this study, kinetics of nitrate removal by ferrous cement hydrates were investigated. Nitrate removal kinetics were characterized by experimental variables such as cement hydration, amount of cement addition, Fe (II) dose, pH, and byproducts. As a result, hydrated cement showed better performances than non-hydrated cement due to the formation of LDH (layered double hydroxide). Doping of Fe (II) into the cement was found to improve removal efficiency at high pHs by association with Fe (II) sorbed on cement hydrates as a reactive reductant. Reduction of nitrate produced ammonium as a major product, which accounted for 63.5% of the final products, and nitrite (0.15%) as a minor product. These results indicate that the developed media are effective as sorbent/reducing agents in the nitrate removal and the reaction mechanisms of nitrate removal are sorption and reduction.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.109-114
• /
• 2005

본 연구에서는 기상용 제오카본을 수처리에 적합하도록 염산으로 표면 개질 하였으며, 개질된 제오카본을 이용하여 단일 공정을 통한 암모니아성 질소와 질산성 질소 동시 제거 가능성을 평가하고자 하였다. 제오카본과 비교하여 표면 개질 제오카본의 강도가 62% 정도 증가하였으며, 암모니아성 질소와 질산성 질소 및 총질소 제거율이 약 2배 증가하였다. 또한 암모니아성 질소와 질산성 질소 제거 효율은 pH 및 온도 변화에 거의 영향을 받지 않았다. 따라서 수중에 존재하는 암모니아성 질소와 질산성 질소의 동시 제거가 매우 효과적으로 이루어질 수 있었으며, 본 연구 결과를 토대로 암모니아성 질소와 질산성 질소를 동시 제거할 수 있는 단일 공정 설계를 위한 기본 데이터 제시가 가능하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권2호
• /
• pp.36-43
• /
• 2003

질산성 질소 제거를 위해 미셀 형성을 이용한 한외여과(MEUF)공정의 타당성을 양이온성 계면활성제인 octadecylamine acetate(ODA)와 cetylpyrinidium chloride(CPC)를 사용하여 조사하였다. 3 몰비의 계면활성제를 가지고 최소 80%의 질산성 질소를 제거할 수 있었으며, 10 몰비의 계면활성제로는 98％ 이상의 제거율을 얻을 수 있었다. ODA가 CPC 보다 높은 질산성 질소와 계면활성제 제거율을 보였으며, 이는 계면활성제 구조상 ODA의 머리부분이 CPC의 머리부분보다 질산성 질소의 접근이 용이하기 때문이다. MEUF공정은 질산성 질소를 효과적으로 제거할 수 있으며, CPC보다 ODA가 질산성 질소를 제거하기 위해 더 바람직한 계면활성제이다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.131-134
• /
• 2004

Several physical and chemical methods have been used for remediation contaminated by oils. However the cost was very high and secondary pollution rose during treating. The purpose of this study was to comprision TPH (total petroleum hydrocarbon) removal from artificially contaminated soil by diesel with and without seeding anaerobic digested sludge. After 120 days of overall at 35$^{\circ}C$, removal efficiency of TPH with seeding sludge was 2-3 times higher than blank. Also, the more amount seeding sludge, TPH removal efficiency and CH$_4$ content more obtained. It was sad that seeding of anaerobic digested sludge was a good method for enhancing TPH removal efficiency without increasing operating cost. Sulfate, nitrate-reducing, methanogenic condition were evaluated for alkane, isoprenoid as target contaminated soil.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.190-196
• /
• 2007

본 연구에서는 전기화학적 처리공정을 이용하여 전극판 종류에 따른 질산성 질소의 농도별 제거효율을 살펴보았고, 여기서 선정된 전극으로 운전조건(pH 변화, 전류밀도, 환원제, 교차전류)을 변화시켜 질산성 질소 제거효율, 에너지소모량에 따른 최적운전조건을 평가하였다. 또한 단일공정에 의한 처리가 아닌 다단계 전기화학적 처리를 통한 질산성 질소 제거 실험을 진행하였다. 100 mg $NO_3^{-}$ -N/L 농도로 실험한 결과에서 동일 전극인 경우 Zn-Zn 전극판, 불용성 산화전극 백금(Pt)인 경우 Pt-Ti 전극에서 높은 질산성 질소 제거효율을 나타내었다. 150 mg $NO_3^{-}$ -N/L에서 Zn-Zn 전극판인 경우 pH 조절없이 전기분해한 결과 70~85%, 불용성 산화전극인 백금(Pt)인 경우 Pt-Ti 전극에서 40~50%의 질산성 질소 제거효율을 나타내었다. 그리고 고농도인 500, 1,000 mg $NO_3^{-}$ -N/L 질산성 질소 제거 실험결과, 농도가 증가할수록 제거효율은 감소하는 경향을 보이지만 에너지 소모량에 대한 질소 제거효율은 증가하였다. 다단계 전기화학적 처리 실험결과, Test 4 조건을 최적의 조건으로 선정하였으며 그 이유는 다음과 같다. 첫 번째, 1단계에서 소모된 Zn 양극의 대부분을 2단계 이후 공정에서 회수하였고, 두 번째, 2단계 이후에서는 불용성 백금을 산화전극으로 사용함으로써 전극 소모 가능성을 줄였으며, 마지막으로 Zn을 환원전극으로 사용함으로써 Zn의 재이용 가능성을 높였다. 따라서, 질소를 함유한 표면처리 폐수 처리에 전기화학적 공정이 적용될 수 있을 것으로 판단된다.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.111-116
• /
• 2012

This study investigates the complete removal of nitrate and the recovery of valuable ammonium salt by the combination of nanoscale zero-valent iron (NZVI) and a membrane contactor system. The NZVI used for the experiments was prepared by chemical reduction without a stabilizing agent. The main end-product of nitrate reduction by NZVI was ammonia, and the solution pH was stably maintained around 10.5. Effective removal of ammonia was possible with the polytetrafluoroethylene membrane contactor system in all tested conditions. Among the various operation parameters including influent pH, concentration, temperature, and contact time, contact time and solution pH showed significant effects on the ammonia removal mechanism. Also, the osmotic distillation phenomena that deteriorate the mass transfer efficiency could be minimized by pre-heating the influent wastewater. The ammonia removal rate could be maximized by optimizing operation conditions and changing the membrane configuration. The combination of NZVI and the membrane contactor system could be a solution for nitrate removal and the recovery of valuable products.

• 환경위생공학
• /
• 제13권2호
• /
• pp.95-105
• /
• 1998

This research was investigated which denitrification of wastewater containing nitrate, using upflow anaerobic sludge blanket process. The upflow anaerobic sludge blanket process is also used for both artifical and industrial wastewater. Main ingredients investigated in the artifical and industrial wastewater experiment were the determination of optimum organism/nitrate ratios, nitrate removal efficiency by various hydrogen donor addition and characteristics of granular sludge and gas production in case of various hydrogen donor addition. From the experimental results the following conclusions were made: In case of adding methanol, ethanol and sodium acetate as hydrogen donor granular sludge was formed 50 days after seeding. Average diameter of granular sludge was 4.0 mm and settling velocity was 37 cm/min. Production rate of gas 3.3 L/d in case of adding methanol as hydrogen donor in wastewater containing 150mg/L nitrate. However adding ethanol and sodium acetate as hydrogen donor, gas production rate were 2.2-2.7L/d respectively. In case of adding methanol as hydrogen donor treatability of artifical wastewater contained 150mg/L as nitrate was about 93%. But in addition of sodium acetate in wastewater contained 40mg.L as nitrate, nitrate removal efficiency was 80%.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.307-314
• /
• 2008

In this study, the effects of applied voltage, solution pH and coexistence of other ions such as sulfate ion (${SO_4}^{2-}$) and chloride ion ($Cl^-$) were investigated on the removal of nitrate-nitrogen ($NO_3{^-}-N$) from ground water by electrodialysis. The examined operating conditions were evaluated for optimizing the removal efficiency of $NO_3{^-}-N$. Real ground water samples taken from a rural area of Yongin city and artificial ones with components similar to the real ground water were tested for the study, which contained $NO_3{^-}-N$ concentration of 17mg/L that exceeds current drinking water quality standard of 10 mg/L. The increase in the removal rate of $NO_3{^-}-N$ was observed as the applied voltage increased from 5V to 30V, while no significant increase in the removal rate appeared at the applied voltage beyond 20V during a given operating time. The removal rate appeared to get lower at both acidic and basic condition, compared to neutral pH. Coexistence of of ${SO_4}^{2-}$and $Cl^-$ demanded much longer operating time to achieve a given removal rate or to meet a certain level of treated water concentration. When nitrate ion was combined with ${SO_4}^{2-}$and $Cl^-$, the removal rate was reduced by 4.29% and 10.83%, respectively.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.443-448
• /
• 2019

The present study was conducted to compare the voltage generation in two-chamber microbial fuel cells (MFCs) with a biocathode where nitrate and oxygen are used as a terminal electron acceptors (TEA) and to investigate the nitrogen removal and the electrochemical characteristics depending on the separators of the MFCs for denitrification. The maximum power density in a biocathode MFC using an anion exchange membrane (AEM) was approximately 40% lower with the use of nitrate as a TEA than when using oxygen. The MFC for denitrification using an AEM allows acetate ($CH_3COO^-$) as a substrate and nitrate ($NO_3{^-}$) as a TEA to be transported to the opposite sides of the chamber through the AEM. Therefore, heterotrophic denitrification and electrochemical denitrification occurred simultaneously at the anode and the cathode, resulting in a higher COD and nitrate removal rate and a lower maximum power density. The MFC for the denitrification using a cation exchange membrane (CEM) does not allow the transport of acetate and nitrate. Therefore, as oxidation of organics and electrochemical denitrification occurred at the anode and at the cathode, respectively, the MFC using a CEM showed a higher coulomb efficiency, a lower COD and nitrate removal rate in comparison with the MFC using an AEM.

• Journal of Microbiology and Biotechnology
• /
• 제16권5호
• /
• pp.678-682
• /
• 2006

To remove nitrate from wastewater, a novel bioelectrochemical denitrification system is introduced. In this proposed system, biological reactions are coupled with reactions on the electrode, whereby the electrons are transferred to the bacterial enzymes via a mediator as an electron carrier. The denitrification reaction was achieved with permeabilized Ochrobactrum anthropi SY509 containing denitrifying enzymes, such as nitrate reductase, nitrite reductase, and nitrous oxide reductase, and methyl viologen was used as the mediator. The electron transfer from the electrode to the enzymes in the bacterial cells was confirmed using cyclic voltammetry. A high removal efficiency of nitrate was achieved when the bioelectrochemical system was used with the permeabilized cells. Furthermore, when the permeabilized cells were immobilized to a graphite felt electrode using a calcium alginate matrix containing graphite powder, a high removal efficiency was achieved (4.38 nmol/min mg cell) that was comparable to the result when using the free permeabilized cells.