• 제목/요약/키워드: removal catalyst

검색결과 410건 처리시간 0.022초

소각로 SCR 폐탈질 촉매의 피독과 효율재생에 관한 연구 (Deactivation and Regeneration of a Used De-NOx SCR Catalyst for Wastes Incinerator)

  • 이상진;홍성창
    • 공업화학
    • /
    • 제19권3호
    • /
    • pp.259-263
    • /
    • 2008
  • 소각로에서 발생한 다이옥신 및 질소산화물 제거용 폐탈질 촉매($V_2O_5/TiO_2$)의 비활성화 원인을 규명하고자 반응 활성 실험 및 물리 화학적 특성 분석을 수행하였으며, 다양한 재생방법을 통한 폐탈질 촉매의 재생효율을 연구하였다. 고정층 실험 결과 $260^{\circ}C$를 기준으로 약 60% 정도 질소산화물 제거 활성 차이를 보였으며, 허니컴 실험의 경우 1, 2-Dichlorobenzen (1, 2-DCB) 분해효율이 $200^{\circ}C$에서 약 14% 정도 차이가 나타났다. 또한 촉매의 비활성화 원인을 연구하기 위해서 신촉매와 폐촉매에 대하여 XRD, TGA, 그리고 ICP의 특성 분석을 실시한 결과 황산 암모늄염, 중금속(Pb, As 등), 전이금속(Fe 등), 알칼리 금속(Ca), 그리고 상전이가 촉매의 비활성화 원인으로 조사되었다. 또한, 폐촉매의 재생을 위해 다양한 방법으로 처리한 결과 수세과정을 배제한 공기분위기에서 열처리한 경우 우수한 재생효과를 나타내었다.

질소 정제 시스템의 산소 제거용 구리계 촉매 연구 (A Study on Cu-based Catalysts for Oxygen Removal in Nitrogen Purification System)

  • 오승교;성민준;전종기
    • 청정기술
    • /
    • 제27권1호
    • /
    • pp.9-16
    • /
    • 2021
  • Active Matrix Organic Light-Emitting Diode (AMOLED) 봉지 공정은 수분과 산소에 매우 취약하기 때문에, 수분과 산소의 함량이 최소화된 고순도의 질소를 사용하여야 한다. 본 연구의 목적은 AMOLED 봉지 공정에 사용하는 질소에서 산소를 제거하기 위한 용도로 사용되는 구리계 촉매를 최적화하는 것이다. CuO, Al2O3, 또는 ZnO의 조성으로 이루어진 2성분계 및 3성분계 촉매를 공침법을 통해서 제조하였다. 제조된 촉매들을 BET, XRD, TPR, XRF의 분석장비를 활용하여 촉매의 특성을 분석하였다. 촉매의 산소 제거 성능을 확인하기 위해 고정층 반응기에서 촉매 산소 제거 반응 실험을 수행하고 산소 분석기를 통해 산소 함량을 측정하였다. 또한 사용된 촉매의 반복 재생을 통해 촉매의 재사용 성능을 검증하였다. CuO와 Al2O3 비율이 6 : 4, 7 : 3 및 8:2로 제조된 2 성분계 촉매의 특성과 산소 제거 능력을 비교하였다. CuO와 Al2O3의 비율이 8:2인 촉매의 환원성이 가장 높았는데, 이는 CuO의 분산도가 가장 높기 때문이다. 결과적으로, 2성분계 촉매 중에서 CuO와 Al2O3의 비율이 8 : 2 인 촉매의 산소 제거 능력이 가장 우수한 것으로 나타났다. CuO : Al2O3 의 비율이 8:2인 촉매에 ZnO를 2 wt% 넣어준 촉매가 3성분계 촉매 중에는 가장 우수한 산소제거 능력을 보였으며, 이는 뛰어난 환원성에 기인한다고 할 수 있다. 또한 이 촉매는 재생 실험을 통해서도 산소 제거능력이 유지된다는 것을 확인하였다.

Estimation of VOCs Emissions from Small-Scale Surface Coating Facilities in Seoul

  • Jin-Ho, SHIN;Woo-Taeg, KWON
    • 웰빙융합연구
    • /
    • 제6권1호
    • /
    • pp.17-22
    • /
    • 2023
  • Purpose: VOCs (volatile organic compounds) are all the organic compounds that react with solar rays and increase the concentration of ozone in the troposphere and are partially also known as carcinogens. The adsorption using activated carbon is usually applied to remove VOCs. Research design, data and methodology: The 20 places of surface coating facilities were selected to evaluate the emission amount of VOCs in Seoul. In addition, the removal efficiency of VOCs in 25 places of automobile coating facilities was evaluated. Results: The average emission amount of VOCs was 10.903 kg/hr from automobile coating facilities, while 3.520 kg/hr from other surface coating facilities. The removal efficiency in adsorption with the combustion catalytic process has the mean value of 87.9% and the regeneration efficiency of activated carbon has the mean value of 95.0%. Conclusions: The removal efficiency in adsorption with the biofiltration process has the mean value of 89.8% and the regeneration efficiency of activated carbon has the mean value of 94.8%. The removal efficiency in the plasma catalyst process has the mean value of 79.3%.

광촉매제를 사용한 콘크리트 보도블록의 제조 및 특성 (Manufacture and Characteristics of Concrete Sidewalk Blocks Using Photocatalyst Agent)

  • 정용욱;장준호;김종규
    • 한국건설순환자원학회논문집
    • /
    • 제7권4호
    • /
    • pp.423-430
    • /
    • 2019
  • 본 연구에서는 콘크리트 보도블록의 표층에 광촉매를 적용하여 광촉매 혼입률 및 블록 표면워싱 유무 등에 따른 휨강도, 흡수율, 메틸렌블루 광촉매 분해 성능 및 방오성능을 평가하였다. 실험결과, 콘크리트 블록 표면층에만 광촉매를 혼입한 블록의 휨강도는 광촉매 무혼입인 기준콘크리트 블록의 휨강도 5.46MPa과 비교하여 광촉매 5% 혼입 일반블록(SNW) 5.32MPa로 나타났으며, 표면워싱블록(SW) 5.26MPa, 광촉매 10%혼입 일반블록(SNW) 5.26MPa, 표면워싱블록(SW) 5.15MPa로 나타나 콘크리트 블록의 표면 워싱 유무 및 광촉매 혼입율이 휨강도에 미치는 영향은 없는 것으로 나타났다. 또한 콘크리트 보도블록의 광촉매 분해성능은 이산화티타늄이 5% 혼합된 시편의 메틸렌블루 제거율은 34.2%, 이산화티타늄이 10% 혼합된 시편의 메틸렌블루 제거율은 37.1%, 세척을 실시한 경우 이산화티타늄이 5% 혼합된 시편의 경우 제거율은 약 37.9%, 10% 혼합된 시편의 메틸렌블루 제거율은 약 37.6%로 나타났다.

기-액 복합 광반응기에서의 악취성 암모니아 제거를 위한 촉매개발과 반응시스템의 최적조건 색출 연구 (The Studies of Photocatalyst Development and the Optimum Operation Conditions for the Removal of Ammonia in a Mixed Reactor of Liquid-vapor Phase)

  • 김해리;전민규;김준우;주광태;정석진
    • 한국대기환경학회지
    • /
    • 제24권5호
    • /
    • pp.512-522
    • /
    • 2008
  • Ammonia is a major compound of odor in livestock house. To enhance the performance of ammonia oxidation (decomposition). the gas-liquid, two phase photocatalytic oxidation system was designed and prepared in this study. Commercial P-25 as $TiO_2$ catalyst was used for ammonia decomposition. V/P-25 catalyst prepared by sol gel method was also used for the removal of by-producted $NO_x$ in $NH_3$ oxidation reaction. When $TiO_2$ was used as a photocatalyst, the conversion to $N_2$ in ammonia decomposition reached above 90% until 200hr (The air flow rate of 4L/min with the ammonia concentration up to 25ppm.). However, considerable amounts of NO and $NO_2$ were formed as a result of $NH_3$ oxidation (as a by-product). Therefore, we added Vanadia impregnated $TiO_2$(P-25) catalyst for the removal of $NO_x$ at the end of reaction trail. The results of a pilot-scale operation were successful to achieve the simultaneous removal of $NH_3\;and\;NO_x$ about 81 and 87%, respectively.

환원촉매를 이용한 디젤엔진 배기가스 중 NOx 저감에 관한 연구 (A Study on Removal of NOx in Diesel Engine using Reductive Catalyst)

  • 황화자;황재원;정지웅;한정희;;채재우
    • 대한환경공학회지
    • /
    • 제22권12호
    • /
    • pp.2255-2261
    • /
    • 2000
  • 본 연구에서는 질소산화물 저감기술의 하나인 선태적 촉매 환원법(SCR)을 이용하여 실제 디젤엔진에서의 $NO_x$저감에 관한 실험을 수행하였다. 특히 선택적 촉매 환원법 중에서 금속산화물(metal oxide)과, 페롭스카이트(perovskite)형의 환원촉매를 사용하였으며 ${\gamma}-Al_2O_3$ 담체에 여러 가지 주촉매, 조촉매를 사용하여 배기가스 온도 범위 내에서 높은 $NO_x$제거효율을 가지고 있는 $LaCuMnO_x$을 선택하였다. $NO_x$ 제거를 위한 실험은 실제 디젤엔진에서 배출되는 배기가스를 이용하였으며 공간속도 $3,300h^{-1}$인 상태에서 촉매 반응기 통과전후의 $NO_x$의 변화량을 측정하였다. 그 결과 페롭스카이트 형태의 촉매가 활성화 온도범위가 우수함을 알 수 있었고 $LaCuMnO_x$의 경우에는 촉매 온도범위 $150{\sim}450^{\circ}C$하에서 $NO_x$의 제거효율이 전반적으로 우수하였다.

  • PDF

플라즈마와 촉매를 이용한 농용 디젤기관 배기가스 중의 NOx 저감에 관한 실험적 연구 (An Experimental Study on NOx Reduction in Exhaust Gas from Agricultural Diesel Engine with Plasma and Catalyst)

  • 이승규;조기현;황의현
    • Journal of Biosystems Engineering
    • /
    • 제24권6호
    • /
    • pp.465-472
    • /
    • 1999
  • To remove nitrogen oxides(NOx) in exhaust gas of diesel engine, three-way catalytic process with plasma discharger has great possibilities. Characteristics of NOx removal depends on NO conversion to NO$_2$and/or HNO$_3$due to high activation energies for NO oxidation and reduction. NOx removal efficiency by using three-way catalytic with plasma discharger indicated about 50% at 40watt power consumption condition.

  • PDF

유해 유기화합물의 제거를 위한 폐 산업용 촉매의 이용에 관한 연구 (Study of using Waste Industrial Catalyst for the Removal of Harmful Organic Compounds)

  • 서성규;김상채
    • 한국대기환경학회지
    • /
    • 제20권5호
    • /
    • pp.663-670
    • /
    • 2004
  • The catalytic oxidation of benzene, toluene and xylene over a spent industrial catalyst (Pd-based) was investigated in a fixed bed flow reactor system. According to the priming condition, the properties of a spent Pd-based catalyst were characterized by XRD(X-ray diffraction). BET(Brunauer-Emmett-Teller) and ICP(Inductively coupled plasma). When air was used as a primer, optimum priming temperature was found to be 200$^{\circ}C$, and the catalytic activity decreased as the priming temperature increased. When a spent Pd-based catalyst primed with air at 200$^{\circ}C$ was re-treated with hydrogen at 200$^{\circ}C$, 300$^{\circ}C$ or 400$^{\circ}C$, respectively, the catalytic activity increased and thermal effect were negligible. $HNO_3$ aqueous solution priming resulted in slight decrease of the catalytic activity, with little effects on $HNO_3$ concentrations. The activity of a spent Pd-based catalyst with respect to VOC molecule was observed to follow sequence: xylene> toluene> benzene. Benzene. toluene and xylene could be removed to almost 100% by a spent Pd-based catalyst primed with hydrogen.

바나디아 촉매담지 세라믹 캔들필터를 이용한 질소산화물 제거기술 (Removal Technology of NOx Using V2O5/TiO2 Catalyst Impregnated Ceramic Candle Filters)

  • 이동섭;박진식
    • 한국환경과학회지
    • /
    • 제16권9호
    • /
    • pp.1077-1083
    • /
    • 2007
  • [ $V_2O_5/TiO_2$ ] catalyst impregnated ceramic candle filters are in principle, capable of performing shallow-bed dust filtration plus a catalytic reaction, promoted by a catalytic deposited in their inner structure. Pilot-scale $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters were prepared, characterized and tested for their activity towards the SCR reaction. The effect on NO conversion of operating temperature, gas hourly space velocity, amount of deposited catalyst, pressure drops and long-term experiment (life of catalytic filter) was determined. The following effects of $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters in SCR reaction are observed: (1) It increases the activity and widens the temperature window for SCR. (2) When the content of $V_2O_5$ catalyst increases further from 3 to 9wt.%, activity of NO increases. (3) NO conversion at first increases with temperature and then decreases at high temperatures (above $400^{\circ} over), possibly due to the occurrence of the ammonia oxidation reaction.