• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.611-620
• /
• 2010

This paper presents a new architecture, called "Power Electronics Remote Wiring and Measurement Laboratory (PermLAB)", that translates a common gateway interface (CGI) string from a remote web user to a web server connected to a 3-dimension switching matrix board, can be used to switch on and off, and to control a cluster of instruments and components. PermLAB addresses real-time connection, switching, and data acquisition over the Internet instead of using simulated data. A software procedure uses a signature system to identify each instrument and component in a complex system. The Web-server application is developed in HTML, JavaScript and Java, and in C language for the CGI interface, which resides in a controller portion of LabVIEW. The LabVIEW software fully integrates the Web sever, LabVIEW data acquisition boards and controllers, and the 3-dimensional switching matrix board. The paper will analyze a half-wave rectifier (AC - DC converter) circuit connected over the Internet using the PermLAB. PermLAB allows students to obtain real data by real-time wiring of real circuits in the laboratory using a "virtual breadboard" on the Web. The software for the Web-based 3-dimensional system is flexible, portable, can be integrated into many laboratory applications or expanded, and easily accessible worldwide.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.67-82
• /
• 2023

Linear array imaging sensors are widely used in remote sensing satellites. The final products of an imaging sensor can only be used when they are geometrically, radiometrically, and spectrally calibrated. Therefore, at the first stages of sensor design, a detailed calibration procedure must be carefully planned based on the accuracy requirements. In this paper, focusing on inherent optical distortion, a step-by-step procedure for laboratory geometric calibration of a typical push-broom satellite imaging sensor is simulated. The basis of this work is the simulation of a laboratory procedure in which a linear imager mounted on a rotary table captures images of a pin-hole pattern at different angles. By these images and their corresponding pinhole approximation, the correction function is extracted and applied to the raw images to give the corrected ones. The simulation results illustrate that using this approach, the nonlinear effects of distortion can be minimized and therefore the accuracy of the geometric position of this method on the image screen can be improved to better than the order of sub-pixel. On the other hand, the analyses can be used to proper laboratory facility selection based on the imaging sensor specifications and the accuracy.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.20-25
• /
• 1998

Solar irradiation controls the exchange of heat energy between atmosphere and land or ocean, and becomes an important factors to the radiance flux at the surface and the biosphere. In order to estimate solar irradiance and earth albedo In Korea peninsula during 1996, GMS date and paramaterization model was combinationally used. In clear sky, the paramaterization model was used to estimate solar iradiance. Also in cloudy sky, the earth albedo was used to calculate the Interceptive effect of solar irradiance. The hourly solar irradiance [the hourly earth albedo] showed generally very low values with <1.00 MJ/m$^2$hr [high values with >0.65] on the middle part (36.00-36.50$^{\circ}$S) and the Southeastern part (near 34.50$^{\circ}$S) in Korea peninsula, respectively. Satellite estimates (GMS data) with pyramometer measurements (in-situ data) were compared for 21 observed stations. Totally, correlation coefficient showed high values with 0.85. In the monthly variation, correlation coefficient of the spring and summer with rms=about 0.42 MJ/m$^2$hr was better than the autumn and winter with rms >0.5 MJ/m$^2$hr. Generally monthly variations of correlation coefficient between satellite estimetes and pyranometer measurements showed r=0.936 in clear sky during 1 year except only May, June, July and August.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.491-495
• /
• 1999

We compared the satellite observed temperature with the radiosonde observed temperature in the Korean Peninsula. The radiosonde observed data were obtained from four upper air observation stations in the Korean Peninsula from 1981 to 1998, and that was compared with the satellite observed data of the channel-2 and channel-4 of microwave sounding unit(MSU) on board NOAA series of polar-orbiting satellites. The radiosonde data were reconstructed into monthly radiosonde T$_{b}$ using MSU weighting function. The monthly climatology shows radiosonde T$_{b2}$ is higher than MSU T$_{b2}$ in summer. The correlation between MSU T$_{b2}$ and radiosonde T$_{b2}$ is 0.72-0.76 and 0.73-0.81 between MSU T$_{b4}$ and radiosonde T$_{b4}$.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1349-1351
• /
• 2003

In this paper, theoretical channels model of Synthetic Aperture Radiometer is presented. Based on this model, how amplitude imbalance, phase imbalance and mutual coupling between the different channels effect brightness temperature image retrieving is analyzed. The computer simulation results are also presented to find out the cause of the along-track streaks usually appeared in the retrieved brightness temperature image. In addition, a new system calibration approach is introduced to solve this problem.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.554-556
• /
• 2005

Meteorological imager on the Multi-functional Transport Satellite (MTSAT-IR), which has been operating formally since 28 June 2005, was intercalibrated with a polar orbit satellite [Aqua Moderate Resolution Imaging Spectroradiometer (Aqua/MODIS)] as a well-calibrated instrument. The intercalibration method used in this study was developed by the Cooperative Institute for Meteorological Satellite Studies (CIMSS). This was done for the infrared window channels. The differences of MTSAT-IR and MODIS were are -0.26 K for $11\;\mu m-IR$ window channel, 0.40 K for $12\;\mu m-IR$, window channel, and -0.67 K for $6.7\;\mu m-water$ vapor channel.

• 공학교육연구
• /
• 제3권2호
• /
• pp.14-23
• /
• 2000

본 논문은 인터넷을 이용한 공학 교육의 효과를 높이기 위한 수단으로서 원격 계측 실험실의 구축에 대하여 연구한 결과를 포함하고 있다. 최근에 멀티미디어를 이용한 가상 실험 실습실의 축이 가시화되고 있으나 실제 시스템을 대상으로 한 인터넷 실험 실습실은 널리 보급되고 있지 않다. 본 논문에서는 실험실 자동화를 위하여 사용된 GPIB제어 기술과 인터넷 연결 기술을 결합하여 원격으로 실험 실습이 가능한 시스템을 구축하였다. 함수발생기, LCR미터, 오실로스코우프에 대한 제어 프로그램을 구축하고 몇 가지 전자 회로를 대상으로 실험을 수행해 본 결과 다양한 종류의 실험을 원격으로 수행할 수 있으며 교육 효과 또한 매우 높음을 발견할 수 있었다. 본 연구에서는 원격 계측 실험실 구축과 관련된 기술을 소개하고 문제점을 토의하고자 한다.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.579-586
• /
• 2010

This paper presents the organisation and the technical structure of a remote controlled laboratory in the field of high dynamic drives and motion control. It is part of the PEMCWebLab project with the goal of providing students with practical experience on real systems in the field of power electronics and drives. The whole project is based on clear targets and leading ideas. A set of experiments can be remotely performed on a real system to stepwise identify a two axes positioning system and to design different cascaded control loops. Each single experiment is defined by its goals, the content of how to achieve them, and a verification of the results as well as the achieved learning outcomes. After a short description of the PEMCWebLab project, the structure of the remote control is presented together with the hardware applied. One important point is error handling as real machines and power electronics are applied. Finally, a selection of experiments is presented to show the graphical user interface and the sequence of the laboratory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권12호
• /
• pp.3364-3382
• /
• 2023

Remote sensing image segmentation plays an important role in realizing intelligent city construction. The current mainstream segmentation networks effectively improve the segmentation effect of remote sensing images by deeply mining the rich texture and semantic features of images. But there are still some problems such as rough results of small target region segmentation and poor edge contour segmentation. To overcome these three challenges, we propose an improved semantic segmentation model, referred to as MRU-Net, which adopts the U-Net architecture as its backbone. Firstly, the convolutional layer is replaced by BasicBlock structure in U-Net network to extract features, then the activation function is replaced to reduce the computational load of model in the network. Secondly, a hybrid multi-scale recognition module is added in the encoder to improve the accuracy of image segmentation of small targets and edge parts. Finally, test on Massachusetts Buildings Dataset and WHU Dataset the experimental results show that compared with the original network the ACC, mIoU and F1 value are improved, and the imposed network shows good robustness and portability in different datasets.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.84-88
• /
• 1999

Recently, the necessity of accessing spatial data from remote computer via network has been increased as distributed spatial data have been increased due to their size and cost. Many methods have been used in recent years for transferring spatial data, such as socket, CORBA, HTTP, RPC, FTP, etc. In this paper, we propose spatial clearinghouse components to access distributed spatial data sources via CORBA and Internet. The spatial clearinghouse components are defined as OLE/COM components that enable users to access spatial data that meet their requests from remote computer. For reusability, we design the spatial clearinghouse with UML and implement it as a set of components. In order to enhance interoperability among different platforms in distributed computing environment, we adopt international standards and open architecture such as CORBA, HTTB, and OpenGIS Simple Features Specifications. There are two kinds of spatial clearinghouse: CORBA-based spatial clearinghouse and Internet-based spatial clearinghouse. The CORBA-based spatial clearinghouse supports COM-CORBA bridge to access spatial data from remote data providers that satisfy the OpenGIS Simple Features Specification for OLE/COM using COM and CORBA interfaces. The Internet-based spatial clearinghouse provides Web-service components to access spatial data from remote data providers using Web-browser.