• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.194-198
• /
• 2015

In this paper, a remote emergency stop system to improve the safety of an automated driving vehicle is proposed. One of the most serious problems of the previous wireless remote emergency system is that it does not work when the wireless channel is damaged in case of an emergency because it is composed of a single communication channel. Therefore, the proposed remote emergency stop system composed of a portable wireless remote system and a stationary wireless remote system is designed and the remote emergency stop system for automated driving vehicles is developed. By applying it to an automated driving vehicle to check it's performance, the wireless remote system is tested. Emergency stops using the portable wireless remote system is tested when the stationary wireless remote system is disconnected. Also, emergency stops using the stationary wireless remote system are tested when the portable wireless remote system is disconnected. The results of the emergency stop test show a satisfactory performance.

• 한국지능시스템학회논문지
• /
• 제24권5호
• /
• pp.489-494
• /
• 2014

본 논문에서는 무인차량용 다중채널 무선원격 제어시스템의 설계방안을 제안한다. 기존의 무선원격 제어시스템은 단일 제어채널로 구성되어 제어채널에 고장이 발생하였을 때 응급대처가 불가능한 문제점이 있다. 따라서 휴대용 무선원격 제어기와 스테이션용 무선원격 제어로 구성되는 다중채널 무선원격시스템을 제안한다. 무인차량용 다중채널 무선원격 제어시스템을 개발하기 위하여 휴대용 무선원격 제어기와 휴대용 무선원격 제어기를 설계 및 개발하였다. 개발한 무선원격 제어시스템의 성능을 확인하기 위하여 무인차량에 적용하여 주행 실험을 실시하였다. 무선원격제어기의 고장 시 휴대용 무선원격제어기를 이용한 비상정지 실험과 휴대용 무선원격제어기의 고장 시 스테이션용 원격제어시스템을 이용한 비상정지 실험을 실시한 결과 모두 만족하는 비상정지 성능을 발휘함을 검증하였다.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.14-19
• /
• 2011

Conveyors cause a high serious and fatal injuries in the industry. Every year people are hurt or killed as a result of accidents on conveyors. Most accidents occur during operation and maintenance when employees are working on moving, unguarded conveyors or when the conveyors starts unexpectedly. In 2008 there were 486 reported injures ranging from fatalities to injures. Of these 486 reported accidents, 8 were fatalities, 66.9%(325) of reported accidents occurred in manufacturing company and 43.8%(213) occurred at the belt conveyors. The objective of this study was to invent the remote emergency stop device because industrial accidents mainly occur at blind spots where usually do not have any safety guard or device rather than the normal working places. In principle, this new device will use with the existing safety system. Then, it will be powerful safety system for preventing injuries related with conveyors.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.22-29
• /
• 1993

A remote control system was developed in order to operate by push-buttons the conventional drum and chute components, which have been operated manually, in a concrete mixer-truck. As actuators, a hydraulic power unit was used for chute operations: two DC motors for drum operations. The devised drum controller consisted of three electric circuits : an analog proportional-integral control circuit, a drum acceleration circuit, and an emergency stop circuit. The remote control system was installed to be tested experimentally and then was evaluated to work successfully with a desirable accuracy.

• 전기학회논문지
• /
• 제56권7호
• /
• pp.1302-1308
• /
• 2007

In this paper, a real-time collision avoidance algorithm is proposed for experimental Autonomous Vehicle(XAV). To ensure real-time implementation, a virtual potential field is calculated in one dimensional space. The attractive force is generated by the steering command either transmitted in the remote control station or calculated in the Autonomous Navigation System(ANS) of the XAV. The repulsive force is generated by obstacle information obtained from Laser Range Finder(LRF) mounted on the XAV. Using these attractive and repulsive forces, modified steering, velocity and emergency stop commands are created to avoid obstacles and follow a planned path. The suggested algorithm is inserted as one component in the XAV system. Through various real experiments and technical demonstration using the XAV, the usefulness and practicality of the proposed algorithm are verified.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.168-178
• /
• 2002

The CNC machine toots has two kinds of fault. One is the fault due to degraded parts and the other is the fault due to operation disability. The phenomena of degradation is predictable but the operational fault is unpredictable because it occurred without any warning. The major faults of CNC machine tool are operational faults which are charged over 70%. This paper describes the model of remote service and the intelligent fault diagnosis system to diagnosis operational faults of CNC machine tools. To generalize fault diagnosis, two diagnosis models such as SF(Switching Function) and SSF(Step Switching Function) are proposed. The SF is static model and SSF is dynamic model for expression of fault. The SF and SSF model can be generated using SFG(Switching Function Generator) which is developed in this research. The three major operational faults such as emergency stop error, cycle start disability and machine ready disability are applied to experiment of fault modeling. To remote service of faults fur CNC machine tool, the web server and client system based internet are proposed as the suitable environment. The developed two technologies are implemented with the internal function of open architecture controller. The implemental results for two technologies are presented to validate the proposed scheme.