• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.205-212
• /
• 2013

In recent, the demand of Unmanned Aerial Vehicles (UAVs) that can autonomous navigation and remote control has been increased in military, civil and commercial field. Particularly, existing researches focused on autonomous navigation method based on vanish point and remote control method based on event processing in indoor environments. However, the existing methods have some problems. For instance, a detected vanish point in intersection point has too much detection errors. In addition, the delay is increased in existing remote control system for processing images in real time. Thus, we propose improved vanish point algorithm by removing detection errors in intersection point. We also develop a remote control system with android platform by separating flying control and image process. Finally, we compare the proposed methods with existing methods to show the improvement of our approaches.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.61-64
• /
• 1999

In this paper, a technique to expand the Input and Output (I/O) of the programmable logic controller (PLC) using remote I/O module is presented. The controller and the remote I/O module should have the same protocol and are interfaced through RS 485. Each remote I/O module consists of 16 digital input and 16 digital output, and the maximum of 32 remote I/O module can be linked to one controller. The remote I/O is programmed for interrupt request to controller independently. Therefore, there is no affect to the scan time of the controller. Using this technique, the PLC can be efficiently applied to the several hundred meters different control points such as the ON-OFF control fur the agriculture farm, the building automation system, a multi group of machine control.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.613-620
• /
• 2013

A new remote control algorithm for a mobile robot is proposed, where a remote controller consists of a camera and inertial sensors. Initially the relative position and orientation of a robot is estimated by capturing four circle landmarks on the plate of the robot. When the remote controller moves to point to the destination, the camera pointing trajectory is estimated using an inertial navigation algorithm. The destination is transmitted wirelessly to the robot and then the robot is controlled to move to the destination. A quick movement of the remote controller is possible since the destination is estimated using inertial sensors. Also unlike the vision only control, the robot can be out of camera's range of view.

• 제어로봇시스템학회논문지
• /
• 제7권3호
• /
• pp.255-262
• /
• 2001

According to the advancement of web related technologies, many works on robots using these technologies, called web-based robots enables sharing of expensive equipments as well as control of remote robots. But none of the existing methods about web-based robots in-clude robot simulators in their web browser, which transfer appropriate information of a remote place to the local users. In this paper, a web-based robot simulator is proposed and developed to control a remote robot by using the web. The proposed simulator can transfer the 3D information about the remote robot to the local users by using 3D graphics, which has not been previously developed. Also, it sends the camera image of a remote place to the local users so that the users can use this camera image as well as 3D information in order to control the remote robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2215-2217
• /
• 1998

A remote maintenance system, which enables an engineer to check and treat machines installed at remote site with the help of data communication, has been developed. The maintenance of machines with the traveling of engineers is much costly in time and economically. With the developed system, the engineer at the remote site can diagnose malfunctioning machines. The remote maintenance system is composed of video conferencing system, camera control system and signal aquisition system. The developed system has been tested on the 100Mbps ATM network to evaluate its ability to diagnose remote machines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1315-1317
• /
• 2000

In this paper, a solution of remote manager system for power plant was introduced. In conventional remote control system computer or adapter are need to communicate with manager computer. As the number of managed power installations increases, the remote management system is going to be complicated and expensive. To solve the problem, a Multi-functional Board for power plant is developed. The Multi-functional Board has a both function of remote management and communication in LAN. This system will be hope to decrease the cost of remote management.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.484-489
• /
• 2002

This paper concerns the design and implementation of a Bandwidth Variable Digital Chirp Generator (DCG) for the radar altimeter. A double SRAM parallel structure is used to breakthrough the upper DCG bandwidth limited by the highest clock frequency of the digital chips. An experimental system working in the waveform storage method has been implemented. We show that the bandwidth changed according to the radar altimeter's requirement and the design released the stringent speed requirement of the chips fur making a variable wide bandwidth DCG.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1171-1173
• /
• 2003

There are two datasets to estimate the area-mean and time-mean precipitation rate. For one, an array of surface rain gauges represents a series of rods that have to the time axis of the volume. And another data is that of a remote sensing make periodic overpasses at a fixed interval such as radar. The problem of optimally combining data from surface rain gauge data and remote sensed data is considered. In order to combining remote sensed data with Automatic Weather Station (AWS), we use optimal weighting method, which is similar to the method of [2]. They had suggested optimal weights that minimized value of the mean square error. In this paper, optimal weight is evaluated for the cases such as Changma, summer Monsoon, Typhoon and orographic rain.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.978-980
• /
• 2003

This study explores the temporal and spatial features near 67years (1934 ?2001) and landcover change in last 14 years (1987-2001) in Shijiazhuang, China, based on 67-year time series data edited from historical maps, TM and ETM+ imageries by integrating GIS and remote sensing method. An index named Annual Growth Rate (AGR) is used to analyze the spatial features of urban sprawl, and Maximum Likelihood classification method is utilized to detect the land cover types change. At last, the relationship between urbanization and factors is analyzed.