• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.607-622
• /
• 2004

Recently epidemiologic studies have indicated that the patients with periodontitis may have increased risk of ischemic cardiovascular events, and have suggested the important roles of blood cytokines and acute reactant proteins in the systemic infection and inflammatory response. Periodontitis and coronary heart disease (CHD) may share the common risk factors and the genetic mechanism associated with interleukin(IL)-1A, B and RA genotype may be involved in the production of IL-1. This study was aimed to investigate the relationship between angiographically defined CHD and periodontitis as chronic Gram-negative bacterial infection and to determine whether the IL-1 gene polymorphism is associated in both diseases. Patients under the age of 60 who had undergone diagnostic coronary angiography were enrolled in this study. Subjects were classified as positive CHD (+CHD, n=37) with coronary artery stenosis more than 50% in at least one of major epicardial arteries, and negative CHD (-CHD, n=30) without significant stenosis. After recording the number of missing teeth, periodontal disease severity was measured by means of plaque index (PI), gingival index (GI), bleeding on probing (BOP), probing depth (PD), clinical attachment level (CAL), and radiographic bone loss around all remaining teeth. Gingival crevicular fluid (GCF) was collected from the 4 deepest periodontal pockets and assessed for cytokine ($IL-1{\beta}$, IL-6, IL-1ra, tumor necrosis $factor-{\alpha}$, and prostaglandin $E_2$). Additionally, blood CHD markers, lipid profile, and blood cytokines were analyzed. IL-1 gene cluster genotyping was performed by polymerase chain reaction and enzyme restriction using genomic DNA from buccal swab, and allele 2 frequencies of IL-1A(+4845), IL-1B(+3954), IL-B(-511), and IL-1RA(intron 2) were compared between groups. Even though there was no significant difference in the periodontal parameters between 2 groups, GCF level of $PGE_2$ was significantly higher in the +CHD group(p<0.05). Correlation analysis showed the positive relationship among PD, CAL and coronary artery stenosis(%) and blood $PGE_2$. There was also significant positive relationship between the periodontal parameters (PI, PD, CAL) and the blood CHD markers (leukocyte count, C-reactive protein, and lactic dehyrogenase). IL-1 gene genotyping showed that IL-1A(+3954) allele 2 frequency was significantly higher in the +CHD group compared with the -CHD group (15% vs. 3.3%, OR 5.118,p=0.043). These results suggested that periodontal inflammation is related to systemic blood cytokine and CHD markers, and contributes to cardiovascular disease via systemic inflammatory reaction. IL-1 gene polymorphism might have an influence on periodontal and coronary heart diseases in Korean patients.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.197-212
• /
• 1998

The purpose of this study was to evaluate the effects of fluoride application on the aspect of shear bond strength of three aesthetic restorative materials to dentin. One light-cured composite resin(Palfique Esterite) and two light-cured glass ionomer cements(Fuji II LC and Compoglass)were used in this study. 120 permanent molars were used for this study. The teeth were extracted due to the origin of periodontal disease. The crowns of all teeth were removed, and the remaining roots were embedded in epoxy resin. The mesial or distal surfaces of roots were ground flat to expose dentin and polished on wet 320-, 400-, and 600 grit SIC papers for a total of 120 prepared flat root dentin surfaces. The prepared samples were divided into six groups. Group 1, 3, and 5 were control groups and group 2, 4, and 6 were experimental groups. Sixty samples for experimental groups were treated with 2% NaF solution for 5 minutes. Group 1 and 2 were bonded with Plafique Esterite, group 3 and 4 were bonded with Fuji II LC, and group 5 and 6 were bonded with Compoglass. After 24 hours water storage at $37{\pm}1^{\circ}C$, all samples were subjected to a shear to fracture with Instron universal testing machine(No.4467) at 1.0 mm/min displacement rate. Dentin surfaces treated with each conditioners before bonding and interfacial layers between dentin and aesthetic restorative materials were observed under Scanning Electron Microscope(Hitachi S-2300) at 20Kvp. The data were evaluated statistically at the 95% confidence level with ANOVA test. The result were as follows; 1. Among the control groups, group 1 showed strongest bond strength and group 3 showed weakest. 2. Among the experimental groups, group 2 showed strongest bond strength and group 6 showed weakest. 3. Statistical analysis of the data showed that pretreatment of dentin with 2% NaF solution significantly decreased the bond strength of three aesthetic restorative materials to dentin(P<0.05). 4. SEM findings of fluoride treated dentin surfaces (2, 4, 6 group) demonstrated dentin surfaces covered with fluoridated reaction products. 5. Except group 4 and 6, resin tags were formed in all groups.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.374-381
• /
• 2019

A conventional approach for the treatment of long-span edentulous areas is the use of removable dentures. However, placing implants in these areas results in superior functional outcomes by increasing the stability, support, and resistance of the prostheses and improving the masticatory efficiency. Treatment modalities utilizing implants can be further classified into either removable or fixed-type prostheses. Several factors such as the amount of alveolar bone resorption, inter-arch relationship, patient preferences, and socioeconomic status should be considered when determining the appropriate treatment approach. Monolithic zirconia has been considered a suitable material for implant-supported fixed dental prosthesis, because of the drastic improvement in its mechanical properties. It exhibits fewer incidences of fracture and chipping of the prostheses, and has greater bulk of material than metal-ceramic crowns and zirconia-veneered ceramics. Moreover, highly translucent monolithic zirconia is also available in the market, and its application is gradually increasing for anterior tooth rehabilitation. The present report describes a patient who underwent full-mouth rehabilitation with fixed dental prostheses (eight upper and three lower implant placements). All teeth, except bilateral mandibular canines and left mandibular first and second premolars, were extracted after the diagnosis of generalized chronic moderate-to-advanced periodontitis of the remaining teeth. The patient reported satisfactory esthetic and functional outcomes during the one-year follow-up visit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.515-522
• /
• 2021

Successful cases of the implant-assisted removable partial denture and implant overdentures are reported in which a few implants are additionally placed to secure the maintenance, support, and stability of the denture when there are a few residual teeth. When the lateral force applied to the tooth abutment and implant surveyed crown is minimized, the horizontal and rotational movement of the denture is significantly reduced which is an effective method that can improve the address in patients who complain of reduced retention and stability of their dentures. In this case, a small number of implants were placed to fabricate an implant-assisted removable partial denture with implant surveyed crown in the maxilla and implant overdenture with Locator^® attachment in the mandible to improve the retention, stability, and support of the dentures. The patient was satisfied with both functional and aesthetic aspects after the final dentures were delivered.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.308-315
• /
• 2023

In the case of a patients who have lost the centric stop and have a staggered occlusion of the residual teeth, various movements occur when the denture is loaded. Implant placement is necessary to reinforce the retention, support, and stabilization elements to reduce denture movement. However, in this case, considering the patient's age, aversion to surgery, and bone loss, implants were not placed and restoration was performed with a removable partial denture. In this case, it is important to set the correct mandibular position for restoration because the patient has a habit of chewing with the remaining teeth. In this case, a stable mandibular position was established using a gothic arch tracing, and good results were obtained by restoring with partial dentures, so this is reported.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.164-173
• /
• 2005

Mechanical preparation has been introduced to provide the sealant retention. The objective of this study was to compare the fissure penetration and the microleakage of pit and fissure sealant using mechanical preparation(mechanical preparation + acid etching) and acid etching only. An additional objective of this study was to compare the fissure penetration and the microleakage of unfilled and filled sealant in both methods. Sixty human premolars extracted for orthodontic purpose were selected. Thirty teeth were acid etched alone and remaining thirty teeth were prepared with a $\frac{1}{4}$ round bur and then acid etched. One-half of teeth in each surface treatment method were sealed with unfilled sealant and the other half were sealed with filled sealant. All of the teeth were thermocycled for 1200 cycles at $5^{\circ}C\;and\;55^{\circ}C$ and immersed in 5% methylene blue for 24 hours. Each tooth was sectioned bucco-lingually at mesial pit and distal pit and examined under a Measurescope. In the case of mechanical preparation, fissure penetration of sealant was significantly increased compared with the case of acid etching only(P < 0.05). The filled and unfilled sealant using mechanical preparation showed significantly decreased microleakage when compared with the unfilled sealant using acid etching only(P < 0.05). No differences were found in fissure penetration and microleakage between unfilled and filled sealant in both methods. Taken together, the results of this study suggest that mechanical preparation and filled sealant are recommended when placing pit and fissure sealant. However, further clinical studies should be performed in regard to microleakage.

• Journal of Korean Dental Science
• /
• v.2 no.1
• /
• pp.31-38
• /
• 2009

With today's social and cultural personal interactions, greater leisure time and participation in sports activities, and growing traffic volume, the risk of physical trauma has increased markedly. This is a clinical and retrospective study of patients exposed to oral and maxillofacial trauma. We clinically observed 72 patients with trauma in the Department of Oral and Maxillofacial Surgery, Kyunghee University Dental Hospital, from June 2006 through November 2007. The following data was obtained: 1. The male:female ratio of patients having experienced physical trauma was 6.2:1, with most patients in their twenties. 2. Traffic accident (37.5%) was the most common cause of trauma. 3. The highest incidence of fracture occurred to the zygomatic arch(22.1%) among mid-facial fractures and angle(37.5%), symphysis(35.4%) in mandible fractures. 4. Open reduction (88.9%) was the most frequently used form of treatment. Closed reduction was performed on the remaining 11.1% of cases. 5. Teeth and alveolar bone damage occurred in 23.6% of all cases. 6. Other injuries that were related to mid-face fracture occurred in 27.8% of all cases. 7. Post-operative complications occurred in 31.9% of cases, and the highest complication was the nerve injury.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.208-219
• /
• 2001

To study the effect of dentin permeability on a tooth with wear from tooth brushing after application of desensitizing agent, extracted teeth free from caries were chosen. Coronal dentin discs with thickness of 1mm were prepared. Using the split chamber device developed by Pashely, hydraulic conductance, scanning electron microscope images(SEM) and atomic force microscope images(AFM) were compared and contrasted before and immediately after the application of desensitizing agent and after equivalent tooth brushing of 1 week, 2 weeks, and 6 weeks. Four commercially available desensitizing agents were used in this study ; they were Gluma, Seal & Protect, All-Bond 2 and MS Coat. The results of this study are as follows. 1. On all specimens, the hydraulic conductance decreased after the application of tooth desensitizing agent. 2. Except the specimens treated with MS Coat, the remaining specimens had an increase in dentin permeability after tooth brushing for 1 and 2 weeks but a decrease after 6 weeks. 3. The specimens treated with MS Coat had statistically significant increase in the dentin permeability regardless with the duration of tooth brushing. 4. On examination of SEM and AFM, the dentinal tubule diameter had decreased after treatment of desensitizing agents. The specimens other than those treated with MS Coat, smear layers were noted after tooth brushing. It is not always consistant but the hydraulic conductance correlated with the images from SEM and AFM.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.254-266
• /
• 1996

The purpose of this study was to evaluate the degree of marginal leakage that is made by wet bonding to dentin and dissolution of dentinal collagen layer in vivo and in vitro. Class V cavities were prepared to 32 cat's canine teeth and they were randomly assigned into the following 4 groups : Group 1 (not acid conditioned) ; Group 2 (acid-conditioned and blot-dried) ; Group 3 (acid-conditioned and air-dried for 30 seconds) ; Group 4 (acid-conditioned and retreated with 10% NaOCl solution). The acetone-based primer and bonding agent of All Bond 2(Bisco Inc., U.S.A.) and composite resin(Z-100, 3M. Dent. Prod., U.S.A.) were then applied. The resin collar and cap attached to each specimen and 50% silver nitrate solution was placed inside the resin cap for 3 hours. After the canine tooth was resected in level of cervical third, specimens were highly polished and observed the degree of the dye penetration on incisal and gingival margins. The results were as follows ; 1. There was no significant difference of marginal leakage in all the groups between in vivo and in vitro. 2. In vivo, the degree of leakage on the gingival margin showed the lowerest in group 4 and followed by group 2, 3 and group 1 with ascending order. However, there was no statistical difference among all the groups(p>0.05). 3. In vitro, the degree of leakage on the gingival margin showed the lowerest in group 2 and followed by group 4, 3 and group 1 with ascending order. However, there was no significant difference among the experimental groups(p>0.05). 4. The marginal leakage of the incisal margin in vitro was significantly higher in group 1 than the remaining groups(p<0.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.356-362
• /
• 2020

All the faculties at the prosthodontic department in Kyung Hee University Dental Hospital at Gangdong, have been implementing the Top-Down concept of treatment approach since 2006 in which the outcomes of the last prosthetic treatment are predicted in advance during the treatment planning stage of patients with dental tissue defects. Based on the Top-Down concept, this report is also an example of how the final prosthetic treatment was performed in advance before going into implant surgery for the missing teeth. Among the various methods of connecting implant fixture and restoration, the cement-retained method is relatively simple to manufacture restoration without being constrained by the angle of the implants placed, but difficult to remove remaining subgingival excess cement completely, and to detach it being when necessary. In the report, SB-locking method will be introduced which enables an aesthetic implant restoration without either a screw hole or residual excess cement.