• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.186-189
• /
• 2005

Since human listening is very sensitive to sound, a subjective index of a sound quality is required. Therefore, in the analysis for each situation, the sound evaluation is composed with sound quality factor. Many researchers spends their effort to make a more reliable and more accurate of sound in term of sound quality index for various system noise. In this study a reliable index is constructed and analyzed using correlation analysis, regression analysis and weighting factor for each sound quality factor. We have made the sound quality index that agrees with more than human subjective sensitivity which apply to various sound quality metrics. Also we applied a 'grade' metric to jury for sound evaluation, analyzed relation between sound duality index and sound quality grade. Then we will judge the sound quality level according to the sound quality grade scheme.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.27-35
• /
• 2016

Objective: The aims of our study were to verify the validity of the T-Scan III system (Tekscan) as an objective occlusal evaluation tool, and to assess the differences between two occlusal indexes - the peer assessment rating (PAR) index and the American Board of Orthodontics objective grading system (OGS) - by comparing the scores derived from the T-Scan III system with the two occlusal indexes and analyzing the correlations between them. Methods: The final study sample included 48 adult volunteers (39 men and 9 women, mean age $24.14{\pm}3.16years$), after excluding 29 volunteers whose occlusion could not be evaluated by the T-Scan III system due to severe skeletal or occlusal problems. PAR index and OGS scores were assessed using dental study models, and measurements of centric occlusion, protrusive movement, and lateral excursion movement were obtained via the T-Scan III system. The results were analyzed to determine correlations. Results: Occlusal analysis by the T-Scan III system was clinically reliable (p < 0.05), and the PAR index and OGS scores were significantly correlated with several measurements obtained with the T-Scan III system (p < 0.05). Conclusions: The T-Scan III system is a quantitative and reliable method for occlusal evaluation, and represents a potential substitute for occlusal indexes. Compared to the PAR index, the OGS scores of more variables were significantly correlated with the T-Scan measurements.

• Earthquakes and Structures
• /
• v.9 no.1
• /
• pp.145-171
• /
• 2015

Due to earthquakes, many structures suffered extensive damages that were attributed to the torsional effect caused by mass, stiffness or strength eccentricity. Due to this type of asymmetry torsional moments are generated that are imposed by means of additional shear forces developed at the vertical resisting structural elements of the buildings. Although the torsional effect on the response of reinforced concrete buildings was the subject of extensive research over the last decades, a quantitative index measuring the amplification of the shear forces developed at the vertical resisting elements due to lateral-torsional coupling valid for both elastic and elastoplastic response states is still missing. In this study a reliable index capable of assessing the torsional effect is proposed. The performance of the proposed index is evaluated and its correlation with structural response quantities like displacements, interstorey drift, base torque, shear forces and upper diaphragm's rotation is presented. Torsionally stiff, mass eccentric single-story and multistory structures, subjected to bidirectional excitation, are considered and nonlinear dynamic analyses are performed using natural records selected for three hazard levels. It was found that the proposed index provides reliable prediction of the magnitude of torsional effect for all test examples considered.

• The Research Journal of the Costume Culture
• /
• v.18 no.1
• /
• pp.93-108
• /
• 2010

R$\ddot{o}$hrer index, Vervaeck index and Body Mass Index(BMI) are frequently used in order to judge obese subjects in clothing & textiles field. However, there are no certain criteria of judging the degree of obesity. Each researcher utilized these obesity indices according to their own criteria so far. Therefore, the purpose of the study is to suggest a reliable obesity index and new criteria for judging the degree of obesity. The results are as follows; Utilizing frequency analysis, main percentiles, minimums, maximums and ranges were presented by 5 age groups from twenties to sixties. Obesity rates dramatically increased, the subject got older. Especially, obesity rate of the subjects in their fifties and sixties were much higher than other age groups. 1.6 & higher can be used in the R$\ddot{o}$hrer index, 98 & higher can be used in the Vervaeck index, and 25 & higher can be used in the BMI as the Optimal criteria of the obesity. Total of 24 body measurements and 3 obesity indices were used for analyzing the correlation analysis. All heights measurements showed negative correlation with the 3 obesity indices. It is determined heights measurements have high correlation with R$\ddot{o}$hrer index compare to other indices. Crotch height, interscye back, neck shoulder point to breast point, bust circumference, waist circumference, upper arm circumference and armscye circumference have high positive correlation with all obesity indices. According to the ANOVAs by each percentile group of the R$\ddot{o}$hrer and Vervaeck indices, there are big significances in all measurements and obesity indices except arm length. In general, heights decreased significantly by getting bigger, while circumferences and lengths, widths and indices increased rapidly by getting bigger. The results of the analysis by each percentile group in the BMI, it showed the significant differences in the all measurements except cervical height and arm length. There were similar tendency of differences according to the degree of the obesity in BMI percentile groups. It was confirmed that the BMI is the most reliable index for judging the obesity owing to the high correlations and significant differences with other measurements.

• Smart Structures and Systems
• /
• v.16 no.2
• /
• pp.367-382
• /
• 2015

This paper aims to conduct the reliability-based assessment of the welded joint in the orthotropic steel bridge deck by use of a mesh-insensitive structural stress (MISS) method, which is an effective numerical procedure to determine the reliable stress distribution adjacent to the weld toe. Both the solid element model and the shell element model are first established to investigate the sensitivity of the element size and the element type in calculating the structural stress under different loading scenarios. In order to achieve realistic condition assessment of the welded joint, the probabilistic approach based on the structural reliability theory is adopted to derive the reliability index and the failure probability by taking into account the uncertainties inherent in the material properties and load conditions. The limit state function is formulated in terms of the structural resistance of the material and the load effect which is described by the structural stress obtained by the MISS method. The reliability index is computed by use of the first-order reliability method (FORM), and compared with a target reliability index to facilitate the safety assessment. The results achieved from this study reveal that the calculation of the structural stress using the MISS method is insensitive to the element size and the element type, and the obtained structural stress results serve as a reliable basis for structural reliability analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1069-1072
• /
• 2009

Field sequential display has some advantages but color breakup (CBU) is the significant problem. Many researches had introduced several methods to reduce CBU phenomenon, however there are no reliable methods to measure the degree of CBU. In this report, a novel CBU measurement technique which was based on the image processing method and subjective analysis results had proposed to evaluate the degree of CBU. Color Breakup Index (CBI) was presented to be a useful index to recognize the CBU phenomenon in the different field sequential technique displays.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.114-119
• /
• 2011

Process capability indices (PCls) have been widely used in manufacturing industries to provide a quantitative measure of process potential and performance. The previous studies have measured only one location on each part in the case of single variate. To calculate the reliable process capability, a couple of measuring locations on each part are required. In this paper, we propose a new system process capability index $SC_{pm}$ (m) which is the minimum value of the location PCls.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.114-122
• /
• 1996

The aim of this study was to assess the precision of the estimates of the time of estrous cycle, optimal breeding and ovulation derived by vaginal cytology. The thirteen Korea Jin-do dogs were examined the vaginal cytology, plasma estradiol-17$$\beta $ and progesterone assay during the estrous cycle. Day 0 was the day of the first male acceptance. The main change of vaginal cytology during the estrous cycle was the high proportion of anuclear cell and erythrocyte in proestrus, superficial cell, anuclear cell and erythrocyte in estrus, parabasal cell, large intermediate cell and leukocytes in diestrus, and parabasal cell and small intermediate cell in anestrus, respectively. These data indicated that vaginal cytology was reliable method for estimating estrous cycle in Korea Jin-do dogs. In the cell indices during estrus the maximum eosinoghilic index was $92.0{\pm}$2.6 (Mean{\pm} SEM$)% at Day 2 and the maximum cornification indez was $96.0{\pm}1.3%$ at Day 2, respectively. The eosinothilic indez and cornification indez of up to 70% were found at Day -1 to Day 5 and Day -6 to Day 8, and up to 80% at Day 1 to Day 4 and Day -4 to Day 6, respectively. From these data it was presumed that eosinophilic index was more reliable index for monitoring optimal breeding time than cornification indexm because eosinophilic index peak period was shorter than cornification indeX peak period and Day 2 was the day of ovulation. Therefore, optimal breeding time was the eosinophilic index peak period, more than 80% of eosinoghilic index. The $estradiol-17{\beta}$ peak, with 3 days delayed when progesterone concentration was $4.5{\pm}0.5 ng/ml$. These data estimated that the ovulation time was the day of eosinophilic index peak, Day 2. breeding time and pvulation time in Korea Jin-do dogs.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.82-84
• /
• 2016

We propose a new reliable SVD-based watermarking scheme having high fidelity and strong robustness with no false-positive problem. Each column of the principal component of a watermark image is embedded into singular values of LL, LH, HL and HH sub-bands of cover image with different scale factors. Each scale factor is optimized by trading-off fidelity and robustness using Differential Evolution (DE) algorithm. The proposed scheme improves fidelity and robustness of existing reliable SVD based watermarking schemes without any false-positive problem. Index Terms - watermarking, reliable SVD, DWT, principal component, Differential Evolution.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.7
• /
• pp.11-17
• /
• 1982

In this paper, a reliable and convenient evaluation method for the adequacy of any radial distribution line's voltage drop is proposed for improvement of the voltage regulation of the distribution line under operation. Using the voltage measurement of the first load branch point and the last point on the given distribution line its average line voltage drop and the line voltage drop variance by pure load variation are computed. And by these values and allowable or required line drop from proper voltage regulation view point, present adequency index and operation improvement index of the line drop are newly introduced for the evaluation of the given distribution line's voltage regulation. As a result of application to the 4 cases of study, the proposed method is proved to be reliable and convenient.