• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.550-554
• /
• 1997

It is important to select a reliable electronic control system in power plants because a trip of a power plant caused by malfunction of the control system can lead to a great deal of economic and social loss. In this paper. environmental test specifications for evaluating the reliability of the electronic control system were developed in order to select a reliable one. Also, the electronic control systems made by domestic manufacturers were tested based on these developed environmental test specifications.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.919-921
• /
• 1996

Recently, a growing demands on electricity require a high performance and reliable operation in the area of protection, control and monitoring of power plants and substations which may not provides with conventional systems. This paper describes a novel IDPACS (Integrated Digital Protection And Control System) in which we integrate all protection, control and monitoring function of the substations. The simulation results show that the proposed system provides fast response and reliable operation of power plant with superb performance on protection and control system.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.745-754
• /
• 2007

In this paper, we present the Enhanced Communication Transport Protocol-Part 5 (ECTP-5), which provides scalable and reliable multicast communication service for many-to-many applications by constructing high quality recovery trees from two-layer logical trees and repairing the losses via unicast automatic repeat request-based error control. In order to realize the protocol, we developed feasible protocol architectures and building blocks including additional functions which deal with engineering details, such as membership dynamics and sender coordination. Experimental results show that ECTP-5 scales well with various session sizes and packet loss rates in terms of control overhead and recovery latency.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1059-1062
• /
• 1998

This paper which can simulate FRIENDS(Flexible Reliable Intelligent Electrical eNergy Delivery System) model of distribution electrical system presents a new algorithm. In the operation of FRIENDS model, dispersed energy storage(DES) systems have an important role. We can use the active and reactive power of DES to control customer's voltage. In this, the former means load levelling operation and the later means voltage control operation of DES. We focus our research on load levelling operation of DES. We develope an algorithm to get an optimal capacity and operation schedule of DES and then apply it to the FRIENDS model. The results show the effectiveness of the proposed method.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.246-260
• /
• 2016

A major challenge achieving scalable access control for a large number of subscribers in a public broadcast is to distribute key update messages reliably to all stateless receivers. However, in a public broadcast, the rekeying messages can be dropped or compromised during transmission over an insecure broadcast channel, or transmitted to receivers while they were off-line. In this study, we propose a novel group key management scheme. It features a mechanism to allow legitimate receivers to recover the current group key, even if they lose key update messages for long-term sessions. The scheme uses short hint messages and member computation. Performance analysis shows that the proposed scheme has the advantages of scalability and efficient rekeying compared to previous reliable group key distribution schemes. The proposed key management scheme targets a conditional access system in a media broadcast in which there is no feedback channel from receivers to the broadcasting station.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1020-1025
• /
• 2007

EMS(energy management system) and SCADA(supervisory control and data acquisition) systems are used for reliable and efficient operation of electrical power systems. Various functions in EMS such as power flow, contingency analysis, security analysis essentially need accurate data set for reliable operation. State estimation can be a tool for providing these data. In this paper, programs for observability analysis and bad data processing are developed. Fundamental algorithms are introduced and validity of the proposed techniques is inspected with test cases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.880-888
• /
• 2001

This paper presents a fault detection asnd isolation algorithm for highly reliable gantry crane system. The algorithm is constructed by multiple PI observer technique, and the magnitude of actuator fault can be estimated by using integrated estimated output error. Also, the complex actuator and /or sensor fault can be detected and isolated by monitoring the integrated error and the estimated state error. Considering the actuator and/or the sensor fault, we verify that these fault can be detected and isolated through simulation. Lastly, we show a simple reliable control method by using the detected fault signal and an added observer.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.61-69
• /
• 2005

TCP and UDP is a transport layer protocol of Internet. TCP is a connection oriented protocol which supports a reliable data transfer by offering error and flow control, but it bring a transmission delay. On the other hand, the UDP is a connectionless protocol which does not carry out error and flow control, but it guarantees a realtime transmission. There are hardly any protocols which supports not only realtime functions but also data reliability. In this paper, we have designed and implemented a new TCP mode option which supports reliable realtime transmission. Our designed TCP performs an error recovery process during a fixed amount of time. This time is negotiated during the connection establishment phase. Our designed TCP is tested in real environments, and we find that it is relatively faster than the standard TCP and more reliable than the UDP. It can be used for the reliable transfer of realtime multimedia data.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.77-82
• /
• 2006

This study defined engineering mechanism and compensation method to establish reference pressure of smoke control zone with atmospheric pressure that is compensated for temperature. The reliable controller of integration smoke control was developed by establishing the specifications, algorithms and constructing engineering data. The development of controller for integration smoke control can cut down number of processes, manufacturing and installation cost by removing pressure measurement pipe established separately for non smoke control zone, and improve the accuracy of pressure differential by embedding pressure measurement ports for non smoke control zone. More correct and reliable pressure differentials can be obtained by the central control from controller of integration smoke control rather than the existent individual control. This will provide the basics and the flexibility to the integral smoke control system and accordingly improve the performance of disaster prevention.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.190-197
• /
• 2011

In industrial distributed control systems, sensors collect data from the physical environment periodically and transmit them to the actuators, which process the control operations based on the received data. For the effective operation of the control systems, the data transmitted by the sensors has to be delivered to the actuators reliably within the deadline, and if the message reception rate of the actuators becomes lower than a threshold, then the performance of the control systems drops greatly. This paper suggests a message routing protocol to transmit periodic messages reliably in a distributed control system based on wireless sensor networks. For reliable message transmission, the proposed protocol selects a routing path whose end-to-end message reception rate is the highest before transmitting data messages. The proposed protocol has the capability of maintaining a target message reception rate for each flow. To maintain the required target reception rate, each destination monitors the actual message reception rate periodically and transmits a feedback message to the source if it drops below the target reception rate. On receiving the feedback message, the source tries to find a new path which can satisfy the target rate. The performance of the proposed protocol has been evaluated using simulation and compared with other protocols in terms of the message reception rate, the message delay and delay jitter, and so on. The simulation results show that the proposed protocol has a higher message reception rate and comparable message delay and delay jitter to other protocols. The simulation results also show that the proposed protocol has an ability to adapt well to the dynamic network traffic change.