• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.2
• /
• pp.94-100
• /
• 2010

The reliable multicast MAC (Medium Access Control) protocol is needed to guarantee the recipients' nonerroneous reception of the multicast data frames, which can be transmitted by the AP (Access Point) in infrastructure mode IEEE 802.11 wireless LANs. Enhancing the BMMM (Batch Mode Multicast MAC) protocol, in the literature, the connectivity-based reliable multicast MAC protocol was proposed to reduce the RAK (Request for ACKnowledgement) frame transmissions and enhance the multicast MAC performance. However, the number of necessary RAK frame transmissions increases as the number of multicast recipients increases. To alleviate the problem of the larger number of RAK frame transmissions with the larger number of multicast recipients, we propose the clustering algorithm for partitioning the recipients into a small number of clusters, so that the recipients are connected each other within the same clusters. Numerical examples are presented to show the reliable multicast MAC performance improvement by the clustering algorithm.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.89-100
• /
• 2008

We consider the feature recombination technique in a multiband approach to speaker identification and verification. To overcome the ineffectiveness of conventional feature recombination in broadband noisy environments, we propose a new subband feature recombination which uses subband likelihoods and a subband reliable-feature selection technique with an adaptive noise model. In the decision step of speaker recognition, a few very low unreliable feature likelihood scores can cause a speaker recognition system to make an incorrect decision. To overcome this problem, reliable-feature selection adjusts the likelihood scores of an unreliable feature by comparison with those of an adaptive noise model, which is estimated by the maximum a posteriori adaptation technique using noise features directly obtained from noisy test speech. To evaluate the effectiveness of the proposed methods in noisy environments, we use the TIMIT database and the NTIMIT database, which is the corresponding telephone version of TIMIT database. The proposed subband feature recombination with subband reliable-feature selection achieves better performance than the conventional feature recombination system with reliable-feature selection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.916-919
• /
• 2003

Reliable multicast data transmission in a 1:N environment needs more sophisticated error control mechanism than that of in 1:1 environment due to ACK implosion and duplicated retransmission. Although there have been many related research on error control in reliable multicast, real implemented protocols are rare. As one of the reliable multicast transport protocols, ECTP is selected as an international standard reliable multicast protocol by ITU-T and ISO and implemented on RedHat 7.2 machine by us. In this paper, we evaluate the performance of the error control mechanism in the respect of throughput and generated control packet numbers with a real implementation code. From the results, it is concluded that the suitable values of error control parameters can be obtained from the local group size and network environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.3
• /
• pp.180-187
• /
• 2014

This paper introduces reliable multicast MAC protocol for cooperative unmanned vehicles. cooperative unmanned vehicles communicate with infrastructure and other unmanned vehicles in order to increase driving safety. They exchange information related to driving and thus it requires real-time and reliable multicast. However, the international vehicular communication standard, IEEE 802.11p WAVE, does not provide a reliable multicast scheme on the MAC layer. To address the problems of reliability, we propose a reliable multicast protocol called WiVCL, which avoids contention and collision. Our evaluation shows that the WiVCL achieves a high degree of reliability and real-time features.

• The Korean Journal of Nuclear Medicine
• /
• v.7 no.1
• /
• pp.15-29
• /
• 1973

To attain a simple and reliable method of evaluating the thyroid function the reliability of the clinical manifestation and the conventional thyroid function tests in diagnosing the hyperthyroidism was studied. The subjects included 184 patients with hyperthyroidism and 66 cases with euthyroidism, who were treated at the Thyroid Clinic, Seoul National University Hospital, from July 1971 through August 1972. The observed results were as follows: 1. In the cases of hyperthyroidism, 19% of the patients were male and 81% female; in the cases of euthyroidism, 7.6% of the patients were male and 92.4% female. The majority of the patients were in 2nd to 4th decades of their lives. 2. There were objective signs clearly manifested in hyperthyroidism which were rare or absent in the euthyroid state. These clinical signs included wide pulse pressure, tachycardia, systolic murmur, exophthalmos, tremor, and warm skin. In the hyperthyroid state 91.3% of the cases manifested two or more of the above signs, whereas in the euthyroid state no patients manifested any two of the above signs. 3. The most frequent complaints of the patients with thyroid disease were palpitation, weight loss, increased appetite, heat intolerance, perspiration, hunger feeling; nervousness, exertional dyspnea, etc. There was no clear difference in the incidence of the symptoms between hyperthyroidism and euthyroidism. 4. In the diagnosis of hyperthyroidism, the reliability of thyroid ?unction tests was as follows; $T_7$ was 92.4% reliable, $^{125}IT_3$ resin uptake rate 91.6% reliable, $^{131}I$ thyroid uptake rate in 24 hrs. 89.4% reliable, serum $T_4$ level 85.9% reliable and BMR 75.5% reliable. Therefore the careful observation of the clinical manifestation of the disease is a simple and reliable way of making a correct diagnosis of either hyperthyroidism or euthyroidism. 5. In hyperthyroidism there shows no correlationship between the results of the thyroid function test and clinical signs but a high BMR was associated with both tachycardia and systolic murmur.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1055-1059
• /
• 2006

In Wireless Sensor Networks(WSNs), a sensor node broadcasts the acquisited sensing data to neighboring other nodes and it makes serious data duplication problem that increases network traffic loads and data loss. This problem is concerned with the conflict condition for supporting both the reliability of data transfer and avoidance of network congestion. To solve the problem, a reliable congestion control protocol is necessary that considers critical factors affecting on data transfer reliability such as reliable data transmission, wireless loss, and congestion loss for supporting effective congestion control in WSNs. In his paper, we proposes a reliable congestion protocol, called HRCCP, based on hop-hop sequence number, and DSbACK by minimizing useless data transfers as an energy-saved congestion control method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.2
• /
• pp.271-287
• /
• 2013

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.574-592
• /
• 2016

Range-free localization algorithm computes a normal node's position by estimating the distance to anchors which know their actual position. In recent years, reliable anchor selection research has been gained a lot of attention because this approach improves localization accuracy by selecting the only subset of anchors called reliable anchor. The distance estimation accuracy and the geometric shape formed by anchors are the two important factors which need to be considered when selecting the reliable anchors. In this paper, we study the relationship between a relative position of three anchors and localization error. From this study, under ideal condition, which is with zero localization error, we find two conditions for anchor selection, thereby proposing a novel anchor selection algorithm that selects three anchors matched most closely to the two conditions, and the validities of the conditions are proved using two theorems. By further employing the conditions, we finally propose a novel range-free localization algorithm. Simulation results show that the proposed algorithm shows considerably improved performance as compared to other existing works.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.605-609
• /
• 2002

Reliable multicast data transmission in a 1:N environment needs more sophisticated error control mechanism than that of in 1:1 environment due to ACK implosion and duplicated retransmission. Although there have been many related research on error control in reliable multicast, real implemented protocols are rare. As one of the reliable multicast transport protocols, ECTP is selected as an international standard reliable multicast protocol by ITU-T and ISO and implemented on RedHat 7.2 machine by us. In this paper, we evaluate the performance of the error control mechanism in the respect of throughput and generated control packet numbers with a real implementation code. From the results, it is concluded that the suitable values of error control parameters can be obtained from the local group size and network environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.