• Journal of Applied Reliability
• /
• v.9 no.4
• /
• pp.319-329
• /
• 2009

The airbag module is an inflatable restraint system that inflates within 0.05 seconds automatically in a collision to protect the occupants. The airbag fabrics used in the module are required to have the good resilience and strength and also to have retained at least 80% of mechanical properties after using longer than 10 years. In this study, we develop an accelerated test method in order to predict the lifetimes of airbag. In this test, we select temperature and humidity as environmental stresses by analyzing the failure mechanisms of coated and uncoated nylon 66 fabrics. It is found that the degradation of airbag fabrics is effectively accelerated under the combined conditions of high temperature and humidity. Analyzing the results of the accelerated test, the lifetimes of airbag fabrics are predicted to be longer than 10 years.

• International Journal of Reliability and Applications
• /
• v.8 no.2
• /
• pp.175-182
• /
• 2007

In this note, some comments concerning the testing procedures for the problems of stochastic comparison, testing IFR and testing NBU ageing properties are presented showing that the tests proposed in Belzunce, Candel and Ruiz(1998) are cumbersome to calculate and do not have as good asymptotic Pittman efficacies as simpler others already in the literature. This is done via new presentations of the measures on which Belzunce et al. base their tests.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.1-10
• /
• 2011

As requirements of embedded system get complicated, the tool for analyzing the reliability of embedded software is being needed. A probabilistic modeling is used as the way of analyzing the reliability of a software and to apply it to embedded software controlling multiple devices. So, it is necessary to specialize that to embedded software. Also, existing reliability analyzers should measure the transition probability of each condition in different ways and doesn't consider reusing the model once used. In this paper, we suggest a reliability analyzer for embedded software using embedded software Markov chin model and a unit testing tool. Embedded software Markov chain model is model specializing Markov chain model which is used for analyzing reliability to an embedded software. And a unit testing tool has host-target structure which is appropriate to development environment of embedded software. This tool can analyze the reliability more easily than existing tool by automatically measuring the transition probability between units for analyzing reliability from the result of unit testing. It can also directly apply the test result updated by unit testing tool by representing software model as a XML oriented document and has the advantage that many developers can access easily using the web oriented interface and SVN store. In this paper, we show reliability analyzing of a example by so doing show usefulness of reliability analyzer.

• Communications for Statistical Applications and Methods
• /
• v.20 no.6
• /
• pp.467-474
• /
• 2013

It is common to measure multiple coverage metrics during software testing. Software reliability growth models and coverage growth functions have been applied to each coverage metric to evaluate software reliability; however, analysis results for the individual coverage metrics may conflict with each other. This paper proposes the virtual coverage metric of a normalized first principal component in order to avoid conflicting cases. The use of the virtual coverage metric causes a negligible loss of information.

• Journal of Applied Reliability
• /
• v.14 no.4
• /
• pp.243-247
• /
• 2014

The Spinal cage is the cage-shaped implantable medical device used to treat structural abnormalities caused by degenerative intervertebral disks. In order to secure enough space to provide the mechanical stability and the intervertebral fusion, after removing the intervertebral disc, the Spinal cage is transplanted between the intervertebral space. A hammer is used to push the spinal cage into a narrow space during the spinal cage transplant surgery. Due to the impact and pressure, damage occurs frequently on the spinal cage. In this study, a test model is constructed to measure the value of impulse generally applied on the Spinal cage. The figures of internal impulse before and after the improvement of the Spinal cage are then compared to suggest direction to improve the reliability of the spinal cage.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.560-562
• /
• 2004

$SF_6$ gas has been increasingly used as the insulating and arc-suppressing medium in switchgears which are used as the protection devices of power system. Nowadays, most of power companies adopted the $SF_6$ gas-type load break switch for increasing the reliability of distribution network by its superior durability against external environmental condition, in substitution for air-type and oil-type switches. But, it is important to establish the general estimation process for the testing and estimation for long-term reliability Accordingly, the national standard(RS C0031) was made for the reliability assessment of $SF_6$ gas load break switch and the testing facilities were also set in KERI(Korea Electrotechlology Research Institute). This paper presents the requirements of RS C0031 for reliability assessment of $SF_6$ gas load break switch and synopsis of the accelerated life testing facilities for $SF_6$ gas load break switch.

• Journal of Applied Reliability
• /
• v.7 no.4
• /
• pp.137-148
• /
• 2007

Rapid increase of embedded systems in electronic and mechanical control systems requires reliable and error-free embedded software. State-based testing methods like FSM are usually used to assure the reliability of embedded software. However, because of possibility of explosion of test cases, only partial test cases are considered in practical tests, which cannot guarantee that all the possible errors are investigated. This study proposes a test procedure based on failure mechanisms that may occur in embedded systems, which can not only assure that certain kinds of possible errors are detected but reduce the testing time. The proposed procedure is applied to vehicle air control system.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.136-142
• /
• 2017

Purpose: In this paper, we propose a test method for evaluating the life time of the inverter which is one of the main internal configuration systems in order to evaluate the life time of the power supply for the vehicle. Methods: The performance and failure criteria required for the development of the accelerated life test method were established and the Taguchi method was used to derive the stress factors affecting performance and reliability. Results: The major stress of the product degradation were considered to be high temperature. Conclusion: The acceleration factor was estimated through a two-level high temperature test and a test methods was designed to guarantee the accelerated life time of the inverter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.270-279
• /
• 2003

Parametric studies have been conducted into the variability of the factors affecting the ultrasonic testing applied to weldments. The influence of ultrasonic equipment, transducer parameters, test technique, job parameters, defect type and characteristics on reliability far defect detection and sizing was investigated by experimentation. The investigation was able to build up substantial bank of information on the reliability of manual ultrasonic method for testing weldments. The major findings of the study separate into two parts, one dealing with correlation between ultrasonic techniques, equipment and defect parameters and inspection performance effectiveness and other with human factors. Defect detection abilities are dependent on the training, experience and proficiency of the UT operators, the equipment used, the effectiveness of procedures and techniques.

• Journal of Korean Society for Quality Management
• /
• v.45 no.3
• /
• pp.447-462
• /
• 2017

Purpose: This study aims to develop distributable samples that can be used for proficiency testing to verify the ability of the testing laboratory to perform high temperature and low temperature tests. Method: In this study, the temperature-resistance characteristics of the NTC thermistor were used to develop samples. The homogeneity and stability of samples were examined according to the proficiency testing requirements. Results: Thirty samples with homogeneity and stability were developed and used for the proficiency testing. Thus, it was possible to distinguish between the test laboratories that showed satisfactory results and those that did not. Conclusion: It was the first time to develop samples that can be used for proficiency testing in high temperature and low temperature tests. and it was proved that the proficiency test program can be operated using the characteristics of NTC thermistor.