• Title/Summary/Keyword: reliability testing

Search Result 1,662, Processing Time 0.026 seconds

Resistance Model for Reliability Analysis of Existing Steel Girder Bridges (강거더 교량의 신뢰성해석을 위한 저항모델 개발)

  • Eom, Jun Sik
    • Journal of Applied Reliability
    • /
    • v.13 no.4
    • /
    • pp.241-252
    • /
    • 2013
  • Because of financial and safety concerns, there are needs for more accurate prediction of bridge behavior. Underestimation of the bridge load carrying capacity can have serious economic consequences, as deficient bridges must be repaired or rehabilitated. Therefore, the knowledge of the actual bridge behavior under live load may lead to a more realistic calculation of the load carrying capacity and eventually this may allow for more bridges to remain in service with or without minor repairs. The presented research is focused on the reliability evaluation of the actual load carrying capacity of existing bridges based on the field testing. Seventeen existing bridges were tested under truck load to confirm their adequacy of reliability. The actual response of existing bridge structures under live load is measured. Reliability analysis is performed on the selected representative bridges designed in accordance with AASHTO codes for bridge component (girder). Bridges are first evaluated based on the code specified values and design resistance. However, after the field testing program, it is possible to apply the experimental results into the bridge reliability evaluation procedures. Therefore, the actual response of bridge structures, including unintentional composite action, partial fixity of supports, and contribution of nonstructural members are considered in the bridge reliability evaluation. The girder distribution factors obtained from the tests are also applied in the reliability calculation. The results indicate that the reliability indices of selected bridges can be significantly increased by reducing uncertainties without sacrificing the safety of structures, by including the result of field measurement data into calculation.

Testing NBUCA Class of Life Distribution Using U-Test

  • Al-Nachawati, H.
    • International Journal of Reliability and Applications
    • /
    • v.8 no.2
    • /
    • pp.125-135
    • /
    • 2007
  • In this paper, testing exponentiality against new better than used in convex average and denote by (NBUCA), or its dual (NWUCA) is investigated through the U-test. The percentiles of these tests are tabulated for samples sizes n = 5(1)40. The power estimates of the test are simulated for some commonly used distributions in reliability. Pitman's asymptotic efficiency of the test is calculated and compared. Data of 40 patients suffering from blood cancer disease (Leukemia) is considered as a practical application of the proposed test in the medical sciences.

  • PDF

Estimation of Software Reliability with Multiple Errors (다중오류들을 갖는 소프트웨어 신뢰성의 추정)

  • Lee, In-Suk;Jung, Won-Tae;Jeong, Hye-Jeong
    • Journal of Korean Society for Quality Management
    • /
    • v.23 no.3
    • /
    • pp.57-68
    • /
    • 1995
  • In this paper, we consider possibility that the multiple errors occur in each testing stage. At present, software reliability modeling is considered as a part of software reliability quality assurance in software engineering. However they dealt with the software growth model for the single error debugging at each testing stage until now. Hence it is necessary to study software reliability with multiple errors debugging. Therefore we propose software reliability growth modeling and estimate the parameters in the proposed software reliability growth model for the multiple errors debugging at each testing stage.

  • PDF

A study of evaluation reliability growth for Korea-Automated Guideway Transit system (한국형경량전철시스템(K-AGT) 신뢰성 성장 평가에 관한 연구)

  • Han Seok-Youn;Lee Ahn-Ho;Ha Chen-Soo;Lee Ho-Yong
    • Journal of the Korean Society for Railway
    • /
    • v.8 no.6 s.31
    • /
    • pp.597-601
    • /
    • 2005
  • Korea Railroad Research Institute(KRRI) developed the Driverless Rubber Tired Korea-AGT(Model: K-AGT) from 1999 to 2004. We have finished the safety and performance tests of K-AGT. Data obtained from this testing can be used to evaluate the growth of reliability. The most widely used traditional growth tracking model is included as IEC International standard. With the tracking model all corrective actions are incorporated during test, called test-fix-test. In the test-fix-test strategy problem modes are found during testing and corrective actions for these problems are incorporated during testing. In this paper, we demonstrated reliability analysis using growth model of driverless rubber tired K-AGT system to prove reliability of development system. Therefore, we introduce the well-known NHPP model and analyze a reliability growth using ReliaSoft's RGA software.

A Coverage Function for Arbitrary Testing Profile and Its Performance

  • Park Joong-Yang;Fujiwara Takaji;Park Jae-Heung
    • International Journal of Reliability and Applications
    • /
    • v.6 no.2
    • /
    • pp.87-99
    • /
    • 2005
  • Coverage-based software reliability growth models (SRGMs) have been developed and successfully applied in practice. Performance of a coverage-based SRG M depends on the coverage function employed by the SRGM. When the coverage function represents the coverage growth behavior well irrespective of type of the testing profile the corresponding coverage-based SRGM is expected to be widely applicable. This paper first conducts a study of selecting the most representative coverage functions among the available coverage functions. Then their performances are empirically evaluated and compared. The result provides a foundation for developing widely applicable coverage-based SRGMs and monitoring the progress of a testing process.

  • PDF

On Testing Exponentiality Against HNRBUE Based on Goodness of Fit

  • Mahmoud, M.A.W.;Diab, L.S.
    • International Journal of Reliability and Applications
    • /
    • v.8 no.1
    • /
    • pp.27-39
    • /
    • 2007
  • Based on goodness of fit new testing procedures are derived for testing exponentiality against harmonic new renewal better than used in expectation (HNRBUE). For this aging properties, a nonparametric procedure (U-statistic) is proposed. The percentiles of this test statistic are tabulated for sample sizes n=5(1)30(10)50. The Pitman asymptotic efficiency (PAE) of the test is calculated and compared with, the (PAE) of the test for new renewal better than used (NRBU) class of life distribution [see Mahmoud et al (2003)]. The power of this test is also calculated for some commonly used life distributions in reliability. The right censored data case is also studied. Finally, real examples are given to elucidate the use of the proposed test statistic in the reliability analysis.

  • PDF

Reliability Assessment Standard Development of the Hydraulic Valves (유압밸브 신뢰성 평가 기준 개발)

  • 윤소남;황태영;김형의
    • Proceedings of the Korean Reliability Society Conference
    • /
    • 2001.06a
    • /
    • pp.99-104
    • /
    • 2001
  • In this study, selecting methods of the hydraulic valve and evaluation item for development of reliability testing standard are c]early defined. And, we developed reliability testing standard of the hydraulic valves which are as follows, - Hydraulic directional control valve, - Hydraulic on-off solenoid valve - Hydraulic PWM valve, - Hydraulic check valve, - Hydraulic relief valve, - Hydraulic reducing valve, - Hydraulic flow control valve

  • PDF

Experimental approach to evaluate software reliability in hardware-software integrated environment

  • Seo, Jeongil;Kang, Hyun Gook;Lee, Eun-Chan;Lee, Seung Jun
    • Nuclear Engineering and Technology
    • /
    • v.52 no.7
    • /
    • pp.1462-1470
    • /
    • 2020
  • Reliability in safety-critical systems and equipment is of vital importance, so the probabilistic safety assessment (PSA) has been widely used for many years in the nuclear industry to address reliability in a quantitative manner. As many nuclear power plants (NPPs) become digitalized, evaluating the reliability of safety-critical software has become an emerging issue. Due to a lack of available methods, in many conventional PSA models only hardware reliability is addressed with the assumption that software reliability is perfect or very high compared to hardware reliability. This study focused on developing a new method of safety-critical software reliability quantification, derived from hardware-software integrated environment testing. Since the complexity of hardware and software interaction makes the possible number of test cases for exhaustive testing well beyond a practically achievable range, an importance-oriented testing method that assures the most efficient test coverage was developed. Application to the test of an actual NPP reactor protection system demonstrated the applicability of the developed method and provided insight into complex software-based system reliability.

A Study on the Reliability of S/W during the Developing Stage (소프트웨어 개발단계의 신뢰도에 관한 연구)

  • Yang, Gye-Tak
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.14 no.5
    • /
    • pp.61-73
    • /
    • 2009
  • Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or Logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimater and maximum likelihood estimater for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

A Comparison Study on Software Testing Efforts (소프트웨어 테스트 노력의 비교 연구)

  • Choe, Gyu-Sik
    • Proceedings of the KIEE Conference
    • /
    • 2003.11c
    • /
    • pp.818-822
    • /
    • 2003
  • We propose a software-reliability growth model incoporating the amount of uniform and Weibull testing efforts during the software testing phase in this paper. The time-dependent behavior of testing effort is described by uniform and Weibull curves. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, the model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. The optimum release time is determined by considering how the initial reliability R(x|0) would be. The conditions are $R(x|0)>R_o$, $R_o>R(x|0)>R_o^d$ and $R(x|0)<R_o^d$ for uniform testing efforts. Ideal case is $R_o>R(x|0)>R_o^d$. Likewise, it is $R(x|0){\geq}R_o$, $R_o>R(x|0)>R_o^{\frac{1}{g}$ and $R(x\mid0)<R_o^{\frac{1}{g}}$ for Weibull testing efforts. Ideal case is $R_o>R(x|0)>R_o^{\frac{1}{g}}$.

  • PDF