• International Journal of Reliability and Applications
• /
• 제4권3호
• /
• pp.113-129
• /
• 2003

Based on moments inequalities new testing procedures are derived for testing exponentiality against new renewal better than used (NRBU) and renewal new better than used (RNBU). These classes play an important role in formulating repair or replacement policies. The asymptotic Pitman efficiency of (NRBU) and (RNBU) testes are studied. Selected critical values are tabulated for sample sizes n=5(1) 50. The power estimates for some commonly used life distributions in reliability are also calculated. Some set of real data is used as an example to elucidate the use of the proposed test statistic for practical reliability analysis. The problem in case of right-censored data is also handled.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.227-232
• /
• 2004

The failure of geogrids can be defined as an excessive creep strain which causes the collapse of slopes and embankments. In this study, the accelerated creep tests were applied to two different types of polyester geogrids, at 75, 80, 85$^{\circ}C$ by applying 50% load of ultimate tensile strengths using a newly designed test equipment which is allowed the creep testing at higher temperatures. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results indicate that the conventional procedures with the newly designed test equipment are shown to be effective in prediction of the lifetimes of geogrids with shorter test times. In addition, the predicted lifetimes of geogrids having different structures at various creep strains give guidelines for users to select the proper geogrids in the fields.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2008

소프트웨어의 테스트노력 곡선으로서 현재까지는 로지스틱 곡선이 가장 이상적인 것으로 연구되고 있다. 테스트 단계중에 소요되는 테스트노력의 양에 대한 결함 검출비를 현재의 결함 내용에 비례하는 것으로 가정하여 소프트웨어 신뢰도 성장 모델을 비동차 포아송 프로세스(NHPP)로 공식화하되, 이 모델을 이용하여 소프트웨어 신뢰도 척도에 대한 데이터 분석기법을 개발한다. 모든 소프트웨어 개발 환경에서 지금까지 제시된 여러 곡선 중 하나에 의해서 테스트노력 소요 곡선을 표현하는 것은 적절하지 못하다는 것이 밝혀지고 있다. 그러므로, 본 논문에서는 로지스틱 테스트노력 곡선이 소프트웨어의 개발/테스트 노력곡선으로 적절하게 표현될 수 있다는 것과 실제 데이터를 근거로 하여 적용하여서 예측성이 매우 좋은 능력을 가지고 있다는 것을 보이고자 한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.37-50
• /
• 2006

The accelerated life tests of the catalytic gas sensor were performed at three different gas concentration conditions. From the test data, the power-Weibull model was estimated and the acceleration factor between test condition 25%LEL(Lowe Explosive Limit) and use condition 5%LEL was about 3 according to this acceleration model. Using this acceleration factor, life test specification for qualifying that B10 lifetime of the catalytic gas sensor meets the goal lifetime (5 years) was designed.

• International Journal of Computer Science & Network Security
• /
• 제23권9호
• /
• pp.157-161
• /
• 2023

Reliability is one of the computable quality features of the software. To assess the reliability the software reliability growth models(SRGMS) are used at different test times based on statistical learning models. In all situations, Tradational time-based SRGMS may not be enough, and such models cannot recognize errors in small and medium sized applications.Numerous traditional reliability measures are used to test software errors during application development and testing. In the software testing and maintenance phase, however, new errors are taken into consideration in real time in order to decide the reliability estimate. In this article, we suggest using the Weibull model as a computational approach to eradicate the problem of software reliability modeling. In the suggested model, a new distribution model is suggested to improve the reliability estimation method. We compute the model developed and stabilize its efficiency with other popular software reliability growth models from the research publication. Our assessment results show that the proposed Model is worthier to S-shaped Yamada, Generalized Poisson, NHPP.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.240-249
• /
• 2018

Purpose: The purpose of this research is to find which technique, between the PAUT (Phased array ultrasonic test) that has been used widely in practice and RT (Radiographic test) that was used widely in the past, has the higher reliability as a non-destructive testing of welding points in water wall tubes. Methods: To evaluated the reliability of non-destructive testing, eleven test pieces that were fabricated intentionally, which have the most frequently occurred defect types in water wall tubes and then both the PAUT and RT were performed on those eleven test pieces to compare their reliability. Results: The differences of type of defect, length are occurred due to the characteristics of nondestructive testing. The RT could not detect the lack of fusion defect type in specimen #4 and #8 while PAUT could not detect the lateral crack and 1 mm size small porosity in specimen #11. Conclusion: It is concluded that applying both the RT and PAUT result the best reliability rather than applying only one test method, if it is possible, in nondestructive testing of weld water wall tube in thermal power plant boiler case.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권6호
• /
• pp.2139-2151
• /
• 2014

Embedded system testing, especially long-term reliability testing, of flash memory solutions such as embedded multi-media card, secure digital card and solid-state drive involves strategic decision making related to test sample size to achieve high test coverage. The test sample size is the number of flash memory devices used in a test. Earlier, there were physical limitations on the testing period and the number of test devices that could be used. Hence, decisions regarding the sample size depended on the experience of human testers owing to the absence of well-defined standards. Moreover, a lack of understanding of the importance of the sample size resulted in field defects due to unexpected user scenarios. In worst cases, users finally detected these defects after several years. In this paper, we propose that a large number of potential field defects can be detected if an adequately large test sample size is used to target weak features during long-term reliability testing of flash memory solutions. In general, a larger test sample size yields better results. However, owing to the limited availability of physical resources, there is a limit on the test sample size that can be used. In this paper, we address this problem by proposing a self-adaptive reliability testing scheme to decide the sample size for effective long-term reliability testing.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.124-131
• /
• 2012

This paper presents a spreadsheet-based reliability prediction simulation framework for the conceptual product design stage to acquire system reliability information in timely manner. During early stage, reliability performance deals with both known and unknown failure rates and component-level and subsystem-level failure estimate to predict system reliability. A technique for performing life testing simulation using Excel spreadsheet has been developed under the such circumstances. This paper also discuss the results obtainable from this method such as reliability estimate, mean and variance of failures and confidence intervals. The resultant of this reliability prediction system is mainly benefitting small and medium-sized enterprise's field engineers.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.413-425
• /
• 2005

As an alternative to traditional life testing, degradation tests can be effective in assessing product reliability when measurements of degradation leading to failure can be observed. This article presents an accelerated degradation testing for vacuum fluorescent displays (VFDs). The accelerated degradation model is based on Arrhenius-lifetime relationship for cathode temperatures. We compare the results between accelerated degradation test and test at normal use condition. Accelerated degradation test for display devices is observed as an efficient method to warrantee product reliability to customers, as well as a tool to save time and costs.

• 인터넷정보학회논문지
• /
• 제7권2호
• /
• pp.151-160
• /
• 2006

소프트웨어 품질 평가 시스템과 소프트웨어 품질 평가 범위는 소프트웨어 신뢰도 측정을 위해서 정의되어져야 한다. 본 연구에서 소프트웨어 신뢰도 품질 평가 메트릭을 개발하고 소프트웨어 신뢰도를 측정하기 위한 적당한 범주의 테스팅에 대해서 조사한다. 연구를 성공적으로 수행하기 위해서 소프트웨어의 버그수를 이용해서 소프트웨어의 실패시간을 예측했다. 소프트웨어의 신뢰도는 소프트웨어의 품질 평가에 있어서 중요하다. 국제 표준 ISO/IEC 9126의 소프트웨어 신뢰성 평가 메트릭을 기초로 하여 소프트웨어 신뢰도를 평가할 수 있는 메트릭을 제안하고 이것을 중심으로 하여 평가방안을 제안한다.