• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.69-78
• /
• 2014

In this paper, characteristics of wireless power transfer (WPT) systems using magnetically coupled resonance scheme with relay coils are investigated and modeled. Especially, asymmetric frequency splitting characteristics in over-coupled region of WPT with relays are measured and accurately modeled. Transmitter, receiver, and relay coils are modeled with R, L, C equivalent circuits. Using these circuit models and mutual inductances between coils, a WPT system is described with a linear matrix equation. For under-coupled region, a matrix is simplified considering only mutual inductances between adjacent coils. An analytical transfer characteristic of WPT system vs. distance is extracted using an inverse matrix that is acquired by Gauss elimination method for the simplified matrix. For over-coupled region, a matrix considering mutual inductances between non-adjacent coils is used to predict a frequency splitting characteristics accurately. A 6.3MHz WPT system with relay coils is implemented and measured. An accuracy of the model is investigated by comparing the output of the model with the measured results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1373-1391
• /
• 2022

We investigate mobile multiple-input multiple-output (MIMO) molecular communication via diffusion (MCvD) system which is consisted of two source nodes, two destination nodes and one relay node in the mobile three-dimensional channel. First, the combinations of decode-and-forward (DF) relaying protocol and network coding (NC) scheme are implemented at relay node. The adaptive thresholds at relay node and destination nodes can be obtained by maximum a posteriori (MAP) probability detection method. Then the mathematical expressions of the average bit error probability (BEP) of this mobile MIMO MCvD system based on DF and NC scheme are derived. Furthermore, in order to minimize the average BEP, we establish the optimization problem with optimization variables which include the ratio of the number of emitted molecules at two source nodes and the initial position of relay node. We put forward an iterative scheme based on block coordinate descent algorithm which can be used to solve the optimization problem and get optimal values of the optimization variables simultaneously. Finally, the numerical results reveal that the proposed iterative method has good convergence behavior. The average BEP performance of this system can be improved by performing the joint optimizations.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.185-187
• /
• 2000

Fault current is flowed into 154/23kV M. Tr when line-to-ground fault occurs in power system. NGR(Neutral Grounded Reactor) is set up in order to prevent M.Tr fault by limiting magnitude of fault currents. Here, disconnection of NGR causes voltage increase by L-C resonance and line-to-ground fault in an unearthed system results in voltage increase at healthy phases. So Over Voltage Ground Relay(OVGR) is used for tripping M.Tr. Also, buses at second phases of M.Trs are all connected with section circuit breakers closed for the purpose of parallel operation and load shedding. In case of speciality buses are comprised of power cable in part for GIS connection. When no-load charged cable or bus is open by a section CB, unbalanced voltage charged on the bus is induced. Also discrepant opening time for circuit breakers on different phases gives rise to unbalanced zero sequence voltage. It was observed that this zero sequence voltage detected in the 22.9kV P.T (Potential Transformer for bus) mal-operated 59GT and tripped M.Tr. The zero sequence voltage of which vanishing time is longer than relay operating time came out by EMTDC simulation. Also, it was shown that the voltage waves of actual test are similar to those of simulation. On the basis of above results, R-C circuit complement on the relay without any effect on a power system made operating time of the relay longer than vanishing time of distorted waves. Consequently, operating time of the relay was delayed and magnitude of distorted waves was decreased by increasing time constant of the relay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.487-494
• /
• 2010

This paper presents an OFDM-based dual-hop multi-relay system with best relay selection maximizing the mutual information. For the system either with decode-and-forward (DF) relays or with amplify-and-forward (AF) relays, we derive a lower-bound on the outage probability and the diversity order achievable in frequency selective fading channels and provide the outage capacity from simulation. Performance evaluation shows that both DF and AF provide the same diversity order as in the lower-bound but DF of which the outage probability is much closer to the lower-bound provides a better outage capacity than AF. It is also observed that the SNR gain of DF over AF gets larger as either the number of resolvable multipaths or the number of relay candidates increases, which makes DF relaying more favorable to the OFDM-based multi-relay system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.65-71
• /
• 2016

Cooperative relaying systems have been studied actively to improve the system performance effectively in wireless fading channels. Most of the cooperative relay studies are assumed fixed relay, recently the performance analysis of the cooperative relaying systems with spatially random relays considering the practical mobile environment are introduced. However the comparative studies for relay selection methods of incremental cooperative relay systems, the performance of which is influenced by the selection methods, have not been studied. Therefore we derive the performance of the system which has MRC(Maximal-ratio combining) with Max SNR(signal-to-noise ratio) selection or Max-min SNR selection, respectively. And the outage performances of the system with Max or Max-min selection method are compared for different transmit power allocation to the source and to the relays. The analytical results serve as useful tools for relay selection and power allocation to transmit nodes for opportunistic incremental relaying systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.606-610
• /
• 1991

A relay is the one of small electrical components for automobiles and used for industry widely. We have developed the automation system for relay assembly and test to make it improve the productivity and decrease the man power. In order to determine the objective process of automation, we investigated 6 small and medium sized-enterprises and 1 greate sized-enterprise producing relays. And, we selected 2 model enterprises of them. One of the two is the system to develop. The scope of our study is the analyse of the conventional workcell, the determination of the system specification, the design of the system layout, the determination of the system cycle time, the design of the system mechanism, and the development of the controller for the system. We think that the developed system may be solve the technical and the economical problems interrupted efficiential automation of domastic small and medium sized-enterprises, and improve the international competitive power.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.581-588
• /
• 2004

Power qualify monitoring system is devoted to more concern than before, because the innovation of industrial technology needs more accurate instruments and more advanced power quality. This paper was studied on using data of the protective relay by Power Quality Monitor. This paper was proposed the wave storage condition and monitoring clauses of the protective relay as a power quality monitoring device. The protective relay will have problem to save data for PQM analysis because the protective relay memory is limited. Therefore this paper was proposed new a data compression of data got from the protective relay. This method is wave compression comparison algorithm using the DFT. The compression rate is higher than any other established method. This method can be real time storage. This algorithm is verified using the comparison among other compression rate and proved by Real Time Digital Simulator (RTDS).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.139-145
• /
• 2012

This paper shows a novel interference cancellation method of relay utilizing to the CGM algorithm in wireless communication environments. It is a problem that relay have interference cause by feedback signal of it. CGM algorithm obtained weight value that can remove the interference due to feedback signal of relay. In this paper, we confirm that performance of CGM algorithm is far superior with suitable cancellation value to remove the feedback signal. Also, we implement CGM module to verify the real-time processing of CGM algorithm using to DSP. Based on the analysis from computer simulation, it is observed that proposed algorithm is suitable for the relay in time-varying environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3276-3292
• /
• 2015

Relay-assisted D2D communication extends the communication range of the D2D pairs and helps users to form D2D pairs effectively. However, due to the introduction of the multi-hop relaying, the D2D communication has to occupy extra transmission time, which may decrease the efficiency of the communication system. In this paper, we propose a scheme to make node receive D2D signal and BS signal at overlapping time to improve the spectrum efficiency according to ZigZag decoding and successive-interference-cancellation (SIC). In this way, more data can be delivered during the same duration, thus the network throughput can be further improved. Numerical results verify the performance improvement of the proposed scheme when compared with a baseline scheme. Moreover, we expand the proposed scheme from one-hop relay scenario to multi-hop relay scenario.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2015

In this paper, we consider a relaying system which employs a single relay in a wireless network with distributed sources and destinations. Here, all source, destination, and relay nodes are equipped with multiple antennas. For amplify-and-forward relay systems, we confirm the achievable sum rate through a joint multiple source precoders and a single relay filter design. To this end, we propose a new linear processing scheme in terms of maximizing the sum rate performance by applying a blockwise relaying method combined with geometric programming techniques. By allowing the global channel knowledge at the source nodes, we show that this joint design problem is formulated as a standard geometric program, which can guarantees a global optimal value under the modified sum rate criterion. Simulation results show that the proposed blockwise relaying scheme with the joint power allocation method provides substantial sum rate gain compared to the conventional schemes.