• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.45-58
• /
• 2019

As modern people's daily lives are becoming more harsh in Korea, the so-called Kidults generation has appeared since a few years ago as adults have come back to their childhood sensibility and are exposed to various cultures online, and there are many people who have a hobby for collecting toys. However, as there is currently no formalized system for individual toy trade online, it is difficult to acquire expertise and share information with each other through a major portal site's $caf{\acute{e}}$, and is exposed to security or fraud while trading toys. In this paper, we design and implementation of a web-based toy trading system. Analyzing the advantages and disadvantages of the various trading and relay systems currently in use, it will provide opportunities for professional toy knowledge and information exchange to many users who have a hobby of collecting toys, and will greatly help vitalize the toy market through a secure and convenient trading environment between individuals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1574-1580
• /
• 2021

This paper designs and presents the results of an air network simulation radio transmission link applied with a multi-beam active phase array antenna simulator in a testbed system for verifying an air network currently underway as a technology development task. Using the Ku band, the Radio transmission link was designed in consideration of the link budget to satisfy the requirements for the system being developed. Considering short-distance links and long-distance links, the required EIRP and G/T performance scales of multi-beam repeaters and mission planes were applied to confirm the minimum and maximum link margins based on Eb/No. In this Radio Transmission Link design, the application analysis results such as rainfall availability are used to effectively establish standards when selecting the operating radius of the multi-beam relay system and related system standards.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.441-448
• /
• 2022

In the distribution system, there are multiple power protection systems such as circuit breakers at substations, and reclosers, minimum circuit ampacities, fault interrupters on distribution lines. They are widely used to prevent partial outages, cascading power failure or blackout so that other healthy systems could maintain the integrity in case of the instant fault or permanent failure on the power lines. However, when a fault happens, it could cause a major black out due to the lack of the protection cooperation between the protection relay of the circuit breaker at a substation and a protection system on the distribution lines. To achieve the power system integrity better, it is required to develop the circuit breaker which can be operational within 1 cycle(16ms). In this study, the high speed circuit breaker which is filled up with eco-friendly gas is developed. This equipment achieved an excellent test results based on IEC 62271-111 standard. It is respected that this equipment would contribute to prevent the wide area blackout by isolating a fault area quicker and faster.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.5
• /
• pp.1-8
• /
• 2023

In this paper, we implement a control system for an IoT-based backpack type vacuum cleaner using a smart device such as a smart phone or smart watch. The implementation system consists of control module produces, control module programming, and smart device programming. The control module is made of Arduino Nano, HM-10 BLE(Bluetooth Low Energy) module and relays as basic parts. The smart device exchanges signals with the control module via bi-directional BLE communication, which allows it to control the start/stop of the vacuum cleaner. Backpack type vacuum cleaners are effective for cleaning high places that require the use of ladders. However, it is often necessary to take off the backpack type cleaner to start/stop it. The IoT-based vacuum cleaner control system implemented in this paper fundamentally solves the problem by allowing users to control the start/stop of the vacuum cleaner without taking it off.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.87-92
• /
• 2015

In this Paper, we proposed optimization of system performance, optimal splitting factor ${\alpha}$ applied to power splitting protocol with relay protocol with decode and forward undergo co-channel interference. We can possible to optimize and maximize the channel capacity of the receive performance and the efficiency of the network through optimal factor of splitting protocol. We verified BER performance and Channel capacity and Outage probability for the proposed scheme over Rayleigh fading through Monte-Carlo simulation.

• Journal of Convergence Society for SMB
• /
• v.4 no.1
• /
• pp.7-15
• /
• 2014

In this paper, we propose an efficient routing protocol to achieve an optimal route searching process of the network lifetime by balancing power consumption per node. The proposed protocols aim at finding energy-efficient paths at low protocol power. In our protocol, each intermediate node keeps power level and branch number of child nodes and it transmits the data the nearest neighbor node. Our protocol may minimize the energy consumption at each node, thus prolong the lifetime of the system regardless of the location of the sink outside or inside the cluster. In the proposed protocol for inter-cluster communication, a cluster head chooses a relay node from its adjacent cluster heads according to the node's residual energy and its distance to the base station. Simulation results show that proposed protocol successfully balances the energy consumption over the network, and achieves a remarkable network lifetime improvement as highly as 7.5%.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.459-467
• /
• 2016

Using a line scan camera and a Galvano mirror, we constructed a high-speed line-scanning microscope that can generate 2D images ($8000{\times}8000pixels$) without any moving parts. The line scanner consists of a Galvano mirror and a cylindrical lens, which creates a line focus that sweeps over the sample. The measured resolutions in the x (perpendicular to line focus) and y (parallel to line focus) directions are both $2{\mu}m$, with a 2X scan lens and a 3X relay lens. This optical system is useful for measuring defects, such as spalling, chipping, delamination, etc., on the surface of carbon fiber reinforced plastic (CFRP) holes after machining in conjunction with adjustments in the angle of LED lighting. Defects on the inner wall of holes are measured by line confocal laser scanning. This confocal method will be useful for analyzing defects after CFRP machining and for fast 3D image reconstruction.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.98-100
• /
• 2005

This paper describes link analysis on the processed data, HRIT (High Rate Information Transmission) and LRIT (Low Rate Information Transmission), for the preliminary design of interface between COMS (Communication, Ocean and Meteorological Satellite) and ground station. At the MODAC (MeteorologicaVOcean Data Application Center), the processed data are transmitted to user station via COMS with normalization and calibration by pre-processing of MI (Meteorological Imager) data. Due to consider satellite as radio relay, overall analysis containing uplink and downlink is needed. Specific link parameters can be obtained with using the outcomes of SRR (System Requirement Review) which was held on 13-14 June 2005, in Toulouse. From the relation between overall link margin and output power of HPA (High Power Amplifier) of MODAC, it is shown that even though the minimum power related with COMS receiving power range is transmitted at MODAC, the obtained link margin of HRIT could be above 3 dB at user station which antenna elevation angle is 10 degree.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.961-971
• /
• 2006

The purpose of this study was firstly to provide fundamental data on the activation for the IP-based video phone for the special consumer related to the physically handicapped; secondly to inform empirical data for the consumer public policy in the information technology market, specially for the deaf people. The results of study showed that consumer needs extend to not only simple voice communication for general consumers but also special demands for both the handicapped and the elderly. This study also indicated that VoIP's characteristics of technology would be easily applied to the TRS or VRS which can be adapted to the special consumer market so that VoIP service would be optimal technology for the special consumers like the deaf. In order to successfully implement TRS & VRS business, the paper proposed as follows; 1) the provision of VoIP service enable to satisfying consumers in special market such as the deaf market and the elderly market, 2) the necessity of supporting policy by the related law, and 3) the construction of the system inducing interests from the market participants.