• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.390-395
• /
• 2020

몇몇 포화를 갖는 공정에서 경제적인 운전점이 포화시작점에 있게 된다. 고전적인 피드백 제어기는 포화시작점에서 동특성이 급박하게 바뀌고 포화가 된 상태에서는 피드백을 위한 정보가 없기 때문에 사용할 수가 없다. 포화점과 동특성이 알려져 있고 바뀌지 않을 때는 모델예측제어 같은 최적화를 기반으로 하는 방법들이 어려움 없이 이 제어 문제를 처리할 수 있다. 그렇지 않으면, 이 포화점과 등특성을 추적하는 적응 방법이 첨가되어야 한다. 여기서는, 이 제어 문제를 해결할 수 있는 매우 간단한 방법들로서, 최근의 slope seeking method와 relay feedback method에 기반한 두가지 제어 방법을 제안한다. 포화현상을 갖는 이차 액위제어 공정에 적용한 모사를 통하여 그 성능을 검사하였다. 모사결과는 제안하는 본 제어 방법들이 포화시작점을 5% 이내로 찾고 유지하는 것을 보여주고 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.21-40
• /
• 2018

In this paper, we propose the distributed robust beamforming design scheme in cognitive two-way amplify-and-forward (AF) relay networks with imperfect channel state information (CSI). Assuming the CSI errors follow a complex Gaussian distribution, the objective of this paper is to design the robust beamformer which minimizes the total transmit power of the collaborative relays. This design will guarantee the outage probability of signal-to-interference-plus-noise ratio (SINR) beyond a target level at each secondary user (SU), and satisfies the outage probability of interference generated on the primary user (PU) above the predetermined maximum tolerable interference power. Due to the multiple CSI uncertainties in the two-way transmission, the probabilistic constrained optimization problem is intractable and difficult to obtain a closed-form solution. To deal with this, we reformulate the problem to the standard form through a series of matrix transformations. We then accomplish the problem by using the probabilistic approach based on two sorts of Bernstein-type inequalities and the worst-case approach based on S-Procedure. The simulation results indicate that the robust beamforming designs based on the probabilistic method and the worst-case method are both robust to the CSI errors. Meanwhile, the probabilistic method can provide higher feasibility rate and consumes less power.

• 한국통신학회논문지
• /
• 제33권10B호
• /
• pp.911-918
• /
• 2008

본 논문에서는 방향성 안테나를 이용하여 3섹터 구조를 갖는 Narrow-Beam Trisector Cell (NBTC)과 Wide-Beam Trisector Cell (WBTC) 구조의 WiBro 시스템에 IEEE802.16j 기반의 멀티홉 중계기를 도입하여 커버리지를 확장하는 새로운 형태의 NBTC와 WBTC 구조를 제안한다. 제안한 구조는 최적화 모델을 통해 트래픽 분포에 따른 최적 배치된 기지국과 멀티홉 중계기의 수, 각 기지국의 확장되는 커버리지, 그리고 설치비용 등을 기지국만 배치하는 기존의 전형적인 구조와 비교 분석하였다. 분석 결과를 통해 주어진 전체면적에 중계기를 효율적으로 배치한다면 절약되는 설치비용을 알 수 있었고, 제안하는 멀티홉 중계기가 도입된 NBTC와 WBTC 방식 중에서 트래픽 분포가 높은 지역에서는 WBTC 방법을 이용하고, 트래픽 분포가 적은 지역에서는 NBTC 방법을 이용한다면 커버리지 확장과 설치비용 절약 측면에서 보다 효율적임을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1043-1051
• /
• 2018

The coordination of directional overcurrent relay (DOCR) is employed in this work, considering gray wolf optimizer (GWO), a recently designed optimizer that employs the hunting and leadership attitude of gray wolves for searching a global optimum. In power system protection coordination problem, the objective function to be optimized is the sum of operating time of all the main relays. The coordination of directional overcurrent relays is formulated as a linear programming problem. The proposed optimization technique aims to minimize the time dial settings (TDS) of the relays. The calculation of the Time Dial Setting (TDS) setting of the relays is the core of the coordination study. In this article two case studies of IEEE 6-bus system and IEEE 30-bus system are utilized to see the efficiency of this algorithm and the results had been compared with the other algorithms available in the reference and it was observed that the proposed scheme is quite competent for dealing with such problems. From analyzing the obtained results, it has been found that the GWO approach provides the most globally optimum solution at a faster convergence speed. GWO has achieved a lot of relaxation due to its easy implementation, modesty and robustness. MATLAB computer programming has been applied to see the effectiveness of this algorithm.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.65-71
• /
• 2016

To increase the retaining force, a novel design for a concentric, bi-directional, electromagnetic valve actuator that contains double-layer permanent magnets is presented in this paper. To analyze the retaining-force change caused by the magnets, an equivalent magnetic circuit (EMC) model is established, while the EMC circuit of a double-layer permanent-magnet valve actuator (DLMVA) is also designed. Based on a 3D finite element method (FEM), the calculation model is built for the optimization of the key DLMVA parameters, and the valve-actuator optimization results are adopted for the improvement of the DLMVA design. A prototype actuator is manufactured, and the corresponding test results show that the actuator satisfies the requirements of a high retaining force under a volume limitation; furthermore, the design of the permanent magnets in the DLMVA allow for the attainment of both a high initial output force and a retaining force of more than 100 N.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1590-1599
• /
• 2016

The installation of distributed generation (DG) in the electrical networks has numerous advantages. However, connecting and disconnecting of DGs (CADD) leads to some problems in coordination of protection devices due to the changes in the short circuit levels in the different points of network. In this paper, an adaptive method is proposed based on available setting groups (SG) of relays. Since the number of available SG is less than possible CADD states, a classifying index (CI) is defined to categorize the several states in restricted setting groups. Genetic algorithm (GA) with a suitable objective function (OF) is used as an optimization method for the classification. After grouping, a modified coordination method is applied to achieve optimal coordination for each group. The efficiency of the proposed technique is demonstrated by simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.1957-1975
• /
• 2016

The outage probability (OP) performance of multiple-relay-based incremental hybrid decode-amplify-forward (IHDAF) relaying mobile-to-mobile (M2M) networks with transmit antenna selection (TAS) over N-Nakagami fading channels is investigated in this paper. The closed-form expressions for approximate OP of the optimal and suboptimal TAS schemes are derived. The power allocation problem is formulated for performance optimization. Then the OP performance under different conditions is evaluated through numerical simulations to verify the analysis. The simulation results showed that optimal TAS scheme has a better OP performance than suboptimal TAS scheme; the power-allocation parameter has an important influence on the OP performance.

• ETRI Journal
• /
• 제46권2호
• /
• pp.175-183
• /
• 2024

Recently, polar code has attracted the attention of many scholars and has been developed as a code technology in coded-cooperative communication. We propose a polar code scheme based on Plotkin structure and quasi-uniform punching (PC-QUP). Then we apply the PC-QUP to coded-cooperative scenario and built to a new coded-cooperative scheme, which is called PCC-QUP scheme. The coded-cooperative scheme based on polar code is studied on the aspects of codeword construction and performance optimization. Further, we apply the proposed schemes to space-time block coding (STBC) to explore the performance of the scheme. Monte Carlo simulation results show that the proposed cooperative PCC-QUP-STBC scheme can obtain a lower bit error ratio (BER) than its corresponding noncooperative scheme.

• 한국인터넷방송통신학회논문지
• /
• 제15권4호
• /
• pp.87-92
• /
• 2015

본 논문에서는 복호 후 전송 프로토콜이 적용된 중계기에 전력 분배 프로토콜을 적용하여 수집되는 전력량을 최대화함과 동시에 수신단의 수신 불량 문제를 해결할 수 있는 전력 분배 인자 ${\alpha}$를 선택하는 방안을 제안한다. 레일리 페이딩과 복호 후 전송 프로토콜의 영향이 적용된 모의실험 파라미터를 통해 무선 기기가 배치된 실제 네트워크의 상황을 고려하며, 최적의 전력 분배 인자 ${\alpha}$의 값을 네트워크에 적용할 경우 배치되어 있는 무선 기기의 채널 용량 및 수신 성능, 네트워크의 효율성을 최적화 시킬 수 있다. 전체적인 시스템의 단대단 아웃티지 확률, 채널 용량, 비트 오류율에 대한 성능을 몬테-카를로 실험을 통해 분석함으로서 시스템의 성능을 평가한다.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1053-1058
• /
• 2010

A large modern wind farm should satisfy the requirements for a grid and accomplish the optimization of the wind farm system. The wind farm intertie protection system should consider a Fault Ride-Through (FRT) requirement for more reliable protection. The wind farm should keep connected to the grid in the case of a grid fault whilst it should be isolated for an intertie fault. This paper proposes a distance relaying algorithm suitable for wind farm intertie protection considering the FRT requirement. The proposed algorithm estimates the impedance based on a differential equation method because the frequency of the voltage and current deviates the nominal frequency. The algorithm extends the reach of Zone 1 up to 100 % of the length of the intertie to implement the FRT requirement. To discriminate an intertie fault from a grid fault, the algorithm uses a voltage blocking scheme because the magnitude of the voltage at the relaying point for an intertie fault becomes less than that for a grid fault. The performance of the algorithm is verified using a PSCAD/EMTDC simulator under various fault conditions. The algorithm can discriminate successfully the intertie fault from grid fault and thus helps to implement the FRT requirement of a wind farm.