• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.84-92
• /
• 2015

Multi-hop relay networks have been widely considered as a promising solution to extend the coverage area and to reduce the deployment cost by deploying the relay stations (RSs) in mobile communication systems. Suitable deployment for the RSs is one of the most important features of the demand nodes (DNs) to obtain a high data transmission rate in such systems. Considering a tradeoff among the network throughput, the deployment budget, and the overall coverage of the systems, efficient RS deployment schemes and corresponding algorithms must be developed and designed. A novel cluster-based RS deployment scheme is proposed in this paper to select the appropriate deployment locations for the relay stations from the candidate positions. To make an ideal cluster distribution, the distances between the DNs are calculated when deploying the RSs. We take into account the traffic demands and adopt a uniform cluster concept to reduce the data transmission distances of the DNs. On the basis of the different candidate positions, the proposed scheme makes an adaptive decision for selecting the deployment sites of the RSs. A better network throughput and coverage ratio can be obtained by balancing the network load among the clusters. Simulation results show that the proposed scheme outperforms the previously known schemes in terms of the network throughput and the coverage ratio. Additionally, a suitable deployment budget can be implemented in multi-hop relay networks.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.75-81
• /
• 2009

The cellular system in the next generation decreases the range of transmission of a signal as well as increases the rate of transmission adapting the method of multi-hop relaying with the relay. However, the fact of decreasing the range of transmission with the method of multi-hop relaying means increasing interferential amount in the outer cell; therefore, the deployment of the relay can affect to the function of the cellular system. In this thesis, the deployment of the relay is determined for the maximum rate of transmission, based on the transmission power of the relay and the variation of interferential amount. The condition to determine the deployment of the relay is analyzed with the mathematical model; in addition, its performance is verified through the result of a simulation. Based on the analysis of this thesis, the established deployment and transmission power of the relay to minimize the average outage probability exist. Furthermore, the relay contributes to enlargement of capacity of cells, decreasing the average outage probability in the situation of less severe interference between cells with reuse of frequency. However, the relay should be restrained in use in the situation of severe interference between cells due to the fact that the outage probability of inter-cells can be increased.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2011

For rapid formed the ad hoc wireless backbone network in disaster scene, It is necessary for real-time deployment scheme of wireless ad hoc relay devices by first responders without pre-planning. However, in order to realize this scheme, redundant deployment should be minimized, as well as optimal location of relay devices should be selected to expand communication coverage. Therefore, in this paper, we propose a new deployment scheme of relay devices to optimize communication coverage and then through simulations showed that improved performance of algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.146-148
• /
• 2014

In LTE-Advanced (LTE-A) networks, Relay nodes (RN) are used to improve the system coverage. However, it also brings new kind of interference to users which reduces the system performance. In this paper, we use an optimization relay node deployment to reduce the interference as much as possible and resource allocation to improve the user throughput. Our simulation results show our method is able to improve the user SINR and throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.594-599
• /
• 2010

This paper studies the effect of the deployment position of the relay stations on the downlink signal-to-interference-noise-ratio (SINR) in multihop cellular networks. Two different relay deployment scenarios are considered where relay stations are located either inside cells or on the boundary among adjacent cells. The fundamental contribution is to compare fairly the average SINR between two scenarios with the proposed relay modeling framework that includes multi-cell geometries and inter-cell interferences. The mathematical results show that the SINR increases when relay stations are located inside cells because of higher received signal power.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2889-2909
• /
• 2017

Wireless sensor networks (WSNs) have attracted lots of attention in recent years due to their potential for various applications. In this paper, we seek how to efficiently deploy relay nodes into traditional static WSNs with constrained locations, aiming to satisfy specific requirements of the industry, such as average energy consumption and average network reliability. This constrained relay node deployment problem (CRNDP) is known as NP-hard optimization problem in the literature. We consider addressing this multi-objective (MO) optimization problem with an improved Artificial Bee Colony (ABC) algorithm with a linear local search (MOABCLLS), which is an extension of an improved ABC and applies two strategies of MO optimization. In order to verify the effectiveness of the MOABCLLS, two versions of MO ABC, two additional standard genetic algorithms, NSGA-II and SPEA2, and two different MO trajectory algorithms are included for comparison. We employ these metaheuristics on a test data set obtained from the literature. For an in-depth analysis of the behavior of the MOABCLLS compared to traditional methodologies, a statistical procedure is utilized to analyze the results. After studying the results, it is concluded that constrained relay node deployment using the MOABCLLS outperforms the performance of the other algorithms, based on two MO quality metrics: hypervolume and coverage of two sets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.874-887
• /
• 2011

Compared to nomadic and fixed relay stations, vehicle-mounted mobile relay stations show different characteristics caused by the time-variant topology, due to their mobility. Especially, a relay mounted in a vehicle is differentiated from nomadic or fixed relay by the restricted distance between the relay and associated mobile station and the variable density of relay deployment in a cell. In this paper, we identify the characteristics of vehicle-mounted mobile relay stations and provide some parameters that highly influence the performance of vehicle-mounted relay. Through simulation, we measure the effect of relay density, zone ratio, relay transmission power, and frame transmission mode on the performance of vehicle-mounted relay. The results show that the performance of vehicle-mounted relay is highly susceptible to the above vehicle-mounted relay-specific parameters.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.345-359
• /
• 2011

Decode-and-forward relaying is a promising enhancement to existing radio access networks and is already standardized in 3rd generation partnership project (3GPP) as a part of long term evolution (LTE)-Advanced Release 10. Two inband operation modes of relay nodes are supported, namely type 1 and type lb. Relay nodes promise to offer considerable gain for system capacity or coverage, depending on the deployment prioritization, in a cost-efficient way. Yet, in order to fully exploit the benefits of relaying, the inter-cell interference which is increased due to the presence of relay nodes should be limited. Moreover, large differences in the received power levels from different users should be avoided. The goal is to keep the receiver dynamic range low in order to retain the orthogonality of the single carrier-frequency division multiple access system. In this paper, an evaluation of the relay based heterogeneous deployment within the LTE-Advanced uplink framework is carried out by applying the standardized LTE Release 8 power control scheme both at evolved node B and relay nodes. In order to enhance the overall system performance, different power control optimization strategies are proposed for 3GPP urban and suburban scenarios. A comparison between type 1 and type 1b relay nodes is as well presented to study the effect of the relaying overhead on the system performance in inband relay deployments. Comprehensive system level simulations show that the power control is a crucial means to increase the cell edge and system capacities, to mitigate inter-cell interference and to adjust the receiver dynamic range for both relay node types.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1670-1679
• /
• 2011

In the area of wireless sensor networks, sensor coverage and network connectivity problems are caused by a limited detection range and the communication distance of the nodes. To solve the coverage and connectivity problems, many studies are suggested, but most research is restricted to apply into the real environment because they didn't consider various environmental factors on wireless sensor network deployment. So in this paper, we propose a node deployment strategy considering environmental factors and the number of nodes in surveillance and reconnaissance sensor networks(SRSN). The proposed node deployment method divides the installation of the surveillance and reconnaissance sensor networks system into four steps such as identification of influences factors for node placement through IPB process, sensor node deployment based on sensing range, selection of monitoring site, and relay node deployment based on RF communication range. And it deploys the sensor nodes and relay nodes considered the features of the surveillance and reconnaissance sensor network system and environmental factors. The result of simulation indicates that the proposed node deployment method improves sensor coverage and network connectivity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.62-68
• /
• 2023

An aerial relay system utilizing an unmanned aerial vehicle(UAV) or drone is addressed for event-driven operations such as temporary communication services for disaster affected area, military and first responder support. UAV relay system (URS) targets to provide a reliable communication service to a remote user equipment or an operator, therefore, a fast UAV placement to guarantee a minimum quality of service(QoS) is important when an operation is requested. Researches on UAV utilization in communication systems mostly target to derive the optimal position of UAV to maximize the performance, however, fast deployment of UAV is much more important than optimal placement under emergency situations. To this end, this paper derives the feasible area for UAV placement, investigates the effect of performance requirements on that area, and suggests UAV placement to certainly guarantee the performance requirements. Simulation results demonstrate that the feasible area derived in this paper matches that obtained by an exhaustive search.