• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.291-297
• /
• 2009

Relaxation of high strength bolts was investigated. Block type and splice type specimens were fabricated with different types of bolts and different clamping lengths. Bolts were tightened to the specified torque. Clamping forces were measured through strain gauges installed on the shafts of bolts, while specimens were kept in a constant temperature and humidity. In all cases, ratio of clamping force reduction is less than 10%. Test results of different types of specimens and bolts and different clamping lengths were compared each other by using a simple model, which is suggested in this study for the estimation of bolt relaxation. The suggested model shows reasonably good agreements with test results for all cases. No difference is found between F13T and F10T bolts, but Dacro coated bolts shows higher relaxation than black bolts by approx. 30%. And also the comparison of test results shows that ratios of bolt relaxation become larger as clamping lengths of bolt shorter and the number of faying surfaces greater.

• Journal of muscle and joint health
• /
• v.1 no.1
• /
• pp.31-47
• /
• 1994

The purposes of this research are to examine the effects of muscle relaxation to the rheumatoid arthritis patients' physiological, psychological, and social adaptation, and to verify that the technique Is an effective tool for improving the patients' adaptation. This research utilized a qusi-experimental design that compares the pre-experiment measures and the post-experiment measures. The subjects of this study were 37 out-patients who were diagnosed for rheumatoid arthritis in P university hospital and K clinic between September 12, 1993 and November 30, 1993. The experimental group consisted of patients treated on Monday, Wednesday and Friday. The control group consisted of patients treated on Tuesday, Thursday and Saturday The pre-experimental survey utilized the following tools. The physiological adaptation was measured by a graphic rating scale for pain and activity of daily living. The psychological adaptation was measured by Zung's depression scale and Rosenberg's self-esteem scale : and the social adaptation was measured by Derogatis' psychosocial adjustment scale. The experimental group received muscle relaxation treatment for 15 minutes per day for the period of 2 weeks, the control group received no treatment and had quiet time. The post-experiment measurement was carried out similar to the pre-experiment survey, SPSS $PC^+$ is used to analyze the collected data. The reliabilities of the measurement tools were examined by Cronbach's ${\alpha}$ coefficients. The homogeneities between the experimental and control groups were tested by t-test and chi-square test, hypotheses were tested by t-test. This research found that the general characteristics between the groups were statistically homogenious. The physiological, psychological, and social adaptation between the groups in the pre-experimental survey were also statistically homogenious. The results of this research can be summarized as follows : 1. Concerning the Physiological adaptation, the experimental group showed a statistically lower pain score than the control group. Thus, muscle relaxation was effective to relieve the pain of rheumatoid arthritis patients (t=-2.95, p=.006). 2. Concerning the psychological adaptation, the experimental group showed a statistically lower depression score than the control group. Thus, muscle relaxation was effective to reduce the patient's depression(t=-4.00, p=.001). 3. Concerning social adaptation, the experimental group showed a statistically higher score for the health maintenance and disease control than the control groups. Thus, muscle relaxation was effective for the health maintenance and disease control (t=2.09, p=.004). This research showed that the muscle relaxation is a nursing intervention that can promote the physiological, psychological and social adaptation of the rheumatoid arthritis patients in terms of short-term and cognitive changes. However, more fundomental changes in behavior and long-term physiology could not be found through such a short-term relaxation treatment.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.502-508
• /
• 2005

Hypereutectic Al-Si alloys have been regarded attractive for automotive and aerospace application, due to high specific strength, good wear resistance, high thermal stability, low thermal expansion coefficient and good creep resistance. Spray casting of hypereutectic Al-Si alloy has been reported to provide distinct advantages over ingot metallurgy (IM) or rapid solidification/powder metallurgy (RS/PM) process in terms of microstructure refinement. In this study, hypereutectic Al-25Si-2.0Cu-1.0Mg alloy was prepared by OSPREY spray casting process. The change of strain rate sensitivity and Creep transition were analyzed by using the load relaxation test and constant creep test. High temperature deformation behavior of the hypereutectic Al-Si alloy has been investigated by applying the internal variable theory proposed by Chang et al. Especially, the creep resistance of spray casted hypereutectic Al-Si alloy can be enhanced considerably by the accumulation of prestrain.

• Composites Research
• /
• v.32 no.6
• /
• pp.382-387
• /
• 2019

A single frequency strain mode test, a stress relaxation mode test, and a creep test using RH-DMA were performed to investigate the effects of relative humidity and temperature on the viscous properties of PET film. The relative humidity was 10%, 30%, 50%, 70%, and 90%. The temperature was considered to be 30~95℃ for single frequency strain mode tests, 30℃ and 70℃ for stress relaxation mode test, and 5~95℃ for creep test. According to the results, higher relative humidity results in lower storage modulus and loss modulus, but the maximum value of the loss modulus is not significantly affected by changes in relative humidity and is almost constant. Relaxation modulus decreases rapidly at the beginning and becomes constant, and as the temperature increases, it is susceptible to changes in relative humidity. Strain recovery also increases rapidly at the beginning and is susceptible to changes in relative humidity as the temperature increases. In addition, as the temperature increases, the degree of increase in creep compliance increases, and as the temperature rises above the glass transfer temperature, the degree of increase becomes very large. The master curve determined by the time-temperature superposition provides the information to predict the long-term performance under operating conditions such as relative humidity and temperature.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1003-1005
• /
• 1998

We present the implementation of a Lagrangian Relaxation based large scale thermal Unit Commitment problem. The problem is decomposed into thermal subproblem by using Lagrangian multipliers. The thermal subproblem is solved by using dynamic programmmg. we perform a numerical test using the thermal system of KEPCO over a week (168 hours) period. The programming language used for the test program is C. The result is compared with the priority list method.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2016

Until recently, almost all ETFE film structures that have been erected is the cushion type because there are problems at lower allowable strength under elastic range and viscosity behaviour such as creep and relaxation of ETFE films under long-term stresses. But the number of tension type structures is currently increasing. This paper proposes the stretch fabrication of ETFE film to verify the applicability of ETFE films to tensile membrane structures. First of all, to investigate the possibility of application on tensile membrane structures, the stretch fabrication test is carried out, and it is verified that it is possible to increase the yield strength of the film membrane structures. After simulating the experiment also carries out an analytical investigation, and the effectiveness of the elasto-plastic analysis considering the viscous behavior of the film is investigated. Finally, post-aging tension measurement is conducted at the experimental facilities, and the viscosity behavior resulting from relaxation is investigated with respect to tensile membrane structures.

• Korean journal of food and cookery science
• /
• v.5 no.1
• /
• pp.49-52
• /
• 1989

Stress relaxation tests with different percent deformation were performed for crude and refined starch gels of acorn. With no relation to percent deformation, refined starch gel had higher initial stress ($\sigma_e$) and lower equilibrium stress ($\sigma_e$) than crude starch gel. But the ratio of equilibrium stress to initial stress ($\sigma_e$/$\sigma_o$) was minimum at 60 percent deformation. The analysis of relaxation curves by successive residual method revealed that the rheological behavior of acorn starch gels could be expressed by generalized Maxwell model. The element numbers of models for crude and refined starch gel were 7-element and 5-element at 60 percent deformation, and 5-element and 3-element at 45 percent deformation, respectively.

• Steel and Composite Structures
• /
• v.16 no.6
• /
• pp.703-718
• /
• 2014

The initial clamping forces of high strength bolts subjected to different faying surface conditions drop within 500 hours regardless of loading, any other external force or loosening of the nut. This study develops a mathematical model for relaxation confined to creep on a coated faying surface after initial clamping. The quantitative model for estimating relaxation was derived from a regression analysis for the relation between the creep strain of the coated surface and the elapsed time for 744 hours. This study establishes an expected model for estimating the relaxation of bolted joints with diverse coated surfaces. The candidate bolts are dacro-coated tension control bolts, ASTM A490 bolt, and plain tension control bolts. The test parameters were coating thickness, species of coating. As for 96, 128, 168, and $226{\mu}m$ thick inorganic zinc, when the coating thickness was increased, relaxation after the initial clamping rose to a much higher range from 10% to 18% due to creep of the coating. The amount of relaxation up to 7 days exceeded 85% of the entire relaxation. From this result, the equation for creep strain can be derived from a statistical regression analysis. Based on the acquired creep behavior, it is expected that the clamping force reflecting relaxation after the elapse of constant time can be calculated from the initial clamping force. The manufacturer's recommendation of inorganic zinc on faying surface as $75{\mu}m$, appears to be reasonable.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.641-646
• /
• 2001

In early-age concrete, volumetric deformations due to thermal expansion and moisture transfer are restrained by various boundary conditions, and then restraint stresses occur in proportion to developed stiffness. With increase of the age, these stresses are gradually relieved by significant relaxation behavior of early-age concrete. Therefore, it is necessary to consider the stress relaxation in order to analyze the behavior of early-age concrete more accurately. In this paper, we propose a unified algorithm which combines a relaxation model with hydration model, heat conduction model, micropore structure formation model, moisture diffusion model and mechanical properties development model and develop a finite element program based on the algorithm. The program is applied to evaluate stress development if a temperature-stress test machine (TSTM) specimen and a massive concrete structure, and then validity of the program is discussed and evaluated.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.2
• /
• pp.17-26
• /
• 2008

The traveling salesman problem is to find tours through all cities at minimum cost ; simply visiting the cities only once that a salesman wants to visit. As such, the traveling salesman problem is a NP-complete problem ; an heuristic algorithm is preferred to an exact algorithm. In this paper, we suggest an effective cost relaxation using a candidate arc set which is obtained from a regression function for the traveling salesman problem. The proposed method sufficiently consider the characteristics of cost of arcs compared to existing methods that randomly choose the arcs for relaxation. For test beds, we used 31 instances over 100 cities existing from TSPLIB and randomly generated 100 instances from well-known instance generators. For almost every instances, the proposed method has found efficiently better solutions than the existing method.