• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.712-713
• /
• 2017

Clinically applicable light emitting diode (LED) has been widely investigated because of relatively low heat generation, low cytotoxicity, and non-invasiveness compared to other therapeutic methods. Therefore, we investigated the therapeutic effects of several wavelengths of light emitting diode against human cervical cancer cells and analyzed the individual inhibitory effect for the cancer cell proliferation. In the experiment, prepared HeLa cells were exposed by red, green and blue light-emitting diode for 10 minutes each. Relatively short-wavelength light-emitting diode (blue) showed stronger therapeutic effects than relatively long-wavelength light-emitting diodes.

• Journal of Information Technology Applications and Management
• /
• v.25 no.2
• /
• pp.109-116
• /
• 2018

In this study, we was compared the reliability performance of the software reliability model, which applied the Goel-Okumoto model developed using the exponential distribution, to the logarithmic function modifying the intensity function and the Rayleigh form. As a result, the log-type model is relatively smaller in the mean squared error compared to the Rayleigh model and the Goel-Okumoto model. The logarithmic model is more efficient because of the determination coefficient is relatively higher than the Goel-Okumoto model. The estimated determination coefficient of the proposed model was estimated to be more than 80% which is a useful model in the field of software reliability. Reliability has been shown to be relatively higher in the log-type model than the Rayleigh model and the Goel-Okumoto model as the mission time has elapsed. Through this study, software designer and users can identify the software failure characteristics using mean square error, decision coefficient. The confidence interval can be used as a basic guideline when applying the intensity function that reflects the characteristics of the lifetime distribution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.323-329
• /
• 2004

In situ particle size and volume concentration of suspended sediment was measured at the mouth of Seomjin River Estuary In February 2001, using an optical instrument, 'LISST-100'. Time variation of in situ particle size and concentration shows: (1) during ebb tide, Seomjin River supplies relatively fine-grained particles with less-fluctuated, compared to during flood tide, and well-behaved concentrations following the tidal cycle; and (2) during flood tide, relatively coarse-grained particles with highly variable in size distribution and concentration flow upstream from Kwangyang Bay. This explains a poor correlation $(r^{2}=0.10)$ between sediment concentration and beam attenuation coefficient during flood and a high degree of correlation $(r^{2}=0.80)$ during ebb tide. Relatively fine grained and well defined, monotonous size distribution may promote the correlation between concentration and beam attenuation coefficient due to optical homogeneity of particles during ebb tide. Abundance of large aggregates with time-varying size and shape distributions may be mainly responsible for variations in optical properties of the sediment during flood tide, and thus may confound the relationship between the two variables. The difference in particle sizes and shapes between flood and ebb tides can also be observed on SEM images.

• Archives of Plastic Surgery
• /
• v.45 no.3
• /
• pp.214-221
• /
• 2018

Clarification is needed regarding the definitions and classification of groove and hollowness of the infraorbital region depending on the cause, anatomical characteristics, and appearance. Grooves in the infraorbital region can be classified as nasojugal grooves (or folds), tear trough deformities, and palpebromalar grooves; these can be differentiated based on anatomical characteristics. They are caused by the herniation of intraorbital fat, atrophy of the skin and subcutaneous fat, contraction of the orbital part of the orbicularis oculi muscle or squinting, and malar bone resorption. Safe and successful treatment requires an optimal choice of filler and treatment method. The choice between a cannula and needle depends on various factors; a needle is better for injections into a subdermal area in a relatively safe plane, while a cannula is recommended for avoiding vascular compromise when injecting filler into a deep fat layer and releasing fibrotic ligamentous structures. The injection of a soft-tissue filler into the subcutaneous fat tissue is recommended for treating mild indentations around the orbital rim and nasojugal region. Reducing the tethering effect of ligamentous structures by undermining using a cannula prior to the filler injection is recommended for treating relatively deep and fine indentations. The treatment of mild prolapse of the intraorbital septal fat or broad flattening of the infraorbital region can be improved by restoring the volume deficiency using a relatively firm filler.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.171-179
• /
• 2004

Micro-stereolithography technology has made it possible to fabricate a freeform 3D microslructure. This technology is based on conventional stereolithography, in which a UV laser beam irradiates the open surface of a UV-curable liquid photopolymer, causing it to solidify. In micro-stereolithography, a laser beam of a few $\mu m$ diameter is used to solidify a very small area of the photopolymer. This is one of the key technological elements, and can be achieved by using a focusing lens. Thus, the solidification phenomena of the liquid photopolymer must be carefully investigated. In this study, the photopolymer solidification phenomena in response to variations in the scanning pitch of a focused laser beam was investigated experimentally. The effect of layer thickness on the solidification width and depth was also examined. These studies were conducted under the conditions of relatively lower laser power and relatively higher scanning speed. Moreover, the photopolymer solidification phenomena for the relatively higher laser power and lower scanning speed was investigated, too. In this case, comparing to the case of lower laser power and higher scanning speed, the photopolymer absorbed large amount of irradiation energy of the laser beam. These results were compared with those obtained from a photopolymer solidification model. From these results, a new laser-scanning scheme was proposed according to the shape of the 3D model. Samples by each method were fabricated successfully.

• Journal of Korea Planning Association
• /
• v.53 no.7
• /
• pp.87-107
• /
• 2018

With more than 10 million inhabitants, in particular, Seoul, the capital of Korea, has already experienced a number of severe heat wave. To alleviate the potential impacts of heat wave and the vulnerability to heat wave, policy-makers have generally considered the option of heat wave strategies containing adaptation elements. From the perspective of sustainable planning for adaptation to heat wave, the objective of this study is to identify the elements of vulnerability and assess heat wave-vulnerability at the dong level. This study also performs an exploratory investigation of the spatial pattern of vulnerable areas in Seoul to heat wave by applying exploratory spatial data analysis. Then this study attempts to select areas with the relatively highest and lowest level of adaptive capacity to heat wave based on an framework of climate change vulnerability assessment. In our analysis, the adaptive capacity is the relatively highest for Seongsan-2-dong in Mapo and the relatively lowest for Changsin-3-dong in Jongno. This study sheds additional light on the spatial patterns of heat wave-vulnerability and the relationship between adaptive capacity and heat wave.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.252-261
• /
• 2019

In this study, we analyzed the factors affecting the introduction of Smart Factory by domestic SMEs through AHP analysis and tried to provide implications for the introduction of Smart Factory. It was confirmed that the manufacturing and introduction group, the non-manufacturing introduction group, and the already introduced group had the highest weight in the cost reduction in the first hierarchy standard. At this time, it can be seen that the weight for cost reduction is relatively high in the manufacturing introduction group and the introduction group, and the weight for the productivity improvement is relatively high in the non-manufacturing introduction group. It can also be seen that the portion of marketing enhancement does not have a significant impact on smart factory choices. It was confirmed that image enhancement is the highest in the manufacturing introduction group and the non-manufacturing introduction group in the first hierarchy standard, and the marketing has the highest weight in the introduction group. In the two - tiered standard, customer - friendly and proper inventory maintenance weights were relatively high in all the introduced groups, except for the high rankings.

• Asian Journal of Business Environment
• /
• v.11 no.3
• /
• pp.21-32
• /
• 2021

Purpose: Research aims to analyze the influence of ICT on regional economic growth in Indonesia Provinces are grouped using Klassen's typology, which divides four quadrants based on economic growth and GRDP per capita. Considering similarity characteristics, four typology categories are finally simplified into two named categories: the "rapidly developed and growing" region and the "relatively lagged" region. Research design, data and methodology: The study uses panel data of 33 provinces in Indonesia from 2012 to 2018. It employs panel regression analysis to determine the impact of ICT on the regional economic growth of both regions. Results: The study reveals the percentage of households that own computer and the percentage of households who have accessed the internet in the last three months have a positive and significant influence on the GRDP per capita in the "relatively lagged" region. Meanwhile, mean years of schooling has a positive and significant impact on both regions. Conclusions: In the "rapidly developed and growing" region, only mean years of schooling has a positive and significant effect on GRDP per capita, whilst in the "relatively lagged" region, percentage of households that own computer, percentage of households who have accessed the internet in the last three months, and mean years of schooling have a positive and significant impact on GRDP per capita in Indonesia.

• Animal Systematics, Evolution and Diversity
• /
• v.38 no.4
• /
• pp.214-221
• /
• 2022

Six species in five families of Lepidoptera were newly recorded from Korea. The adult specimens of these six species were obtained during the rearing caterpillars collected across Korea. Agonopterix omelkoi Lvovsky (Depresariidae) can be distinguished by the ochreous forewing with a dark brown slanted line, a dark brown triangular spot, and a blackish discal dot, and the whitish hindwing. Dichomeris ferruginosa Meyrick (Gelechiidae) can be diagnosed by the light brown forewing with two relatively large blackish dots and suffusion of dark brown along the dorsum and subtermen, and the grayish hindwing. Pseudohedya satoi Kawabe (Tortricidae) can be diagnosed by the dark ochreous forewing with several medially curved dark ochreous medial lines, and the large light grayish tornal marking, and the dark grayish hindwing. Rhodoneura hyphaema (West) (Thyrididae) can be diagnosed by the reddish forewing with a relatively thick postmedial band, and the reddish hindwing with a narrow dark reddish straight medial band. Comibaena subprocumbaria (Oberthür) (Geometridae) can be diagnosed by the greenish forewing with a whitish apical marking that bordered with a brownish or dark reddish line that connected to the termen, and the distal abdominal segments with whitish and dark reddish dots. Perixera absconditaria (Walker) (Geometridae) can be diagnosed by the light brownish forewing with a relatively thick, slanted, dentate brownish postmedial line, and the light brownish hindwing with a small white discal spot. We provide the diagnosis and figures of adults and larvae, and DNA barcoding data.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.209-224
• /
• 2022

In this study, the numerical analysis model of π-beam explosion is established to compare and analyze the failure modes of the π-beam under the action of explosive loads, thus verifying the accuracy of the numerical model. Then, based on the numerical analysis of different protection forms of π beams under explosive loads, the peak pressure of π beam under different protection conditions, the law of structural energy consumption, the damage pattern of the π beam after protection, and the protection efficiency of different protective layers was studied. The testing results indicate that the pressure peak of π beam is relatively small under the combined protection of steel plate and aluminum foam, and the peak value of pressure decays quickly along the beam longitudinal. Besides, as the longitudinal distance increases, the pressure peak attenuates most heavily on the roof's explosion-facing surface. Meanwhile, the combined protective layer has a strong energy consumption capacity, the energy consumed accounts for 90% of the three parts of the π beam (concrete, steel, and protective layer). The damaged area of π beam is relatively small under the combined protection of steel plate and aluminum foam. We also calculate the protection efficiency of π beams under different protection conditions using the maximum spalling area of concrete. The results show that the protective efficiency of the combined protective layer is 45%, demonstrating a relatively good protective ability.