• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.173-179
• /
• 2016

Purpose: This study is to help assist in the management of optical shops by using the importance sequence of optical shop selection attributes, which is related to the consumer's selection method of consumer, and by using the importance sequence of optical shop information sources which is related to a route for optical shop selection. Methods: Customer surveys were conducted from March 10 to March 31, 2015 targeting customers who have visited an optical shop in Seoul and Northern Gyeonggi-do regions. The analys method was descriptive statistics and data were analyzed by utilizing SPSS v.10.0 statistical package program. Results: The highest ranking five attributes among the importance of optical shop selection are "friendliness and politeness of staff", "cleanliness of an optical shop", "quick resolution of customer's complaints by staff", "eyes examination and glasses dispensing skill of staff", "customer's complaints and claims handling". The lowest ranking five attributes among the importance of optical shop selection are "provide free gifts", "scale or size of an optical shop", "opening time and closing time", "convenient parking facilities", "favorable countenance of staff". The two highestr ranking criteria among the importance of optical shop information sources are "previous utilization experience", "recommendation by a relative, a friend and a family etc". The two lowest ranking criteria among the importance of optical shop information sources are "advertisement" and "spatial exterior view of optical shop". Conclusions: It is shown that the important thing in management of an optical shop is an inner caliber like ability of ophthalmic optician, interaction with customers, and previous utilization experience rather than external factors like advertisement, exterior view, and bonus gift.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.144-150
• /
• 2014

Purpose : Intramedullary spinal lesions in the conus medullaris (CM), including tumors and vascular lesion, are rarely reported. We reported various MR features of intramedullary spinal cord lesions involving the CM including ependymoma, hemangioblastomas, dermoid cyst, ventriculus terminalis and spinal AVF and tried to discuss them for differential diagnosis. Materials and Methods: Six patients (male: female = 4:2, mean age = 44.3 year old) were enrolled from the clinical database of our institute from 2004 to 2010 and their radiological images and clinical symptoms were reviewed retrospectively. All patients had taken initial and postoperative MRI with contrast enhancement using gadopentate dimeglumine (Gd-DTPA). These images were analyzed by tumor size, location, signal intensity relative to the spinal cord, vascular flow voids, syrinx or cyst, edema and enhancement pattern. Results: Contrast enhancement was seen in all intramedullary masses. An eccentric enhancing nodule was noted in two hemangioblastomas and unusual peripheral rim enhancement with septation was seen in ventriculus terminalis. Patchy enhancement of the CM was observed in spinal arteriovenous fistula (AVF). Extensive cord edema adjacent to the intramedullary lesions was seen in four cases and syrinx was noted in three cases. Vascular signal voids were found in two hemangioblastomas and one spinal AVF. Conclusion: In evaluation of intramedullary spinal lesions in the CM, it is necessary to consider these unusual MR findings and discriminate various pathologies with prudence and caution.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1589-1595
• /
• 2014

Objective: Forkhead box C2 (FOXC2) is a member of the winged helix/forkhead box (Fox) family of transcription factors. It has been suggested to regulate tumor vasculature, growth, invasion and metastasis, although it has not been studied in cervical cancer. Here, we analyzed FOXC2 expression in cervical tissues corresponding to different stages of cervical cancer development and examined its correlation with clinicopathological characteristics. In addition, we examined the effects of targeting FOXC2 on the biological behavior of human cervical cancer cells. Methods: The expression of FOXC2 in normal human cervix, CIN I-III and cervical cancer was examined by immunohistochemistry and compared among the three groups and between cervical cancers with different pathological subtypes. Endogenous expression of FOXC2 was transiently knocked down in human Hela and SiHa cervical cells by siRNA, and cell viability and migration were examined by scratch and CCK8 assays, respectively. Results: In normal cervical tissue the frequency of positive staining was 25% (10/40 cases), with a staining intensity (PI) of $0.297{\pm}0.520$, in CIN was 65% (26/40cases), with a PI of $3.00{\pm}3.29$, and in cancer was 91.8% (68/74 cases), with a PI of $5.568 {\pm}3.449$. The frequency was 100% in adenocarcinoma (5/5 cases) and 91.3% in SCCs (63/69 cases). The FOXC2 positive expression rate was 88.5% in patients with cervical SCC stage I and 100% in stage II, showing significant differences compared with normal cervix and CIN. With age, pathologic differentiation degree and tumor size, FOXC2 expression showed no significant variation. On transient transfection of Hela and SiHa cells, FOXC2-siRNA inhibition rates were 76.2% and 75.7%; CCK8 results showed reduced proliferation and relative migration (in Hela cells from $64.5{\pm}3.16$ to $49.5{\pm}9.24$ and in SiHa cells from $60.1{\pm}3.05$ to $44.3{\pm}3.98$) (P < 0.05). Conclusion: FOXC2 gene expression increases with malignancy, especially with blood vessel hyperplasia and invasion degree. Targeted silencing was associated with reduced cell proliferation as well as invasion potential.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.785-790
• /
• 2015

As an alternative to large-scale clear cutting silviculture, strip clear cutting (SC) is being considered as a system compatible with ecological conservation and forest regeneration. In South Korea, application and effectiveness of SCC in varying forest types were rarely found. In this study, under the subject of strip clear cutting lands of pinus densiflora forest at Samcheok, Gangwon-do Province, the developmental aspect of low vegetation prior to and after deforestation and the correlation between environmental factor and pine regeneration were analyzed. The cover rate of understory vegetation was appeared to be increased after deforestation and rapidly increased two years after deforestation, and it was evaluated to be affected by vigorous tree species and photophilic species. From the perspective of relative importance value, Quercus mongolica, Artemisia keiskeana, and Rubus crataegifolius that influence the cover rate showed the inclination of continuous growth. The diversity of species showed increment inclination as well due to introduction and settlement of early transient species. As a result of analyzing the correlation between vegetation and environmental factor and generation of pine tree size, the soil exposure rate, intensity of light, and canopy openness showed positive relationship, and the understory vegetation cover and woody debris cover rate showed negative relationship.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.196-207
• /
• 2016

In monsoon climates, persistent shade is a troublesome weather condition with an impact on the growth and yield of corn (Zea mays L.). We imposed 7, 14, 21, and 28 days of consecutive shade (CS) on Gwangpyeongok and P3394 corn hybrids at the beginning of the kernel filling stages. Shade had little impact on leaf area and dry matter accumulation in the stem and leaves. However, dry matter accumulation in the ear was severely reduced by approximately 28% and 53% after 14 and 28 days of CS, respectively. For the components of grain yield, 7 and 14 days of shade did irreparable damage to the number of filled kernels, the kernel number per ear row, and the percent of filled kernels, but did little damage or reversible damage after removal of the shade to the 100-grain weight and the row number per ear. Shade significantly reduced the relative growth rate (RGR) due to a decrease in the net assimilation rate (NAR). These results suggest that source activity limitation by shade during the kernel filling stages leads to the inhibition of sink activity and size. The yield of biomass, ear, and grain logistically declined as the length of CS increased. Probit analysis revealed that the number of days of CS needed to cause 25% and 50% reductions in grain yield were 3.7 and 23.1, respectively. These results suggest that the plant yield loss induced by shade at the beginning of the kernel filling stages is mainly achieved within the first 7 days of consecutive shade.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.227-230
• /
• 2013

The phase change of $(U_{1-x}Nd_x)_3O_8$ powder produced by oxidation of Nd-doped $UO_2$ pellet at $500^{\circ}C$ was investigated by high temperature oxidation heat treatment at $900{\sim}1500^{\circ}C$ under an air atmosphere. The XRD analysis results showed that the formation of $(U_{1-y}Nd_y)O_{2+z}$ phase and $U_3O_8$ phase from metastable $(U,Nd)_3O_8$ phase initiated at a temperature of $1000^{\circ}C$. The relative integrated intensity of $(U_{1-y}Nd_y)O_{2+z}$ phase to $U_3O_8$ phase increased with increasing of the oxidation temperature from 1100 to $1500^{\circ}C$. And also, it was found from the SEM observation that the particle size of $(U_{1-y}Nd_y)O_{2+z}$ phase increased with increasing of the oxidation temperature. However, electrone probe X-ray microanalyzer (EPMA) analysis results showed that Nd contents in $(U_{1-y}Nd_y)O_{2+z}$ phase decreased with increasing of the oxidation temperature. This behavior on the ground of XRD, SEM, and EPMA analysis data could be interpreted in terms of the transportation of U ions from $U_3O_8$ phase into $(U_{1-y}Nd_y)O_{2+z}$ phase through the interface of two phases during high temperature oxidation.

• Korean Journal of Ecology and Environment
• /
• v.53 no.2
• /
• pp.148-155
• /
• 2020

In this study, we analyzed the effects of the presence or absence of weirs on fish assemblages in wadeable streams (Stream order 1^st~4^th). More specifically, we investigated these effects by evaluating the differences in stream size. The results showed differences in the fish assemblages in third or higher order streams (PERMANOVA, P<0.005). The presence or absence of weirs mainly affected variables such as the number of species the individuals, and species richness index, whereas no difference was observed in the populations of exotic, endemic, and endangered species. A SIMPER analysis showed that the common species Zacco platypus, Zacco koreanus, and Pungtungia herzi are dominant in their corresponding streams (contribution>5%), and that these are the main contributors to differences among the fish assemblages. All these species showed high relative abundances at the sites with weirs. Altered environments by the presence of weirs provided these species with concentrated habitats. In summary, this study analyzed the effects of weirs on fish assemblages on a broad, nationwide, scale, and these results can effectively aid future studies on the specific effects of weirs.

• Journal of Environmental Impact Assessment
• /
• v.22 no.6
• /
• pp.547-556
• /
• 2013

Recently, golf courses have increased over the years because golf became popular leisure sport. Various environmental problems have been then issued by a golf course during constructing and running them. A problem of pesticide, which is serious among various environmental problems, from golf course has harmful effect on surrounding area and makes human suffer from acute and chronic diseases. Pesticides are used for the cost-effective managing of golf course and the amount of pesticides also increases as the number of golf course increase. Since the assessment of pesticides on near-by surrounding has been focused on water and soil media, studies related to atmospheric dispersion have been hardly attempted. The method to assess an impact of pesticide nearby agricultural production by the atmospheric dispersion using AGDISP(AGricultural DISPersal) model was developed and applied to the actual planned golf course located in Hongcheon, Gangwon. For implementing AGDISP, parameters were investigated from the golf course's land use planning map, pesticide spray device, Hong-Cheon weather station and etc. First of all, a kind of pesticide, a form of spraying pesticide, geographical features, weather data, and distance(golf course to plantation) were investigated to understand how to work these parameters in AGDISP. Restricted data(slope angle, droplet size distribution and solar insolation) sensitivity analysis of these parameters to estimate effect of pesticide nearby a plantation and a high relative contribution data of analyzed data was selected for input data. Ethoprophos was chosen as the pesticide used in the golf course and the amounts of pesticide deposition per annual agricultural productions were predicted. The results show that maximum amount of pesticide deposition through atmospheric dispersion was predicted $2.32{\mu}/m^2$ at 96 m where the nearest organic plantation exists. The residues of pesticide were also estimated based on the annul production of the organic and the deposition amount of the pesticide. Consequently, buckwheat, wheat and millet were likely to exceed maximum residue limits for pesticides in foods(MRL) and sorghum, corn and peanut were likely to exceed MRL by organic farming as well.

• School Mathematics
• /
• v.12 no.3
• /
• pp.273-299
• /
• 2010

The purpose of the study is designing and implementing 'Sampling Distributions Simulation' to help students to understand concepts of sampling distributions. This computer simulation is developed to help students understand sampling distributions more easily. 'Sampling Distributions Simulation' consists of 4 sessions. 'The first session - Confidence level and confidence intervals - includes checking if the intended confidence level is actually achieved by the real relative frequency for the obtained sample confidence intervals containing population mean. This will give the students clearer idea about confidence level and confidence intervals in addition to the role of sampling distribution of the sample means among those. 'The second session - Sampling Distributions - helps understand sampling distribution of the sample means, through the simulation method to make comparison between the histogram of sampling distributions and that of the population. The third session - The Central Limit Theorem - includes calculating the means of the samples taken from a population which follows a uniform distribution or follows a Bernoulli distribution and then making the histograms of those means. This will provides comprehension of the central limit theorem, which mentions about the sampling distribution of the sample means when the sample size is very large. The forth session - the normal approximation to the binomial distribution - helps understand the normal approximation to the binomial distribution as an alternative version of central limit theorem. With the practical usage of the shareware 'Sampling Distributions Simulation', we expect students to have a new vision on the sampling distribution and to get more emphasis on it. With the sound understandings on the sampling distributions, more accurate and profound statistical inferences are expected. And the role of the sampling distribution in the inferences should be more deeply appreciated.